Universal Furniture 596-850 User manual

INSTRUCTION SHEET
596/599-850
The Debonaire Etagere
Thank you for purchasing this quality product. Be sure to check all packing material carefully for small
parts that may have come loose inside the carton during shipment.
Caution: (1) These parts are cumbersome and heavy. This product can best be assembled with the
assistance of one or more persons in order to prevent personal injury and to insure parts are not damaged
during the assembly process. If dirty, clean finished parts with mild dishwashing liquid and water solution
applied on damp cloth. Cloth should not be excessively wet. Polish finish with soft cloth and an industry
recognized furniture polish.
(2) To prevent damage to your floor or carpet, please check the bottom of each piece of furniture for
stain residue and rough surfaces and also check for staples or nails left after removing the packaging material.
The manufacturer will not be held responsible if preventative steps are not taken prior to installation.
(3) Unpack and dispose of all packing material but be careful not to throw away any assembly parts or
hardware. Read the instruction sheet and parts list carefully. Remove all staples and screws used for
packaging carefully using pliers and or screwdrivers to prevent injury and scratching or damaging flooring.
(4) During normal use everyday, screws, bolts, nuts and wooden plugs may loosen up. They should be
periodically inspected and re-tightened to prevent damage to the furniture and (or) personal property or cause
injury. Always check to be sure all hardware on this list and the above mentioned components is attached to
the furniture properly and kept tightened at all times.
PARTS LIST:
#
Description
Qty.
#
Description
Qty.
A
Top
1pc
B
Glass
3cpcs
C
Post
8pcs
D
Shelf frame
3pcs
E
Right back panel
1pc
F
Left back panel
1pc
G
Bottom panel
1pc
H
Foot
4pcs
I
Hardware pack
1bag
Assembly Procedure: (Please follow the sketches below.)
Step 1: Unpack, inspect, and read assembly instruction carefully. Lay out the parts and hardware.
Make sure the quantity of each is correct.
Step 2: Take the glasses (B) out from the top (A) by using screwdriver (not provided). Keep the
screws for step 5.
Step 3: Attach the posts (C) and shelf frame (D) to the top (A) as below shown.
Step 4: Insert wood dowels (2) into the predrilled holes of top (A) and shelf frame (D), then assemble
the back panels (E & F) to the top (A), shelf frame (D) and bottom panel (G) with allen head
bolt (1) using wrench (4). And lock the back panels (E & F) with mending plate (5), screws (3)
using screwdriver (not provided). Then screw the feet to the bottom panel (G).
Step 5: Attach the top panel to the top (A) with screws from step 2. Turn the etagere upright.
Assembly is now complete.
Q'TY
HARDWARE LIST(I)

INSTRUCTION SHEET
596/599-850
The Debonaire Etagere
GLASS BAG
Step 2
AB
C
C
C
C
D
D
D
Step 3
E
F

INSTRUCTION SHEET
596/599-850
The Debonaire Etagere
Step 4
G
H
Step 5