Ultimate Support APEX Series User manual

8
Revision 1, 9.01.10 . Product Manual Item #APEX-M
APEX®
KEYBOARD
STAND SERIES
Product Manual
for Ultimate Support
AX-90B
ITEM #16761
black pearl
AX-90OR
ITEM #16763
orange
AX-90P
ITEM #16765
pewter
AX-90W
ITEM #16766
white pearl
AX-90BL
ITEM #16768
blue
AX-90R
ITEM #16769
red
BOOM NOT
INCLUDED
CAUTION: To preserve color finish on stand use tote bag and
instruction provided for setup and TIER down in manual.
800.525.5628 . www.ultimatesupport.com . Copyright 2010, Ultimate Support Systems . All Rights Reserved
warranty registration
Visit www.ultimatesupport.com for a quick and convenient process for registering your new
Ultimate Support product. Warranty Registration and Proof of Purchase are required for warranty
fulfilment. Full Limited Lifetime Warranty and Ultimate Protection Plus Premium Service and
Support Plan details are available online under Music Gear & Instrument Stands / Customer Support.

APEX® STAND & TOTE BAG
APEX STAND STORES IN TOTE BAG FOR PROTECTION
Small Handle
Apex in Standing Position
STEP 1
Lay your Apex Tote Bag on the ground with handle facing up. Unzip end of bag
exposing all four legs. DO NOT REMOVE TOTE BAG YET!
STEP 2
Locate Leg Extension Buttons on inside of Apex legs. Push Button in and extend
legs. Make sure legs are fully extended. DO NOT REMOVE TOTE BAG YET!
STEP 3
Fold legs out until they lock in position. DO NOT REMOVE TOTE BAG YET!
STEP 4
Pull Apex Stand up onto it’s legs using the small handle on tote bag. Do not remove
the bag until the stand is in an upright position.
STEP 5
Pull tote bag off stand.
Front Zipper
Handle Facing Up!
1
4
5
Legs Fully Extended
Leg Extension Button
2
Legs In Locked Position
3
32

APEX® ARMS & ADJUSTMENTS
ADJUST HEIGHT, LENGTH, AND ANGLE
STEP 6
Press red release button to pop cap and pull out arms. Snap arms into place,
adjustment buttons face down, and logos on arms read right side up. Make sure
arms are locked into position by pulling back on arms.
STEP 9
To adjust arm angle pull the nob on the desired side. Snap arm into place aligning
red lines. Repeat for remaining arms.
STEP 10
To adjust arm length push in buttons on bottom of arms and adjust out or in.
STEP 11
Place cord to
keyboard down
center of stand
and turn clips to
lock in place.
STEP 7
Twist Keyboard End Stops to hold keyboard in place. Keyboard End Stops must be
folded back for storage.
STEP 8
To adjust the tier height pull on both nobs on front side of tiers at the same time.
Adjust up or down to desire height. At desired height release nobs and press down
to ensure locked position. 54
6 9
10
11
7
4 Locking Positions
Release
Button
Keyboard End
Stopper Locked
Keyboard End
Stopper
Angle Nob
Angle Nob
Back View
Cord clip
Cord clip
Side View
Arms
8
Up & Down
Nob
Up & Down
Nob
Front View Side View
Up & Down
Nob
Keyboard cord
Keyboard cord
Adjustment Button
Adjustment Button
UNLOCKED
LOCKED

APEX® TEAR DOWN APEX® ACCESSORIES
FOLDS UP FOR CONVENIENT STORAGE TOTE BAG & TELESCOPING BOOM
76
STEP 1
Twist Keyboard End Stops to closed position. Keyboard End Stops must
be folded back for storage.
STEP 2
Press red button below arm and pull to detach arm. Press red top
button to pop cap and place arms inside. Arm end with logo goes in
first. Arms should fit easily in holes. If top does not close check arms
to make sure they are properly put into holes.
ARMS NEED TO BE IN THE PROPER ORIENTATION.
STEP 3
Slide bag over stand. Handle should be facing front and on same
side as longer legs.
STEP 4
Standing behind of stand pull tote bag towards you while walking
backward and lay tote bag on ground. Handle should be on top.
STEP 5
Release legs so that they are ready to be pushed in.
STEP 6
Push legs in until they snap inside stand. Zip up bag for next use.
AX-90MIC BOOM
Telescoping “Ulti-boom” utilizes height adjustment channel inside of the New Apex
body. Super clean looks combined with perfect functionality. Quickly detaches and
stores in protective Apex Bag pocket.
• AX-90MIC #17222
• Telescoping boom length 18.9” - 33.9”
(480 mm - 860 mm)
AX-90BAG TOTE BAG
Bag designed to aid in set-up and TIER-down, protecting the stand’s finish. Simply
store the tiers inside the top of the stand and slip the bag over the top. Laying the
bag down with the stand inside, store the legs in the bottom and zip up the bag end.
Bag has top end handle and carrying strap.
• AX-90BAG #17263
• Heavy-duty, padded and zippered Tote Bag. Holds one AX-90
Series Column Keyboard Stand, plus one AX-90MIC boom.
-Not included
-Available Separate
-Included with all Apex Stands
Top view of leg
storage
Logo on arm
Do not slam legs into stand – this can cause the locking tabs to drop into
the leg itself. If this occurs, please contact Customer Support for assistance.