UNIHOMS T8E Operational manual

User Manual
Product
8 inch
Control Panel
8”Smart Multi-functional Knob Panel(in-wall)

Chapter 1 Product presentations........................................................3
1.1 Appearance.................................................................................3
1.2 Main Features.............................................................................3
Chapter 2 Product Specifications....................................................... 4
RK3326S Quad core Cortex-A35............................................4-5
Chapter 3 Ports and Specifications....................................................5
3.1 Interface and ports.............................................................. 5-6
3.2 Specifications............................................................................. 7
Chapter 4 Installation instructions.....................................................8
4.1 Installation drawings ........................................................... 8-9
4.2 Wires connection drawing.................................................. 10
Chapter 5 Operation guideline.........................................................11 5.1
Safety Notes*****....................................................................12
5.2 Operation guideline........................................................11-19
TABLE OF
CONTENTS

Chapter 1 Product presentation
1.1 Appearance
1.2 Main Features
● With optional Asian | EU | US back base, one design for
global users, simple inwall installations.
● 8-inch HD LCD, IPS, multi touch screen, double microphones
with noise reduction, built in 2 x 1W speakers,
light sensor, temperature and humidity sensor.
● ZigBee gateway function, APP remote control.
● Control the lights, curtains, air conditioners, and all other
Smart Home devices. Configure smart home scenes in the
APP, turn on the scene mode with one touch on the screen.

Chapter 2 Product Specifications

Chapter 3 Ports and Specifications
3.1 Interface and ports

Option 1 - US Back Base
Option 3 - Asian Back Base
Option 2 - EU | UK | UAE Back Base

3.2 Specifications

Chapter 4 Installation instructions
● Turn off the main power in the electricity box and confirm
the live wire is
not alive with a test pencil.
● Check the wires and make sure the wires are in good
contact with the terminals and no exposed copper wires.
● Seperate the back base from panel by built-in magnetic
force (as shown in the pictures following).
● Connect the live wire to terminal L and neutral wire to
terminal N.
● Fasten the base to the wall box with mounting screws and
fix the smart panel back to the base by built-in magnetic
force.
● Note that the screws should not be fixed too tight during
installation in case any deformation or damage to the screen
and hardware.
● If your smart panel is not flat after installation, do not press
the screen violently, please check the wall box and the base
installation at first.

4.1 Installation drawings
(Taken EU wall boxes installation as an example.)

Note: Make sure the circuit power were cut off before wire
connections!
Circuit breaker used as disconnected device shall be
incorporated in the electrical installation of the building.
Depth of the wall box should be more than 50mm.
4.2 Wires connection drawing

Chapter 5 Operation guideline
5.1 Safety Notes*****
● This product must be installed by professional
electricians.
not alive with a test pencil, and this product should be kept
away from fire and water during installation and use.
● Turn off the main power in the electricity box and confirm
the live wire is
This product can not be used in moisture circumstances
such as bathroom.
5.2 Operation guideline
*This operation guideline is based on Unihoms ZigBee,
Unihoms App,Unihoms cloud platform and Smatek T8E
firmware. If
any other platforms or firmware, please follow their
operation guidelines.
(1)The product will be turned on once you connect it to
the power supply. The product will get to the network
settings

when you start it in the first time. You can also get into the
network settings from the select menu by swiping down from
the top of the LCD screen.
(2)There is a wireless wifi connection in the network settings.

(3) Start the Unihoms App in your smart phone, select the “ ”
at top right corner in the App home page, and then select the
“ ”at top right corner in the App page.
You can select it. There will be a QR code showing on the
screen after the network connection is done.

(4) Scan the QR code on the screen of the product to add it into
the Unihoms App. You will find a panel icon in your App.
(5) Enter the panel interface in the Unihoms App, you will see
the
gate way and switch icons like and .Click the switch icon to
control 2 local switches (load of each switch for lamps should
be no more than 200W.). It means the switch is off when the
icon is in grey, and the switch is on when it is in orange.

Long press switch 1 or switch 2 to change the name of the switch.
(6) Click the gateway icon to add ZigBee sub devices.
Make sure the ZigBee sub devices are in the set-up mode. The
gateway will search and add the sub devices automatically. You
can follow the user manual of the sub devices to make sure it is in
set-up mode. (Usually it is long press the power button or the
reset button in 5s, then the LED indication light flickering which
means it is in the set-up mode.)
You will see the following pictures in the Unihoms App when you
are adding sub devices to the gateway. Make sure the sub
devices are in the set-up mode and the LED indication light is
flickering.

(7) Click the Done button on the App after you add the sub
device successfully. For example (3 Gang Switch) as the
following.
(8) You could change the name of the sub devices after they
are added to the gateway successfully.

Swipe down - sync to have devices and scenes sync to panel.
(9) You could change the device type by getting into the
device interface in the App. It means the switch is off when it
is in grey, and the switch is on when it is in green. You could
also set up timers(Schedule) for the switches to realize the
automation control.

Swipe down and click sync to have your devices and scenes
sync to panel, now one tap on panel, whole home automation.
(10) Tocreatescenes,enterUnihomssmartApp-Scene- Tap-to-
Run (not Automation) - create scenes - Launch
Tap-to-Run-Then -Runthedeviceandconfiguredifferent
devices work at the same time as a scene. And you can
rename your scenes.

If there is any questions when you add some other sub
devices, please contact us for support.
Swipe down - Key Settings to define the right 2 touch scene
switches + knob controller by your specific devices or
scenes on your App.