Union SP-481SB User manual

PRODUCT DESCRIPTION
Product Description and Application
A bicycle pedal with a durable Polypropylene body, specially designed to use on kid’s bikes.
FEATURES
• The pedal is equipped with a slide bearing system
• The pedals are fitted with integrated and approved retro-reflectors on two sides
TECHNICAL INFORMATION
Pedal type
A “1 Component Pedal” made from black Polypropylene
Bearing
• Adjustable slide bearing system
Axle
• Boron-steel, heat treated to 75HRA (+/-3) case hardness
• With 9/16” x 20TPI threading
Retro Reflectors
• Integrated in cage
• Approved (BS, JIS, TPP) and according to German StVZO regulations (K367)

Dimensions
98* x 64 x 29 mm (*Length x Width x Height)
* Length = maximum pedal length while mounted (protruding out of the crank)
Weight
294 g/pair
Standards
The pedal passed the TÜV test and is certificated to meet the EN standard
EN-14765 “Bicycles for young children - Safety requirements and test methods”
INSTALLATION
Installation & Maintenance
• For assembly and disassembly of your pedal please check the pedal assembly instructions
• Check your pedal conditions before every ride
• Change your pedals when the tread areas wear out
OPTIONS
• This pedal is available with a 1/2” x 20TPI threading. Check SP-481SB –1/2” for more information.
• A “2 Component Kid’s Pedal” with a Polypropylene body, TPE “non-slip” tread areas and 3 retro
reflectors is available. Check SP-833 for more information.