Universal Electronics Millennium 4 User manual

MILLENNIUM™4
Universal Remote Control
User’s Guide

TABLE OF CONTENTS
Introduction..................................3
Features And Functions ....................4
KeyCharts ......................................5
Installing Batteries...........................7
Programming TV Control...................8
SetupCodesforTVs.............................8
Programming VCR/DVD Control ........ 12
Setup Codes for VCRs and DVD's . . . . . . . . . . . . . . 18
Programming COMBO . . . . . . . . . . . . . . . . 27
Setup Codes for combo devices. . . . . . . . . . . . . . . 28
Programming Cable Converter Control30
To Unlock the Cable Key. . . . . . . . . . . . . . . . . . . . . . . 30
To Program the Cable Key. . . . . . . . . . . . . . . . . . . . . 30
To Lock the Cable Key . . . . . . . . . . . . . . . . . . . . . . . . . 31
Setup Codes for Cable Converters. . . . . . . . . . . . . 31
Programming Channel Control Lock. . . 33
To Activate Channel Control Lock . . . . . . . . . . . . . 33
To De-Activate Channel Control Lock. . . . . . . . . . 33
Programming Audio Control ............34
Setup Codes for Stereo Amplifiers. . . . . . . . . . . . . 35
Setup Codes for Stereo Amplifiers. . . . . . . . . . . . . 35
Setup Codes for Audio Accessories. . . . . . . . . . . . 36
Searching For Your Code .................38
Checking The Codes ......................39
Re-Assigning Device Keys ...............40
Changing Volume Lock ..................41
To Change Volume Lock to the CABLE Mode . . 41
To Change Volume Lock to the TV Mode . . . . . . 41
To Change Volume Lock to the VCR Mode. . . . . 41
To Change Volume Lock to the AUDIO Mode. . 41
Troubleshooting .......................... 43
Additional Information ................... 44
2

INTRODUCTION
The Universal Electronics Millennium™ 4 is our
latest generation universal remote control. It is
designed with sophisticated technology that will
allow you to finally consolidate the clutter of all of
the original remote controls in your home enter-
tainment system. It’s packed with easy-to-use fea-
tures such as:
• Preprogrammed to operate the cable converter
supplied by your cable system provider
• Preprogrammed technology for easy setup
• Convenient hide-away sliding door to conceal
less-used functions
• Color-coded keys to quickly locate popular
functions
• Cable ID Lock to lock your remote control for
use only with the cable converter
• Channel Lock to lock channel selection only to
the cable converter
• Code library for video and audio components
• Code Search to help program control of older or
discontinued components
Before you can use your new remote control, you
will need to program it to operate the specific
home entertainment components you wish to
control. Follow the instructions detailed in this
manual to set up your Millennium 4 and enjoy
your new remote control.
3

FEATURES AND FUNCTIONS
Use the illustration below to locate Millennium 4
features and then study the Key Charts (on the next
two pages) to learn how they function.
4

Key Charts
The LED (red light) blinks to
confirm programming and
operation.
Press AUDIO, VCR, TV, or CBL once
to select a home entertainment
component to control.
Press POWER once to turn on or
off the selected home entertain
ment component.
Use SETUP for all programming
sequences.
Use the keypad (0~ 9) to directly
select channels (e.g., 09 or 31).
Press MUTE once to turn sound off
or on.
Press ENTER once after entering
channel numbers on some TV
models.
Use volume +(or volume - ) to raise
(or lower) the sound volume.
Use CH + (or CH - ) to select the next
higher (or lower) channel.
Press LAST once to recall the last
channel and to page back one
screen in the main menu.
Use FAV to cycle through your
favorite channels that are stored in
your cable converter.
Use GUIDE to display the program
guide.
Press PPV/LOCK once to displaythe
pay-per view menu or to lock out a
specific channel on your cable con-
verter.
continued on next page...
5

Key Charts (continued)
Use EXIT to exit out of your cable
converter’s menu and guide.
Use cursor keys to move the cur
sor in the program guide and
menu screens.
Use SELECT/OK to choose options,
PPV events, and to tune programs
from the program guide.
Use INFO to display current chan
nel and program information.
Press MENU once to display your
cable converter’s screen menu.
Use PAGE (or PAGE ) to page up
or down) through menu screens
and the program guide.
Slide the door open to reveal less-
often used keys such as VCR trans
port buttons and cable converter
features.
In the VCR and TV modes, use the
REW, PLAY, FF, REC, STOP, and
PAUSE keys to control your VCR.
To record a program, press REC
twice.
Reserved for cable converter fea
tures (see your cable converter
manual).
Press TV/VCR once to switch the
VCR to view TV channels or tape.
This key will also control the input
select feature on most TVs.
6

INSTALLING BATTERIES
1. On the back of the Millennium 4, push
the tab and lift off the battery cover.
2. Obtain two (2) fully-charged AA alkaline
batteries. Match the + and – marks on
the batteries to the + and – marks in the
battery case, then insert the new batteries.
3. Press the battery cover back into place.
The tab should click when the cover is
locked.
4. Test the unit by pressing POWER and any
mode key (e.g. AUDIO, VCR, TV, or CBL).
If the batteries are inserted correctly, the
LED will blink once.
NOTE: Whenever batteries need replacement, the
Millennium 4 will blink twice with every key press. Simply
7
2
1
3

PROGRAMMING TV CONTROL
Locate the brand name of your TV in the Setup
Codes For TVs section below, and write it in the
following space.
TV Brand:_________________________________
The brands are listed in alphabetical order with the
most popular codes listed first. You will use one of
these codes to program the Millennium 4 to oper-
ate your TV:
1. Turn on the TV.
2. On the Millennium 4, press TV once.
Press andhold SETUP until the LED
blinks twice, then release SETUP.
3. Enter the first four-digit code for your
TV. If you perform this procedure cor-
rectly, the LED will blink twice.
NOTE: If the LED did not blink twice after
entering the code’s last digit, then repeat steps 2
through 3 and try entering the same code again.
4. Aim the Millennium 4 at your TV and
press POWER once. The TV should turn
off. If it does not respond, repeat steps
2-3, trying each code for your brand until
you find one that works. If it still does
not work, try searching for the code (see
Searching For Your Code on page 38).
5. Write your TV code in the boxes below
for future reference.
NOTE: Remember, to use the Millennium 4 to operate
your TV, press TV first.
Setup Codes for TVs:
A-Mark 0003
Abex 0032
Admiral 0093, 0463
Advent 0761, 0783, 0815, 0817, 0842, 1933
Adventura 0046
Aiko 0092 continued on next page...
8

Setup Codes for TVs (continued):
Aiwa 0701
Akai 0812, 0702, 0030, 0098, 0672, 1903, 1935
Alaron 0179, 0183, 0216
Albatron 0700, 0843
Ambassador 0177
America Action 0180
Ampro 0751
Anam 0180, 0004, 0009, 0068
Anam National 0055, 0161
AOC 0030, 0003, 0019, 0052, 0137, 0185
Apex Digital 0748, 0879, 0765, 0767, 1943, 0156
Archer 0003
Audiovox 0451, 0180, 0092, 0003, 0623, 0802, 0875, 1284,
1937, 1951, 1952
Aventura 0171
Axion 1937
Belcor 0019
Bell & Howell 0154, 0016
BenQ 1032, 1315
Boxlight 0893
Bradford 0180
Brockwood 0019
Broksonic 0236, 0463, 0003, 1935, 1938, 0180
Cadia 1283
Candle 0030, 0046, 0056, 0186
Carnivale 0030
Carver 0054, 0170
CCE 0217, 0329
Celebrity 0000
Celera 0765
Champion 1362
Changhong 0765
Cinego 1986
Citizen 0060, 0030, 0092, 0039, 0046, 0056, 0186, 0280
Clairtone 0185
Clarion 0180
Concerto 0056
Contec 0180, 0157, 0158, 0185
Craig 0180, 0161
Crosley 0054
Crown 0180, 0039
Curtis Mathes 0047, 0054, 0154, 0451, 0093, 0060, 0702, 0030,
0145, 0166, 1347, 1147, 0747, 0466, 0056, 0039,
0016
CXC 0180
Daewoo 0451, 0092, 1661, 0019, 0039, 0066, 0067, 0091,
0623, 0661, 0672
Daytron 0019
Dell 1080, 1178, 1264, 1403, 1454
Denon 0145, 0511
Denstar 0628 continued on next page...
9

Setup Codes for TVs (continued):
Diamond Vision 1996, 1997
DMTech 1338
Dream Vision 1297
Dumont 0017, 0019
Durabrand 0463, 0180, 0178, 0171, 1034, 0003
Dwin 0093, 0720, 0747, 0774
Dynatech 0049
Electroband 0000, 0185
Electrograph 1755
Electrohome 0381, 0389, 0409
Emerson 0154, 0236, 0463, 0180, 0178, 0171, 1963, 1944,
0623, 0282, 0280, 0270, 0185, 0183, 0182, 0181,
0179, 0177, 0158, 0039, 0038, 0019, 0180
Envision 0030, 0813, 1365
Epson 0833, 0840, 1290
ESA 0812, 0171
Fisher 0154, 0159
Fujitsu 0179, 0186, 0683, 0809,0853
Funai 0180, 0171, 0179
Futuretech 0180
Gateway 1755, 1756
GE 1447, 0047, 0051, 0451, 0178, 1347, 0747, 0282,
0279, 0251, 0174, 0138, 0135, 0055, 0029, 0027,
0021
Gibralter 0017, 0030, 0019
Go Video 0886
GoldStar 0178, 0030, 0001, 0002, 0019, 0032, 0106, 0409
Goodmans 0360
Gradiente 0392
Grundig 0683
Grunpy 0180, 0179
Haier 1034, 0768
Hallmark 0178
Hannspree 1348, 1351, 1352
Hantarex 1338
Harley Davidson 0043, 0179
Harman/Kardon 0054, 0078
Harvard 0180, 0068
Havermy 0093
Helios 0865
Hello Kitty 0451
Hisense 0748
Hitachi 1145, 0145, 0016, 0032, 0038, 0056, 0095, 0097,
0151, 0173, 0227, 0279, 0409, 0413, 1960
HP 1088, 1089, 1101, 1494, 1502
Hyundai 0849
iLo 1286, 1990
Infinity 0054
Initial 1990
Inteq 0017
10