V-tech KidiMagic StarLight! Assembly Instructions

91-003680-011 UK
Parent’s Guide
520403 IM REV.indd 1520403 IM REV.indd 1 2021/8/6 9:29:282021/8/6 9:29:28

C
M
Y
CM
MY
CY
CMY
K
Grow with VTech(105x148)bw1P-V2.pdf 1 08/18/2014 9:35:53
520403 IM REV.indd 2520403 IM REV.indd 2 2021/8/6 9:29:332021/8/6 9:29:33

3
INTRODUCTION
Thank you for purchasing the VTech®KidiMagic StarLight!
KidiMagic StarLight is a wonderful alarm clock with an atmospheric
soft glowing mood light that changes colour! Tune into your favourite
radio station with the FM radio or plug in a battery powered external
music player (not included) to listen to your own music. There are also
relaxing melodies with soft lighting, creating a peaceful atmosphere.
Change the colour of the light and control the games by moving your
palm above the magic sensor! The magic fortune games can read your
mind and predict your fortune. It’s magic!
INCLUDED IN THIS PACKAGE
• 1 VTech®KidiMagic StarLight
• 1 audio cable
• 1 parent’s guide
• 4 AA batteries for demo purposes only
Note: The metallic coating part on KidiMagic StarLight is insulating.
WARNING: All packing materials such as tape, plastic sheets,
packaging locks, removable tags, cable ties, cords and
packaging screws are not part of this toy and should be
discarded for your child’s safety.
NOTE: Please keep this parent’s guide as it contains important
information.
520403 IM REV.indd 3520403 IM REV.indd 3 2021/8/6 9:29:332021/8/6 9:29:33

4
PRODUCT FEATURES
PRODUCT LAYOUT AND BUTTONS
1 2
Projection
Projection Focus Ring
Projection Angle
Adjuster
OK
Direction Button
Projection Lens
AC/DC
Jack Audio-in
Jack
Magic Sensor
Alarm
Volume
Settings
Light
Music
Clock
Games
Magic Fortune
520403 IM REV.indd 4520403 IM REV.indd 4 2021/8/6 9:29:332021/8/6 9:29:33

5
Screen Icons
Indicate the current status of each mode.
Magic Sensor Game Magic Fortune
Music Projection 1Alarm 1
2Alarm 2
Buttons Description
Clock
Press this button to enter Clock mode or to go to sleep mode.
When the clock is not in use, sleep mode will activate to save power.
Music
Press this button to enter Music mode. Here you can listen to relaxing
music and tune FM radio. If a battery powered external music player
(not included) is connected, you can listen to your own music.
Note: For best performance, only connect to battery powered external
music players.
Game
Press this button to enter Game mode.
Magic Fortune
Press this button to choose a magic fortune game.
Alarm
Press this button to set an alarm.
Setting
Press this button for the below settings or to exit to Clock mode.
• Brightness Setting
• Projection Theme Setting
• Projection Orientation Setting
• Light Effect Setting
• Auto-off Timer Setting
520403 IM REV.indd 5520403 IM REV.indd 5 2021/8/6 9:29:332021/8/6 9:29:33

6
• Time Setting
• Date Setting
Light Button
Press this button to switch between star and screen display lights on,
star light off and both lights off.
Time Projection Button
Press this button to turn time projection on or off.
Volume Button
Press this button to adjust the volume.
Direction buttons
Press this button to make a selection.
OK Button
Press this button to conrm your selection.
If in Clock mode, press the OK button to tell the current time.
Audio-in Jack
Plug in a battery powered external music player (not included) using
the supplied audio cable to listen to music.
Note: For best performance, only connect to battery powered external
music players.
AC/DC Jack
Plug in a VTech®6V AC power adaptor (sold separately) here.
Projector Focus Lens
Turn this to adjust the focus of the time projection.
Note:
We recommend using the time projection in a dimly lit room to get the
best results.
Projection Angle Adjuster
Adjust the projection angle by switching the adjuster.
Magic Sensor Ring
Wave your palm above the magic sensors to see magic effects. Works
only when the magic sensor icon is shown on the screen.
520403 IM REV.indd 6520403 IM REV.indd 6 2021/8/6 9:29:332021/8/6 9:29:33

7
WARNING
•Please keep your KidiMagic StarLight away from strong light or
direct sunlight, it will interfere with the magic sensor.
• To avoid poor operation, please ensure there are no obstacles such
as a shelf close to the top of the unit.
• If the sensor detects an obstacle that impedes the performance of
the unit, you will see a warning icon on the screen.
SPECIAL WARNING ICON
Low Battery
This icon will appear when the battery
power is low. Please replace the
batteries.
Bad Signal
The animation will appear when an
object is within the sensor range for an
extended period of time and reduces the
performance.
INSTRUCTIONS
BATTERY REMOVAL AND INSTALLATION
KidiMagic StarLight uses 4 AA batteries or a VTech®6V adaptor
(sold separately).
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the back of the unit. Use a screwdriver
to loosen the screw and then open the battery cover.
3. If used batteries are present, remove these batteries from the unit
by pulling up on one end of each battery.
4. Install 4 new AA (AM-3/LR6) batteries following the diagram inside
the battery box. (For best performance, alkaline batteries or fully
charged Ni-MH rechargeable batteries are recommended).
5. Replace the battery cover and tighten the screw to secure.
WARNING:
Adult assembly required for battery installation.
Keep batteries out of reach of children.
520403 IM REV.indd 7520403 IM REV.indd 7 2021/8/6 9:29:332021/8/6 9:29:33

8
IMPORTANT: BATTERY INFORMATION
• Insert batteries with the correct polarity (+ and -).
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable
batteries.
• Only batteries of the same or equivalent type as recommended are
to be used.
• Do not short-circuit the supply terminals.
• Remove batteries during long periods of non-use.
• Remove exhausted batteries from the toy.
• Dispose of batteries safely. Do not dispose of batteries in re.
RECHARGEABLE BATTERIES:
• Remove rechargeable batteries from the toy before charging.
• Rechargeable batteries are only to be charged under adult
supervision.
• Do not charge non-rechargeable batteries.
Disposal of batteries and product
The crossed-out wheelie bin symbols on products and
batteries, or on their respective packaging, indicates they
must not be disposed of in domestic waste as they contain
substances that can be damaging to the environment and
human health.
520403 IM REV.indd 8520403 IM REV.indd 8 2021/8/6 9:29:342021/8/6 9:29:34

9
The chemical symbols Hg, Cd or Pb, where marked, indicate
that the battery contains more than the specied value of
mercury (Hg), cadmium (Cd) or lead (Pb) set out in the
Batteries and Accumulators Regulation.
The solid bar indicates that the product was placed on the
market after 13th August, 2005.
Help protect the environment by disposing of your product or
batteries responsibly.
VTech®cares for the planet.
Care for the environment and give your toy a second life by disposing
of it at a small electricals collection point so all its materials can be
recycled.
In the UK:
Visit www.recyclenow.com to see a list of collection points near you.
In Australia & New Zealand:
Check with your local council for kerbside collections.
CONNECTING THE ADAPTOR
• Make sure the unit is OFF and ensure no batteries remain inside
the unit.
• Locate the 3.5mm DC Jack on the side of the unit.
• Connect a power adaptor (not included) into the unit’s DC Jack.
• Insert the other end of the power adaptor into a plug socket.
• Turn the unit ON.
TRANSFORMER SAFETY NOTICE
• VTech recommend a power supply (AC/DC adaptor) of the below
specication:
Power rating: 6V/800mA DC output with 3.5mm/1.3mm plug
(positive centre).
• This toy shall only be used with a power supply for toys.
• The power supply is not a toy.
• This toy is not intended for use by children under 3 years old.
• Do not connect the toy to more than the recommended number of
power supplies.
520403 IM REV.indd 9520403 IM REV.indd 9 2021/8/6 9:29:342021/8/6 9:29:34

10
• Never clean a plugged in toy with liquid.
• Please examine the power supply periodically for conditions that
may result in the risk of re, electric shock, or injury to persons
(such as damage to the supply cord, output cord, plug, blades,
housing, or other parts) and that, in the event of such conditions,
the power supply should be scrapped.
• Power supplies for toys are not intended to be used as toys, and the
use of these products by children shall be under the full supervision
of parents.
TO BEGIN USING
KIDIMAGIC STARLIGHT
INITIAL SETUP
Press any button to turn the unit on. When the unit is rst turned on,
you will be asked to set the time and date.
TIME SETUP
Here you can set the time format.
• Press the OK button to highlight the next item:
Hour, Minute, am / pm (only in 12 hour mode),
/ , 12 / 24 hr.
• Press the buttons to adjust the value.
• To save the current settings, press the OK
button when highlighting the tick icon . Or, you can press the
buttons to choose the reset icon to reset the time.
DATE SETUP
Here you can set the date format.
• Press the OK button to highlight the next item:
Day, Month, Year, / , Date Format (DD/
MM/YY or MM/DD/YY).
• Press the buttons to adjust the value.
• To save the current settings, press the OK button when highlighting
the tick icon . Or, you can press the buttons to choose
the reset icon to reset the date.
520403 IM REV.indd 10520403 IM REV.indd 10 2021/8/6 9:29:342021/8/6 9:29:34