V-tech SWITCH & GO DINOS Overseer the T-Rex Assembly Instructions

®
Parent’s Guide
91-003773-011 UK
Overseer the T-Rex
521063 IM.indd 1521063 IM.indd 1 03/19/2021 11:54:3403/19/2021 11:54:34

521063 IM.indd 2521063 IM.indd 2 03/19/2021 11:54:3503/19/2021 11:54:35

2
INTRODUCTION
Thank you for purchasing SWITCH & GO DINOS®Overseer the
T-Rex by VTech®.Engage your imagination with this amazing T-Rex
that switches into a mighty robot. Use the Action and Talk buttons to
bring Overseer the T-Rex to life in your very own dinosaur universe.
DIRECTION
BUTTONS
OFF/VOLUME
SWITCH
DIRECTION
BUTTONS
SWITCH
BUTTON
CONNECTION
LIGHT
TALK
BUTTON
ACTION
BUTTON
521063 IM.indd 2521063 IM.indd 2 03/19/2021 11:54:3603/19/2021 11:54:36

3
SWITCH BUTTON
LCD SCREEN
LIGHT UP
HEAD
POWER ON/OFF
SWITCH
521063 IM.indd 3521063 IM.indd 3 03/19/2021 11:54:3703/19/2021 11:54:37

4
INCLUDED IN THIS PACKAGE
• One VTech®SWITCH & GO DINOS®Overseer the T-Rex.
• One Remote Control
• One Parent’s Guide
WARNING: All packing materials such as tape, plastic sheets,
packaging locks, removable tags, cable ties, cords
and packaging screws are not part of this toy and
should be discarded for your child’s safety.
NOTE: Please keep this parent’s guide as it contains
important information.
IMPORTANT NOTE:
1. For optimal performance, please play on a smooth surface.
2. When exposed to electrostatic discharge and radio interference,
Overseer the T-Rex may malfunction. Please turn both Overseer
and the remote control off and on again to reset them.
3. For your child’s safety, do not put Overseer the T-Rex in either
conguration on your clothing, body or hair.
4. For your child’s safety, don’t touch or pick up Overseer the T-Rex
when it is switching.
521063 IM.indd 4521063 IM.indd 4 03/19/2021 11:54:3803/19/2021 11:54:38

5
GETTING STARTED
BATTERY REMOVAL AND INSTALLATION
Overseer the T-Rex
1. Make sure the unit is turned OFF.
2. Locate the battery covers on
the back of each foot and use a
screwdriver to remove them.
3. Remove old batteries by pulling
up on one end of each battery.
4. Install 6 new AA (LR6/AM-3)
batteries following the diagram
inside the battery box. (The
use of new alkaline batteries
is recommended for maximum
performance).
5. Replace the battery covers.
Remote Control
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the back of the
controller and use a screwdriver to remove it.
3. Remove old batteries by pulling up on one
end of each battery.
4. Install 2 new AAA batteries following the
diagram inside the battery box. (The use of
new alkaline batteries is recommended for
maximum performance).
5. Replace the battery cover.
WARNING:
Adult assembly required.
Batteries are to be installed by adult.
Keep batteries out of reach from children.
521063 IM.indd 5521063 IM.indd 5 03/19/2021 11:54:3903/19/2021 11:54:39

6
BATTERY NOTICE
• Insert batteries with the correct polarity (+ and -).
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable batteries.
• Only batteries of the same or equivalent type as recommended
are to be used.
• Do not short-circuit the supply terminals.
• Remove batteries during long periods of non-use.
• Remove exhausted batteries from the toy.
• Dispose of batteries safely. Do not dispose of batteries in re.
RECHARGEABLE BATTERIES:
• Remove rechargeable batteries from the toy before charging.
• Rechargeable batteries are only to be charged under adult supervision.
• Do not charge non-rechargeable batteries.
521063 IM.indd 6521063 IM.indd 6 03/19/2021 11:54:3903/19/2021 11:54:39

7
Disposal of batteries and product
The crossed-out wheelie bin symbols on products and
batteries, or on their respective packaging, indicates they
must not be disposed of in domestic waste as they contain
substances that can be damaging to the environment and
human health.
The chemical symbols Hg, Cd or Pb, where marked,
indicate that the battery contains more than the specied
value of mercury (Hg), cadmium (Cd) or lead (Pb) set out
in the Batteries and Accumulators Regulation.
The solid bar indicates that the product was placed on the
market after 13th August, 2005.
Help protect the environment by disposing of your product
or batteries responsibly.
VTech®cares for the planet.
Care for the environment and give your toy a second life by
disposing of it at a small electricals collection point so all its
materials can be recycled.
In the UK:
Visit www.recyclenow.com to see a list of collection points near you.
In Australia & New Zealand:
Check with you local council for kerbside collections.
521063 IM.indd 7521063 IM.indd 7 03/19/2021 11:54:3903/19/2021 11:54:39

8
PRODUCT FEATURES
OVERSEER THE T-REX:
1. POWER ON/OFF SWITCH
To turn Overseer the T-Rex on, slide
the Power On/Off Switch to the ON
( ) position.
To turn Overseer the T-Rex off, slide
the Power On/Off Switch to the OFF
( ) position.
2. SWITCH BUTTON
Press the Switch Button to switch
between a T-Rex and robot
automatically.
3. LCD SCREEN
The LCD Screen shows T-Rex eye
animations in Dino Mode and shows
robot controller animations in Robot
Mode.
4. LIGHT UP HEAD
The Light Up Head flashes a red light
along with the sounds in Dino Mode.
The Light Up Head flashes a green light
along with the sounds in Robot Mode.
521063 IM.indd 8521063 IM.indd 8 03/19/2021 11:54:4003/19/2021 11:54:40

9
REMOTE CONTROL:
1. OFF/VOLUME SWITCH
To turn the Remote Control on and
adjust the volume, slide the Off/Volume
Switch to the Low Volume ( ) position
or the High Volume ( ) position.
To turn the Remote Control off,slide
the Off/Volume Switch to the OFF
() position.
2. CONNECTION LIGHT
When the Remote Control is switched
on, the Red Connection Light will
turn on. If Overseer the T-Rex is
switched on, the Red Connection
Light will flash and the Remote
Control will start to connect to
Overseer the T-Rex. If the connection is successful, the Red
Connection Light will turn off and a Green Connection Light
will show once buttons on the Remote Control are pressed. If
the connection fails and the Remote Control cannot connect
to Overseer the T-Rex, please turn the Remote Control and
Overseer the T-Rex off and on again to try again.
Note:
If the Connection Light is off when any of the Remote Control
buttons are pressed, please install a brand new set of batteries
and try switching it off and on again.
521063 IM.indd 9521063 IM.indd 9 03/19/2021 11:54:4103/19/2021 11:54:41

1010
3. DIRECTION BUTTONS
Hold the Direction Buttons to move
Overseer the T-Rex forwards,
backwards, left or right.
4. TALK BUTTON
Press the Talk Button to play wild
T-Rex phrases, facts and sound
effects in Dino Mode. Press the Talk
Button to play cool robot phrases and
sound effects in Robot Mode.
5. ACTION BUTTON
Press the Action Button to see
Overseer perform a cool action!
521063 IM.indd 10521063 IM.indd 10 03/19/2021 11:54:4203/19/2021 11:54:42

11
6. SWITCH BUTTON
Press the Switch Button to see
Overseer automatically switch
between T-Rex and robot.
7. AUTOMATIC SHUT-OFF
To preserve battery life, Overseer the T-Rex will automatically
turn off after several minutes without input. The Remote Control
can’t control Overseer the T-Rex during this period. Overseer
the T-Rex can be turned on again by pressing the Switch Button,
or by sliding the Power On/Off Switch from the Off position to the
On position.
Note:
The lights on the T-Rex’s nose will ash red three times and then
automatically turn off when battery power is low. Once this occurs,
please install a brand new set of batteries and try switching
Overseer off and on again.
521063 IM.indd 11521063 IM.indd 11 03/19/2021 11:54:4203/19/2021 11:54:42

12
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct
heat source.
3. Remove the batteries when the unit will not be in use for an
extended period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit
to moisture or water.
TROUBLESHOOTING
If for some reason the program/activity stops working or malfunctions,
please follow these steps:
1. Please turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play with again.
5. If the product still does not work, install a brand new set of batteries.
If the problem persists, please contact our Consumer Services
Department and a service representative will be happy to help you.
521063 IM.indd 12521063 IM.indd 12 03/19/2021 11:54:4203/19/2021 11:54:42

13
DECLARATION OF CONFORMITY
Hereby, VTech Electronics Europe BV declares that the radio equipment
type 5210 is in compliance with Directive 2014/53/EU. The full text of
the EU declaration of conformity is available at the following internet
address: www.vtech.com/re-directive
Manufacturer Name: VTech Electronics Europe BV
Manufacturer address: PO Box 10042, 6000 GA Weert, The Netherlands
Frequency Band: 2413MHz – 2473MHz
Maximum RF power: 0.001 W (0 dBm)
DECLARATION OF CONFORMITY
Hereby, VTech Electronics Europe Plc declares that the radio equipment
type 5210 is in compliance with The Radio Equipment Regulations
2017 (2017 No.1206). The full text of the Declaration of conformity is
available at the following internet address: www.vtech.com/re-directive
Manufacturer Name: VTech Electronics Europe BV
Manufacturer address: PO Box 10042, 6000 GA Weert, The Netherlands
Frequency Band: 2413MHz – 2473MHz
Maximum RF power: 0.001 W (0 dBm)
521063 IM.indd 13521063 IM.indd 13 03/19/2021 11:54:4203/19/2021 11:54:42

14
CONSUMER SERVICES
Creating and developing VTech®products is accompanied by a
responsibility that we at VTech®take very seriously. We make
every effort to ensure the accuracy of the information, which forms
the value of our products. However, errors sometimes can occur.
It is important for you to know that we stand behind our products
and encourage you to call our Consumer Services Department with
any problems and/or suggestions that you might have. A service
representative will be happy to help you.
UK Customers:
Phone: [phone] (from UK) or [phone] (outside UK)
Website: www.vtech.co.uk/support
Australian Customers:
Phone: [phone]
Website: support.vtech.com.au
NZ Customers:
Phone: [phone]
Website: support.vtech.com.au
Product Warranty/
Consumer Guarantees
UK Customers:
Read our complete warranty policy online at vtech.co.uk/warranty.
Australian Customers:
VTECH ELECTRONICS (AUSTRALIA) PTY LIMITED –
CONSUMER GUARANTEES
Under the Australian Consumer Law, a number of consumer guarantees
apply to goods and services supplied by VTech Electronics (Australia)
Pty Limited. Please refer to vtech.com.au/consumerguarantees for
further information.
521063 IM.indd 14521063 IM.indd 14 03/19/2021 11:54:4203/19/2021 11:54:42

TM & © 2019 VTech Holdings Limited.
All rights reserved.
Printed in China.
91-003773-011 UK
Visit our website for more
information about our products,
downloads, resources and more.
www.vtech.co.uk
www.vtech.com.au
521063 IM.indd 15521063 IM.indd 15 03/19/2021 11:54:4203/19/2021 11:54:42