Unoisetion VS-949C User manual

1
VS-949C 5 In 1 Slimming Machine
Manual
Functions Include:
1- laser lipolisis
2- Multi-polar RF (Tripolar, Five Polar, Seven Polar)
3-Vacuum
4-40K Cavitation
5-Ultrasonic

2
Warning
Thanks for using our company's products, in order to fully make
use of the products, we sincerely suggests follow:
◆◆Please read the instruction in detail and keep it well for further
reading and consulting.
◆◆Please follow the instruction to fit and operate the machine.
◆◆Please do not remove and change any accessories of the
machine.
◆◆It forbids others to open and remove the mainframe except the
authorized people in the company.

3
◆◆It forbids others to change and maintain the machine except
the professional people.
◆◆Please contact us if there is any trouble during operation.

4
Working principal
SKETCH of the CONTROLPANEL
Click on the picture of the corresponding the handle enter the operation interface
Instrument Function and Treatment Principles
1. Vacuum Bipolar RF handle
Dissolve fat, lymphatic drainage, firm skin and enhance skin elasticity
Body-shaping Equipment adopts the most advanced high-speed turbine negative
pressure technology, and innovative three-dimensional conversion
technology,combining with microcomputer chip controlled patent roller
axis,and has an anti-geocentric attract effect on the skin.
Attracting and outspreading the fibrillar connective tissue of different cortexes , through the
rhythmic massage and effectively break down subcutaneous fat and reduce cellular tissue
accumulation of fat , use of the patents to massage deeply roller different parts of thebody ,bring
up fat layer in dermis, curium and subcutaneous ,and release micro-vascular lymphatic vessels at
the same time, promoting metabolism and to make fat cells in a passive movement to fat acids,
even within the cells of toxins, also to be eliminated from lymphatic system in vitro, the
detoxitication enhance the fuction of as many as four times. Can be done manually or any other
instruments can not achieve the perfect results. At the same time, skin is more elastic and
luster.It is the "healthy body sculpture management" expert
Bipolar RF handle mainly used for the body, limbs, buttocks and other parts of concentrated fat,
chieve slimming firming effect. Turned negative and the function of detoxification massage.

5
2. Five polar RF handle
Being integrated with the most advanced RF technology and radio
frequency, the instrument may directly reach the deep-seated fat body and have the excellence of
targeted positioning RF. In the fast-active state, fat cell tissue may generate friction heat,
increase local temperature and remove excess fat and toxin from the body through sweat gland,
enterohepatic circulation and lymph and ultimately achieve the effect of dissolving fat.With
controlled depth technology, inlaid diamond particles of different sizes may rub skin
alongits pattern, adjust suction strength by means of vacuum draw and rub with negative
pressure strongforce to directly explode thick fat. Thus, the effects are very obvious: Enhance
blood circulation, accelerate the decomposition of fat, take away wastes, enhance
the effect of removing cellulite, effectively improve the state of areolar tissue,
remove stubborn fat and improve the sufficient absorption condition of diet
products.
Then RF waves at frequency of 1M HZ is used for exhausting the integrated glycerol and
free fatty acids through hepatoenteral circulation. Finally, vacuum RF and energy electrode are
used for positioning and tightening fat.

6
3. 40Khz Ultrasonic handle
40K Cavitation–40K wave fat system
With collective strong sound wave head, strong sound wave of 40KHZ may
be emitted to vibrate fat cells at top speed and produce numerous vacuum air pockets inside
and outside the fat cells, robustly impact fat cells to generate introverted blast
and disintegrate triglyceride into glycerol and free fatty acids. In physics, it is known as
"cavitation". Micropore introverted blast inside and outside cell may lead to enhanced molecular
motion and a higher energy level and this will finally cause fat cell rupture and thereby achieve
the effects of body building and losing weight.
With collective strong sound wave head, strong sound wave of 40KHZ may
be emitted to human body for impacting fat cells fiercely and causing
friction motion between fat cells. This may cause effective consumption of
calories and moisture in fat cells and reduce the size of fat cells. What's more, sound
wave
vibration Vmay cause fierce impact of fat cells to make them be exploded
instantaneously, reduce the amount of fat cells and thereby achieve the
effects of removing fat.

7
4. SEVEN POLAR RF handle --Facial wrinkle elimination, tightening and lifting
A capacitive coupling electrode is used for transmitting radio-wave energy and generating an
electric field for entering into subcutaneous tissue through the skin surface. In the high-frequency
of 450khz, this electric field changes its polarity for 450,000 times per
second. To reply to the rapid change in electrode, directions of electrical
particles the skin are also changed. By this time, natural electric resistance in
thesubcutaneous tissue moves and generates heat energy. As thepapillary dermis collagen may
immediately shrink when the temperature is within the range from 60 to 70 Celcius degree, after
wrinkle treatment, client may immediately sense the skin tightening effects as it is being
lifted and firmed. When collagen is produced continuously, thickness and
density of the skin papillary dermis may be increased to remove wrinkles, eliminate scars, restore
skin elasticity and gloss and make it be blonde and smooth. While collagen is increased, fresh
skin is generated in the position of operation and wrinkles are removed by
large amount of cells. In addition, when cortex without elasticity or that with thick horny
layer in the area with wrinkles is separated, surrounding skin will also be renewed.

8
5. Tripolar facial handle
Stick to enhance rejuvenation: use of positive and negative
micro-current activation energy release skin cells, so that rapid
synthesis of fibroblasts Collagen, elastic skin revert to the original
compact, the skin causing t the skin to stimulate the muscle tension
is increased, thereby gradually eliminate wrinkles, prevent skin
aging, restoring skin elasticity, facial improvement.
Caution for using RF
1.Beautician should wear insulated gloves during operation.
2.Do not wear any aglet, both for the beautician and the users.
3.The electrode probe must be fully in contact with skin.
4.Do not make the RF electrode stay on any part without moving. Keep it
moving on skin slowly.
5.Skin around eyes and forehead is very thin, the RF output intensity
should be relatively weakened.
6.Do not contact skin with unipolar when using of tripolar,5 polars

9
And 7 polars RF work head otherwise it will produce pulse discharge, gel
paste etc. Products like gel maybe evaporated into a mist.
2. ULTRASONIC:
Ultrasonic utilizes sonic vibrations; it works one million times per second (1 MHz). The
ultrasonic wave could stimulate skin tissue and improve permeability of the membrane to
promoted collagen tissue, reduced wrinkle and invisible appeared fine line, also lift the skin
result for younger and healthy look. Ultrasonic generate frictional heat which accelerate blood
circulation, muscle relaxation, and decompose the cellulite to break down exceed fat.
Ultrasound with 3 probes provided non-surgical lifting. This machine utilizes sonic vibrations to
reduce lines, leaving the skin firm and smooth. Feature Intensity control, 2 sonic variations, and
3 sonic probes.
I. Preparation
(1). Before operating this machine, cleanse the area to be worked. After cleansed, apply
suitable lotion and gel to the skin.
(2). Press Power On/Off to turn the machine.
(3). Set the working time by Time adjust button , working Time display on Time window
(4). Output intensity display on Output intensity window Press Power up and Power down to
set output intensity, output intensity classify into 8 levels. For Facial work, low to mid
intensity is recommemded. For Body work, mid to maximum intensity is recommended.
II. Face Treatment
(1). Connect Face Electrode into Face/Eye Electrode output
(2). Press Face/Eye mode to select Face mode, Face function will light on.
(3). Press Pulse/Continuing mode to select Pulse or Continuing wave, Pulse/Continuing
wave indicator will light on.

10
(4).The operator hold Face Electrode and working on the face.
III. Eye Treatment
(1). Connect Eye Electrode into Face/Eye Electrode
output , connect handout output .
(2). Press Face/Eye mode to select Eye function, Eye function will light on.
(3). Press Pulse/Continuing mode to select Pulse or Continuing wave, Pulse/Continuing wave
indicator will light on.
(4). The operator hold Eye Electrode and working around the Eye area.
IV. Body Treatment
(1). Connect Body Electrode into Body Electrode output , connect handle output .
(2). Press Body mode to select Body function, Body function will light on.
(3). Press Pulse/Continuing mode to select Pulse or Continuing wace, Pulse/Continuing wave
indicator will light on.
(4).The operator hold Body Electrode and working on th body.
5;Laser Lipolisis;