Ultra Plus 700HDMI PVR User manual

Digital Satellite Receiver
User's Manual
700HDMI PVR

3
INDEX
INDEX................................................................................................................................... 3
Precautions ......................................................................................................................... 5
1. Important Safety Instructions...................................................................................................... 5
2. Notice ......................................................................................................................................... 5
3. Copyright .................................................................................................................................... 6
4. Disclaimer................................................................................................................................... 6
Before You Begin ................................................................................................................ 7
1. Main Features ............................................................................................................................ 7
2. Accessories ................................................................................................................................ 8
Hardware Description ......................................................................................................... 9
1. Front Panel Configuration .......................................................................................................... 9
2. Rear Panel Configuration ......................................................................................................... 10
3. Remote Control Unit................................................................................................................. 11
Connections Diagram ....................................................................................................... 14
1. Receiver to TV.......................................................................................................................... 14
2. Connecting to Dish ................................................................................................................... 15
2.1 Using Single DISH .............................................................................................................. 15
2.2 Using DiSEqC switch .......................................................................................................... 15
2.3 Using DiSEqC motor ........................................................................................................... 16
Guide of Functions ........................................................................................................... 17
1. Select Service .......................................................................................................................... 17
1.1 Using UP/DOWN buttons.................................................................................................... 17
1.2 Using NUMERIC buttons .................................................................................................... 17
1.3 Using Service List ............................................................................................................... 17
2. Information Window.................................................................................................................. 17
3. Multi-Picture Display. ................................................................................................................ 17
4. Electronic Program Guide (EPG) ............................................................................................. 18
5. Satellite List .............................................................................................................................. 18
6. Favorite Group ......................................................................................................................... 18
7. Volume Control ......................................................................................................................... 18
8. Pause ....................................................................................................................................... 18
9. Subtitle...................................................................................................................................... 19
10. Audio Track .............................................................................................................................. 19

4
PVR (Personal Video Recorder) Function ....................................................................... 20
1. Recording ................................................................................................................................. 20
1.1 Recording methods ............................................................................................................. 20
1.2 Instant Recording ................................................................................................................ 21
1.3 Recording Edit..................................................................................................................... 21
1.4 Long Time Recording .......................................................................................................... 21
1.5 Pause during Recording...................................................................................................... 22
2. Time Shifting............................................................................................................................. 23
3. Playback (Play List).................................................................................................................. 24
4. Bookmark ................................................................................................................................. 24
5. Trick mode................................................................................................................................ 25
Guide of Main Menu.......................................................................................................... 26
1. Configuration ............................................................................................................................ 26
1.1 Time Setting ........................................................................................................................ 26
1.2 Timer Manager .................................................................................................................... 26
1.3 UI (User Interface) Setting .................................................................................................. 27
1.4 Parental Control .................................................................................................................. 27
1.5 Language Setting ................................................................................................................ 28
1.6 A/V Output Setting .............................................................................................................. 28
2. Installation ................................................................................................................................ 28
2.1 Dish Setting ......................................................................................................................... 28
2.2 Positioner Setting ................................................................................................................ 29
2.3 Service Search.................................................................................................................... 30
2.4 System Recovery ................................................................................................................ 31
2.5 System Information ............................................................................................................. 31
3. Utilities ...................................................................................................................................... 31
3.1USB ..................................................................................................................................... 31
3.2 Data Transfer....................................................................................................................... 32
3.3 Recording Option ................................................................................................................ 32
3.4 Calendar.............................................................................................................................. 32
3.5 Calculator ............................................................................................................................ 32
4. CA............................................................................................................................................. 33
4.1 Conax smart card menu...................................................................................................... 33
4.2 Smart card information........................................................................................................ 33
5. Service List............................................................................................................................... 33
5.1 Service List manager .......................................................................................................... 33
5.2 Service List Option .............................................................................................................. 35
Troubleshooting................................................................................................................ 36
Specifications.................................................................................................................... 37

5
Precautions
1. Important Safety Instructions
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, stoves, or other apparatus (including amplifiers)
that produce heat.
Protect the power cord from being walked on or pinched particularly at plugs, and the point where
they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
WARNING : To Prevent fire or shock hazard do not expose the set to rain or moisture.
2. Notice
Do not attempt to service this product by yourself. Do not remove the cover. Refer all serving to
qualified service agents.
These servicing instructions are for use by qualified service personnel only. To reduce the risk of
electric shock, do not perform any servicing other than that contained in the operating instructions
unless you are qualified to do so.

6
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as
vases, shall be placed on the apparatus.
The mains plug is used as the disconnect device. The disconnect device shall remain readily operable.
To reduce the risk of electric shock, do not remove
the cover (or back).
No user serviceable parts are inside.
Refer servicing to qualified service personnel.
The Lightning Flash with arrowhead symbol
within an equilateral triangle, is intended to
alert the user to the presence of un-insulated
"dangerous voltage" within the product
enclosure that may be of sufficient magnitude
to constitute a risk of shock to persons
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the product
3. Copyright
This manual is protected by copyright laws.
Copy, use and reproduction of this manual in part or whole without Manufacturer’s prior written
approval are prohibited.
4. Disclaimer
The manufacturers, distributors and agents are not liable for any kind of damage caused by the
use of the information contained in this manual.
The instruction and descriptions which this manual contains are based on the time of this
manual's production.
The manufacturer may update it with new functions and technology.
All the specifications are subject to change without prior notice.

7
Before You Begin
1. Main Features
Digital Satellite Receiver with 1 Card Reader
Time Shifting with External USB 2.0 Devices (Up to 2 Hours)
Recording & Playback with External USB 2.0 Devices
Event Recording by EPG
Simultaneous Recording and Time Shifting
Simultaneous Recording and Playback
HDMI output (576i output only)
MPEG-II Digital & Fully DVB Compliant
Blind scan
Multi-LNB controlled via DiSEqC 1.0, 1.1, 1.2 and USALS
Multi-Satellite Search
Supports EPG (Electronic Program Guide)
On-Screen Display with high resolution 16bit Colour.
Favorite Service Groups
Service Sorting by Name, Transponder and CAS
Multi-language Supported ( OSD & Menu )
Teletext Support
Suppots upto 10,000 services
Multi-picture Display
USB 2.0 Host Support(MP3 Player & JPEG Viewer)
Parental Lock / System Lock / Installation Lock
CVBS, RGB and YPbPr Video & Audio Output via TV SCART
Software & Service Database upgrade via USB

8
2. Accessories
NOTE : If any accessories listed above are missing, contact the sales representative where you
purchased this unit.
User's Manual Remote Control
AAA size Batteries X2

9
Hardware Description
1. Front Panel Configuration
1. USB (Front) : Use it when connecting to external USB storage device.
2. SMART Card Reader : Insert smart card for encrypted service access.
3. POWER Button :
Press to switch between STANDBY and POWER ON modes.
4. CH Up/Down Button:
Press to change services in normal mode, to move the highlighted-bar UP/DOWN in menu mode.
5. STANDBY / REMOTE Indication LED (RED / GREEN):
The LED lights RED in standby mode. / The LED lights GREEN when a key on the Remote Control is
pressed.
6. Remote Sensor :
Receives signal from remote controller.

10
2. Rear Panel Configuration
1. LNB IN :
Use to connect a satellite antenna.
2. LNB OUT :
Use it when connecting to another STB for loop-through.
3. TV SCART:
Use to connect to the TV via a SCART cable.
4. HDMI:
Use to connect to an HDMI input on a TV.
5. RS-232C :
Use it when connecting to your PC.

11
3. Remote Control Unit
1. POWER: Turns the STB On/Off.
2. MUTE: Turns the sound On/Off.
3. MODE
a. UHF: Reserved.
b. SLEEP: To adjust sleep timer.
c. TV/STB: Reserved.
d. TV/RADIO: Switches between TV and Radio.
4. NUMERIC Keys: Used to enter numerical data and zap to services directly.
5. EPG (Electronic Program Guide): Show the TV/Radio program guide.
6. INFO: Shows information relating to the current program. If you press it again, more detailed
information will be shown.

12
7. MENU: To enter the main menu or to move to the previous menu.
8. EXIT: Exit from the menu or pop-up window.
9. OK: Shows the service list in non-menu mode and select an item or confirm an operation in menu
mode.
10. ARROW: Moves the selection bar in the menu, also used to change services (UP/DOWN) or change
audio volume (LEFT/RIGHT).
11. PAGE UP/DOWN: Move to the next or previous page if more than one page is available. PAGE UP key
is also used as a hot-key to move to the Timer Manager Menu (Refer to Page 26, 1.2 Timer Manager).
And the PAGE DOWN key is also used as a hot-key to evoke the Picture Adjustment window (Refer to
Page 28, 1.6 A/V Output Setting).
12. RECALL: Moves to previous service.
13. SAT : Shows the service list.
14. FAV: To change the favorite groups.
15. COLOR Keys: Used for special functions in the menu. The RED key is used to add or delete the current
position when setting bookmarks. The GREEN key is used to go to the next bookmark position. The
BLUE key is used to display multiple pictures.

13
16. PLAY LIST: To display recorded service list.
17. SUBTITLE: To show multilingual subtitles.
18. TELETEXT: To show the digital teletext.
19. PAUSE: This key is used to pause the video. Press once more to resume the video.
20. PREV FILE: To play the previous MP3 file in MP3 play mode.
21. NEXT FILE: To play the next MP3 file in MP3 play mode.
22. REWIND: Rewind when the progress bar is displayed. This key starts reverse playback and can be
used to change the speed of reverse playback.
23. FAST FORWARD: Start fast forward or fast motion playback. It can also be used to change the speed
of forward playback.
24. RECORD: To start recording.
25. PLAY: Displays the playback progress bar when no progress bar is displayed. It can be used to start
playback at normal speed or return to normal speed from trick mode.
26. STOP: To stop time shifting, play back or recording.
NOTE: When inserting batteries, make sure that the polarity (+/-) is correct.

14
Connection Diagram
1. Receiver to TV
Connect the satellite antenna cable to LNB IN.
Connect the TV SCART to SCART of TV.
If your TV have a HDMI input, connect the HDMI to TV

15
2. Connecting to Dish
2.1 Using Single DISH
Connect the Satellite Antenna cable to LNB IN.
2.2 Using DiSEqC switch
Connect the cable of DiSEqC switch to LNB IN.

16
2.3 Using DiSEqC motor
Connect the cable of DiSEqC motor to LNB IN.

17
Guide to Functions
1. Select Service
To select the desired service, you can use the methods detailed below.
1.1 Using UP/DOWN buttons
You can navigate between services using the UP/DOWN buttons. Whenever you press the UP (DOWN)
button, the current service will be changed to next (previous) service. You have to press the UP or DOWN
button until find the service you want.
1.2 Using NUMERIC buttons
If you know the service number, enter the number directly using
NUMERIC buttons.
1.3 Using Service List
To select the desired service in the service list, you should firstly
display the service list using OK button. Use ARROW buttons to
select a desired service and press OK button.
In the Service List window, you can also use additional functions via the COLOUR buttons. Pressing the
RED button, allows you to sort the services by Name, Transponder, Group and CAS. Pressing the GREEN
button, allows you to add the service to one of 10 favorites.
2. Information Window
If you want to view the current service information window press
the INFO button. The Information window is automatically
displayed when changing services. This window contains items
such as service number, service name, and indicators for encrypted
service, Teletext available, subtitles available, Dolby Digital, as well
as duration information and other details. Press the INFO button
once more, for more detailed information.
3. Multi-Picture Display.
Press the BLUE button to display multiple pictures and the RED
button to toggle between 9 and 12 multi picture modes.

18
4. Electronic Program Guide (EPG)
The Electronic Program Guide (EPG) helps you navigate
through all the possible viewing options.
The EPG supplies information such as program listings,
start/end times and detailed information about the program
listings for all available services. The availability and amount of
these program details will vary, depending on the particular
broadcaster.
If you press the EPG button, the EPG menu will be displayed.
Press the ARROW buttons to move to other services or to move to the previous/next program.
Press the EPG button once to view the multichannel EPG (Electronic Program Guide) and press the
EPG button twice to view only the selected channels EPG information. Press the EPG button again to
toggle back and forth.
Press the GREEN button to view next days EPG and the RED button to view the EPG for the previous
day.
Select the program you wish to schedule by using the ARROW buttons then set the timer by pressing
OK.
5. Satellite List
Press the SAT (satellite) button to view all satellite listings. Scroll through the various satellites using the
ARROW buttons, and select the appropriate satellite by pressing OK.
6. Favorite Group
Press the FAV (favorite) button to view all favorite groups. Scroll through the various favorite groups
using the ARROW buttons, and select the appropriate favorite group by pressing OK.
7. Volume Control
To control the volume while you are watching a service, press the LEFT/RIGHT buttons to decrease or
increase the volume.
When the volume is being controlled the Volume control bar will appear at the top of the screen.
When necessary, press the MUTE button to turn audio on/off.
8. Pause
The PAUSE button is used to freeze the video. Press the PAUSE button again to resume the video.

19
9. Subtitle
To display Subtitles press the SUBTITLE button on your remote control. Subtitles are based on the
transmitted data.
10. Audio Track
You can display the audio language list by pressing the AUDIO button. Use the ARROW buttons to
choose the audio track from the list then press OK to change.

20
PVR (Personal Video Recorder) Function
1. Recording
1.1 Recording methods
There are two types of recording method.
(Time Reserved Recording / Event Reserved Recording).
Time Reserved Recording :
-In the Timer Manager you schedule a recording by setting
the time and duration as well as the channel you wish to be
recorded.
(Main Menu > Configuration > Timer Manager)
-Press GREEN button to activate a new timer edit screen.
-In the Timer Edit screen you may choose the start date/time,
duration, service, type (Recording/Play) and simply press
the Yes button to schedule your recording. Also, you must
set the duration to a minimum of 3 minutes; and start time
must be at least 3 minutes after the present time.
Event Reserved Recording :
The EPG screen allows you to choose the event you wish to
reserve or record.
-During LIVE TV press the EPG button to access the EPG
screen.
-Go to the event which you wish to view and then press OK.
The event will be reserved with BLUE play icon. This BLUE
play icon means that you want to just watch the event at
the reserved time.
BLUE play icon