UNEEKOR EYE MINI User manual

USER MANUAL
Important: Read before us-

EYE MINI USER MANUAL
We received your feedback and engineered the most innovative, versatile,
and accurate portable launch monitor. Whether going to the range or
taking your simulation room to the next level, the EYE MINI is here to help
you analyze and improve every aspect of your golf game.
MASTER YOUR PASSION
The EYE MINI user manual is designed to assist you in better
understanding your launch monitor, different set-up methods,
installation, operation, and proper storage.
GOLF YOUR WAY
THANK YOU FOR SUPPORTING THE EYE MINI

What’s Included
License Registration
EYE MINI Overview
Get Familiar
Getting Set-Up
Aligning Your EYE MINI
Applying Club Stickers
Safety Notice
Appendix
Data
External Links
EYE MINI USER MANUAL 3
TABLE OF CONTENTS
4
5
6
11
14
20
22
24
27
27
30
Table of Contents

EYE MINI USER MANUAL 4
EYE MINI
Rubber Stopper
Club Stickers
Power Cable Ethernet Cable Tweezers
Carrying Case with
Shoulder Strap
WHAT’S INCLUDED
Alignment Rod
What’s Included

EYE MINI USER MANUAL 5
License Registration
The EYE MINI requires periodic connection via internet
to validate the license. If the EYE MINI is disconnected
from the internet for a period of longer than 90 days, all
connection will be prohibited until device is connected
to internet and license is validated.
To determine when your license will expire. Please go to
MENU then LICENSE. You can check both the expiration
date and the validation remaining days.
License Registration

EYE MINI Overview
EYE MINI USER MANUAL 6
Specifications
15.75”
12”
8”
Ready Zone
S
c
r
e
e
n
Page 6 Diagram - v1 - EYE-MINI Manual Diagrams
Data Points
11
Hitting Zone Dimensions
12” W x 8” L
Battery Life
5-6 hours
Placement
Portable
Space Requirements
10’ L x 13’ W x 10’ H
Marked Balls
No
Compatible Accessories
Club stickers, Swing Optix, Balance Optix
Dimensions
6.5” L x 6.6” W x 15.75”
H
Weight
7lbs 15oz

EYE MINI Overview
EYE MINI USER MANUAL 7
Front
E-Ink Screen
Displays
calibration,
options, and
shot data
Power Button
Turns the
Device On/Off
Two High-
Speed
Cameras
& Infrared
Sensors

EYE MINI Overview
EYE MINI USER MANUAL 8
Rear
Ethernet Port
Utilized to connect
to network via
ethernet cable or
connect to PC
Handle
Power Port
USB-C Port
**For Uneekor use only

EYE MINI Overview
EYE MINI USER MANUAL 9
E-Ink Display
Backlight Button
OK Button
Increases
brightness for
better viewing
Used to
select
options
Used to navigate
between settings
and shot data
Power Button
Back Button
Hold to turn
device On/Off
*Tap to wake up
from sleep mode
Return to
previous screen
Up/Down Keys

EYE MINI USER MANUAL 10
EYE MINI Overview
There are various ways to use the EYE MINI: (1) PC, (2) iPad, (3) E-Ink Display.
1. PC
For when you are at home and looking to make the most of your indoor golf
simulator bay. Download Uneekor Launcher to manage your account info and
connect to your favorite golf simulation applications.
Download the Uneekor Launcher
2. iPad
For golfers looking to be versatile and take their EYE MINI outdoors while still
seeing all their ball and club data.
Search Uneekor in the App Store and install Uneekor View Air.
*(only available on iPad)
3. E-Ink Display
For golfers looking to hone-in their skills outdoors without bringing additional
hardware into the mix.
Ways to Use

EYE MINI USER MANUAL 11
Begin by pressing the power button to turn on the EYE MINI.
After powering on the EYE MINI, it will take you to the “Searching…” screen. This is the screen you
will see when the sensor is looking for a golf ball in the hitting zone when you are ready to hit.
The bottom of the screen contains DATA, PUTTING, ALIGN, and MENU.
All settings can be navigated using the up/ down keys and selected using the OK button. Settings
will auto save after exiting the screen.
This is where the ball and club data* will be displayed.
*Club Stickers Needed to receive club data
Display of data can be changed to one or two pages
in settings. Two-page data rotation can be changed
to manual or automatic every 2 or 5 seconds. Under
settings you can change what data is displayed on
the EYE MINI screen. Default setting is to display Ball/
Club Data.
Data that is displayed can be changed to Distance/
Direction to view data oriented to the distance and
direction of the ball ight.
Please note: when using Distance/Direction display,
data will be displayed on seperate pages. Select
the DIST or DIR button on the bottom left to change
between the two.
DATA
POWER ON
Get Familiar

EYE MINI USER MANUAL 12
The putting tab is to be selected when putting. When putting mode is turned on you’ll see a dark “P”
at the top left of the display next to the “RH”.
PUTTING
Calibrating/ aligning your EYE MINI to
the target is done here and can also
be completed by going to MENU then
Target Alignment. Select “Align” at the
bottom of the display, then start. Align
two balls 10”- 20” apart pointed at your
target (*Ensure that target is within
10 degrees of where the EYE MINI is
aimed). Make sure there is a check mark
above the two balls on the EYE MINI
display, then click “APPLY.”
Please ensure EYE MINI is aligned parallel to
your target line. Additiional alignment details
using the EYE MINI alignment rod available on
page 24.
On page 1 under the settings option you can
change between left- and right-handed golfers.
Switch the distance measurement from yards
to meters. Change the speed metrics from
mph, m/s, km/h, yd/s. Display mode from one
page, distance/ Direction, Ball/ Club. Display
rotation can be changed from Manual, or auto
rotation every 2 or 5 seconds. The barometer
can changed from automatic to a certain preset
elevations.
On page 2, you can turn putting mode on
or off. Change the elevation from automatic
conguration to a preset elevation depending
on your geographic location. Auto sleep, auto
shutdown, and auto upgrade can all be turned
off here.
On page 3, you can toggle the ethernet type
between Dynamic or Static depending on your
conguration at home. This is where the WIFI is
congured on/off.
ALIGN MENU
Target Alignment (pg 24)
Settings
Get Familiar
Page 12 Diagram - EYE-MINI Manual Diagrams

EYE MINI USER MANUAL 13
Get Familiar
Device: you will nd your EYE MINI Serial
Number, Region, Wi-Fi SSID, and Wi-Fi
Password.
License section: you can see your account
email, region, level, license expiration date,
and how many days are left on the current
license.
Notice: you’ll nd the EYE MINI safety
warning.
Device: gives you the product and brand
name.
Gives you the status of the Battery
life, WiFi, WiFi IP Address, Ethernet,
Ethernet IP Address.
Status
Current software version and new
updates can be found here.
Updates
*Be careful to not power off device during updates
Go here to nd contact information for
Uneekor Support Team.
Help
About

Getting Set-Up
For the initial set up, you MUST register your
EYE MINI using the Uneekor Launcher with
your PC prior to using an iPad.
You can do this by connecting to your PC or
by connecting directly to your router.
Please see the next steps to complete this
process.
Ethernet- Direct to PC
To connect your EYE MINI with PC, connect the ethernet cable from the PC to the back of the EYE
MINI. Ensure the Ethernet option under settings on the EYE MINI is set to “STATIC” and WiFi is
set to “Station.” Once ethernet is connected to EYE MINI and PC, you will see your launch monitor
under the DEVICES tab in the Uneekor Launcher.
When connecting using this method, in the Uneekor Launcher under devices, make sure ethernet is
selected, then click “connect”.
*EYE MINI is connected to the internet through WiFi for system update and license check
*PC and EYE MINI are connected directly for data communication
EYE MINI USER MANUAL 14
Page 14 Diagram 2 - EYE-MINI Manual Diagrams
EYE MINI
Static IP
PC
Static IP
172.16.1.100
Internet
Page 14 Diagram 1 - EYE-MINI Manual Diagrams
*Not sure about this computer graphic...
we could buy a stock image or I can
make one if we want to replace it
Internet Connection
**IMPORTANT**

Getting Set-Up
Ethernet- Router/ Switch
It is possible to connect your EYE MINI to the internet by connecting the
ethernet cable directly into your router or network switch. To connect the EYE
MINI this way, please connect the ethernet cable provided from the back of
the EYE MINI to the LAN port on your router or network switch. Under settings
change ethernet type to “Dynamic”.
*PC and EYE MINI are connected through the ethernet switch.
EYE MINI USER MANUAL 15
Page 15 Diagram - EYE-MINI Manual Diagrams
Internet
EYE MINI
Dynamic (DHCP)
PC
Dynamic (DHCP)
Internet Connection

EYE MINI USER MANUAL 16
Getting Set-Up
1. Download Uneekor Launcher to your PC. The Launcher can be found under the
resources section of Uneekor.com or click on the link below to download.
Uneekor Launcher.exe
2. Once the launcher is installed, create or login to your My.Uneekor account.
My.Uneekor
For any assistance using the Uneekor Launcher, please reference the guide below.
Installation Guide
3. Open the Uneekor Launcher on your PC and go to the “Install” tab on the
left-hand side and select EYE MINI, then continue.
Follow the step-by-step instructions on the Launcher Window to set up your
EYE MINI. During this installation process your EYE MINI will be registered to your
account. See the next page for more information on connecting your EYE MINI to
the internet.
Getting Set-Up
PC Software Installation

Getting Set-Up
EYE MINI USER MANUAL 17
Per the above photo. Step 1 will have you select the connection method you have set up.
Option 1: Dynamic Etherenet Connection Mode (Recommended method for setup)
This option is to be selected when connecting you EYE MINI into your router or network
switch. When connected to the router or network switch, make sure our EYE MINI ethernet
setting is set to “Dynamic.” If not set to “Dynamic,” the Launcher will not be able to nd
and connect to your EYE MINI.
Option 2: Static Ethernet Connection Mode
This option is to be selected when connecting your EYE MINI directly to the PC. Ensure
you have the ethernet setting on the EYE MINI set to “Static” and the WiFi setting set to
“Station (Client).” If not set to the proper Ethernet and WiFi setting, then the launcher will
not be able to nd your EYE MINI.
After selecting your connection mode, please click “Continue” on the bottom.
Step 1
PC Software InstallationPC Software Installation

Getting Set-Up
EYE MINI USER MANUAL 18
PC Software Installation
Step 2
Click “Select” on your EYE MINI device. If
you do not see your EYE MINI on the list,
please check the internet is connected
properly and you have selected the
correct internet connection method
during Step 1.
Step 3
Select your applicable licenses individually
by selecting the box on the left column. As
well you can manually enter license codes
using the bar on top. Lastly, you can select
all your keys with one click using the “Select
license keys for current device” button.
Ensure you press “Activate” on the bottom
of the page before continuing to the next
step.

Getting Set-Up
EYE MINI USER MANUAL 19
PC Software Installation
Step 4
Step 4 will ask you to take a test shot.
Select the applicable club you are
hitting and place a ball in the hitting
zone.
After you hit a shot, the Club Optix
footage will display the impact photo
and show the ball speed. If this
appears and press “Continue” to go to
the last step.
If you would like to hid another shot,
click the “Retry” button at the bottom
of the page.
You are now done with the installation process. Please navigate to the “Start” tab to
install your View software, third party connector, and Rene/Rene+ if purchased.
For any third party software please follow their install instructions. For any help with
third party software installation, please contact the according companies support
team.
E6: https://e6golf.com/support/
GSPro: https://gsprogolf.com/ or [e-mail]
TGC 2019: https://csc.protee-united.com/hc/en-us