V-tech Switch & Go Dinos - Akuna the Velociraptor User manual

User’s Manual
91-002813-000 US
© 2013 VTech
Printed in China
AKUNA THE VELOCIRAPTOR
TM
AKUNA THE VELOCIRAPTOR

Hi Friend,
You’re about to embark on a “dino-mite” adventure with
me, Akuna the Velociraptor™! Just so you know, I’ve been
specially created just for you and am part of the VTech®
Switch & Go Dinos®crew! Switch & Go Dinos®are a special
breed of dinosaurs that transform from vehicle to dino in
a few easy steps. You’re going to love playing with me!
Not only can you help me do some wicked transformations,
but you can help me do other cool things, too! Try pushing
me on the ground or pressing a button and you’ll hear me
make awesome sounds! Press another button to hear me
talk, and I’ll tell you all about my wild life as a dinosaur!
Maybe you’ll even learn a thing or two.
For more fun, be sure to check out the rest of the Switch
& Go Dinos®crew (each sold separately)! And remember,
with me you’re in for some dino switchin’, road racing fun!
Your pal,
Akuna the Velociraptor™

2
INTRODUCTION
Hiii-yaaa! I am Akuna the VelociraptorTM, and my ninja fighting
skills will amaze you! I use my lightning fast speed to outrun my
prey. And when I catch them, watch out! I have a long, curved claw
on each foot that can end a fight with one strike.
But I’ve saved my most impressive skill for last. I can change shape
and transform into a motorcycle! Now watch me disappear! Vroom,
vroom! Sayonara!
Introduction
Sound Button
Light-up
Eyes
Talk Button
On/Off Switch & Volume Control

3
INCLUDED IN THIS PACKAGE
• OneVTech®SWITCH & GO DINOS®:Akuna the VelociraptorTM
• Oneuser’smanual
WARNING:
All packing materials, such as tape, plastic sheets, packaging
locks and tags are not part of this toy, and should be discarded
for your child’s safety.
ATTENTION:
Pour la sécurité de votre enfant, débarrassez-vous de tous
les produits d’emballage tels que rubans adhésifs, feuilles de
plastique, attaches et étiquettes. Ils ne font pas partie du jouet.
NOTE:
Pleasekeeptheuser’smanualasitcontainsimportantinformation.
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the
bottom of the unit.
3. Install 1 new “AA” (LR6/AM-3)
battery following the diagram inside
the battery box. (The use of new,
alkaline batteries is recommended
for maximum performance.)
4. Replacethebatterycovertosecureit.
NOTE:
When the battery runs low, the toy will no longer respond. If this
happens, please replace the battery.
Getting Started

4
Product Features
BATTERY NOTICE
• Usenewalkalinebatteriesformaximumperformance.
• Useonlybatteriesofthesameorequivalenttypeasrecommended.
• Donotmixdifferenttypesofbatteries:alkaline,standard(carbon-
zinc) or rechargeable (Ni-Cd, Ni-MH), or new and used batteries.
• Donotusedamagedbatteries.
• Insertbatterieswiththecorrectpolarity.
• Donotshort-circuitthebatteryterminals.
• Removeexhaustedbatteriesfromthetoy.
• Removebatteriesduringlongperiodsofnon-use.
• Donotdisposeofbatteriesinre.
• Donotchargenon-rechargeablebatteries.
• Removerechargeable batteries fromthe toy beforecharging (if
removable).
• Rechargeablebatteriesareonlyto be charged under adult
supervision.
PRODUCT FEATURES
1.ON/OFF SWITCH & VOLUME CONTROL
This product has a single switch that
turnstheunitONorOFF andcontrolsthe
volume.
To turn the unit ON or adjust the volume,
slide the switch to Low/High.
To turn the unit OFF, slide the switch to
OFF.

5
2. TALK BUTTON
Press the Talk Button to hear the dino
or driver talk.
3. SOUND BUTTON
Press the Sound Button to hear cool
sound effects.
4. AUTOMATIC SHUT-OFF
To preserve battery life, the unit will automatically power-off after
several minutes without input.
Product Features / How to Switch
1.Dinosaurshape.
HOW TO SWITCH THE DINO TO A MOTORCYCLE
2. Rotate the body all the way
back until it meets the tail.

6
How to Switch
3. Move the head forward as
far as it will go. 4. Turn the back wheel 90 degrees.
6. Flip the legs up.
7. Move the tail pipes down. 8. Motorcycle shape.
5. Pull down the kickstands
so that the motorcycle can
stand up.
Note:
To change the motorcycle back into a dino, reverse the order of the
steps above.

7
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat
source.
3. Remove the batteries when the unit is not in use for an extended
period of time.
4.Donotdroptheunitonhardsurfacesanddonotexposetheunitto
moisture or water.
TROUBLESHOOTING
If for some reason the unit stops working or malfunctions, please follow
these steps:
1. Please turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play again.
5. If the product still does not work, replace with a new set of batteries.
Iftheproblempersists,pleasecallourConsumerServicesDepartment
at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, and a
service representative will be happy to help you.
NOTE:
Thisequipment generatesanduses radio frequencyenergy and if
not installed and used properly, that is, in strict accordance with the
manufacturer’s instructions, it may cause interference to radio and
television reception. It has been type tested and found to comply
within the limits for a Class B computing device in accordance with the
specicationsinSub-partJofPart15FCCrules,whicharedesigned
to provide reasonable protection against such interference in a
residentialinstallation.However,thereisnoguaranteethatinterference
Care & Maintenance / Troubleshooting

8
Note
willnotoccurinaparticularinstallation.Ifthisequipmentdoescause
interferencewithradio or televisionreception,whichcanbedetermined
byturningtheequipmentonandoff,theuserisencouragedtotryto
correct the interference by one or more of the following measures:
• Reorientorrelocatethereceivingantenna
• Increasetheseparationbetweentheequipmentandreceiver
• Connecttheequipmentintoanoutletonacircuitdifferentfromthat
to which the receiver is connected
• Consultthedealeroranexperiencedradio/TVtechnicianforhelp
Caution:changesormodicationsnotexpresslyapprovedbytheparty
responsible for compliance could void the user’s authority to operate
theequipment.
THISDEVICE COMPLIES WITH PART15 OF THE FCC
RULES.OPERATIONISSUBJECTTOTHEFOLLOWINGTWO
CONDITIONS:(1)THISDEVICEMAYNOTCAUSEHARMFUL
INTERFERENCE,AND(2)THISDEVICEMUSTACCEPTANY
INTERFERENCERECEIVED,INCLUDINGINTERFERENCE
THATMAYCAUSEUNDESIREDOPERATION.
THISCLASS B DIGITALAPPARATUS COMPLIESWITH
CANADIANICES-003.
CET APPAREIL NUMÉRIQUE DE LA CLASSE B EST
CONFORMEÀLANORMENMB-003DUCANADA.