Vacmaster BS116 User manual

User’s Guide
BS116

Thank you for purchasing the VACMASTER®BS116 Impulse Bag Sealer. You are
about to advance your operation with one of the most reliable sealers available. The
BS116 is a fully automatic, electromagnetic sealer featuring the latest technology that
allows different types of pouches to be sealed quickly and consistently. This machine
can seal a variety of lms and thicknesses using electronic timing that controls the
temperature-time cycle. The BS116 is designed to meet the high demands of most food
service operations.
This unit has a full 16” seal bar that can be installed and removed quickly. This will
make cleaning and maintenance nearly effortless. Additional features include a 5mm
wide seal, heavy-duty stainless steel construction and a machine with no pre-heating
required. The BS116 offers the benets of a more efcient and consistent operation.
To get started, please read and follow all instructions for usage and maintenance
carefully before operating the VACMASTER®BS116 Impulse Bag Sealer.
Table of Contents

Operating Instructions
Setting up the BS116.........................................................4
Using the BS116 Impulse Bag Sealer ...............................4
Replacing the BS116 Seal Bar .................................. 5
VACMASTER®Pouches ..........................................6
Machine Safety & Maintenance.....................................7
Parts Information ...........................................................8
Warranty ......................................................................11
Table of Contents

Please read all instructions before operating the BS116.
SETTING UP THE BS116
1. Place the machine in the proper work area
Set the BS116 in a suitable work space. The area should be clean and dry.
2. Attach the power cord, and plug the machine into a grounded electrical outlet
Properly insert the electrical cord into the power outlet on the back of the machine, and then
plug the cord into the wall outlet.
3. Turn the power switch on
Turn the power switch on the left side of the machine to the ON position. The power switch
will illuminate when the machine is turned on.
USING THE BS116 IMPULSE BAG SEALER
1. Select a pouch
Select the proper size of pouch for the product that you are packaging. Make sure that the
mouth of the pouch does not exceed the length of the seal bar. Allow 3” of extra headspace at
the top of the pouch to ensure a quality seal. The BS116 accepts pouches up to 16”W.
2. Fill the pouch and place between the seal bar and seal pad
Fill the pouch with the product to be sealed, and lay the opening of the pouch between the seal
bar and the seal pad. Keep pouches that contain liquids or wet product below the height of the
seal bar. Make sure that the pouch lies at across the seal bar and is free of wrinkles.
CAUTION: To prevent risk of injury; keep ngers and objects out of the sealing area.
3. Seal the pouch
To seal the pouch, press and release the red SEAL button on the right side of the machine.
The top arm bar will engage for approximately nine seconds. Once the sealing process is
complete, the top arm bar will release and you may remove the pouch.
4. Inspect the pouch
Inspect the pouch seal. A positive seal will be consistent in width and appear clear upon
inspection. If the seal is awless, the process is complete.
4
Operating Instructions

Operating Instructions
5
REPLACING THE BS116 SEAL BAR
1. Unplug the machine and make sure that the current seal bar is cool to the touch.
2. Lift straight up on the seal bar until it is clear of the contact post and remove the seal
bar from the machine.
3. Wipe the machine’s seal area with a damp cloth and allow the machine to dry completely.
4. Align the new seal bar with the contact posts on the machine and set the bar in place.
The seal bar should rest securely on top of the contact posts.
5. Plug the machine in and without inserting a pouch, press the SEAL button to ensure correct
installation of the new seal bar. If the BS116 is functioning properly, it is now ready for use.

6
For the best results, use our VACMASTER®Pouches with your BS116. The VACMASTER®
Pouches are constructed of a heavy-duty poly/nylon combination. This durable pouch provides
increased puncture and abrasion resistance. These pouches are transparent, offering clearly
visible product for easy identication. The pouches work well in conjunction with the BS116
Impulse Bag Sealer, creating a tight and secure seal every time. The VACMASTER®Pouches
are high quality, large quantity and incredibly affordable!
• Heavy-duty poly/nylon material
• Eliminates freezer burn and dehydration
• Pouches can be frozen, refrigerated, microwaved or boiled
• Economically priced
• Offered in a wide range of sizes and thickness
• BPA free
VACMASTER®Pouches Machine Safety & Maintenance

VACMASTER®Pouches
7
• Read this manual carefully before using your BS116 for the rst time.
• Clean the machine after each use.
• Do not use the BS116 on a wet or hot surface, or near a heat source.
• Do not immerse machine, or power cord in water, or any other liquid.
• Use grounded power sources only. Do not use extension cord.
• Do not operate appliance with a damaged cord.
• Only use the BS116 for its intended use.
• Only use VACMASTER®pouches and accessories.
• Do not allow the accumulation of food or debris to remain on the seal bar
or seal pad.
• Use a warm, damp washcloth to keep the sealing area clean.
• Clean the BS116 with soap and water or stainless steel cleaner.
• Periodically inspect the machine for wear or damage. If any items are damaged
or worn, replace them immediately. Do not use the machine until the item(s) has
been replaced.
• Always unplug the BS116 before cleaning or performing maintenance.
Machine Safety & Maintenance

8
Figure 1
Number Name Quantity Part Number
1 Cabinet 1 976141
2 Seal Decal 1 976251
3 Seal Switch 1 976142
4 Rubber Feet 4 946143
5 Handle 2 976144
6 Fan 1 955053
7 Pedal Switch Plug 1 9 Back Panel 1 976146
10 Power Plug 1 976147
11 Pivot Rod 1 976150
12 E-Clip 2 976151
13 Top Cover 1 976152
14 Quick Start Decal 1
15 Spacer 3 976153
16 Screw 3
17 Arms 2 976154
18 Spring 4 976155
19 Flat Washer 6 976156
20 Robber Washer 4 976157
21 Rod 2 976158
22 E-Clip 4 976159
23 Magnet Plate 1 976161
24 Lock Nut 2 976162
25 Top Bar 1 976163
26 Decal “Finger Pinch Point” 1 978107
27 Hexagon Bolt 2 976164
28 Seal Pad 1 976165
29 Seal Bar Assembly 1 976401
30 Main Switch 1 976167
31 Decal “On/O󰘯” 1976252
32 Seal Bar Post 1 976171
33 Brass Post 2 976168
34 Insulated Washer - Outside 2 976169
35 Insulated Washer - Inside 2 976170 36 Lock Nut 3 976190

9
Figure 1
Number Name Quantity Part Number
1 Cabinet 1 976141
2 Seal Decal 1 976251
3 Seal Switch 1 976142
4 Rubber Feet 4 946143
5 Handle 2 976144
6 Fan 1 955053
7 Pedal Switch Plug 1 9 Back Panel 1 976146
10 Power Plug 1 976147
11 Pivot Rod 1 976150
12 E-Clip 2 976151
13 Top Cover 1 976152
14 Quick Start Decal 1
15 Spacer 3 976153
16 Screw 3
17 Arms 2 976154
18 Spring 4 976155
19 Flat Washer 6 976156
20 Robber Washer 4 976157
21 Rod 2 976158
22 E-Clip 4 976159
23 Magnet Plate 1 976161
24 Lock Nut 2 976162
25 Top Bar 1 976163
26 Decal “Finger Pinch Point” 1 978107
27 Hexagon Bolt 2 976164
28 Seal Pad 1 976165
29 Seal Bar Assembly 1 976401
30 Main Switch 1 976167
31 Decal “On/O󰘯” 1976252
32 Seal Bar Post 1 976171
33 Brass Post 2 976168
34 Insulated Washer - Outside 2 976169
35 Insulated Washer - Inside 2 976170
36 Lock Nut 3 976190
Figure 2
Number Name Quantity Part Number
1 Mounting Board 1 976179
2 Transformer With Wire 1 3Recti󰘰er 1976177
4 Display Decal 1 5 Display Plate 1 6 Display Controls 1 7 Seal Transformer 1 976178
8 Magnetic Coil 1 976180

10
Notes

Notes
Limited Warranty
ARY, Inc. a distributor and manufacturer of vacuum packaging and other machines
(collectively, the “Goods”), extends to the purchaser of the Goods a Limited One Year
Warranty, from the receipt of the Goods, under terms and conditions set out herein.
All Goods sold by ARY, Inc. are warranted to be free from defects in material and
workmanship at the time of delivery to purchaser. Defective material may be returned to ARY,
Inc. after inspection by an agent of ARY, Inc. and upon receipt from ARY, Inc. of shipping
instructions specic to the defective Goods authorized by ARY, Inc. to be returned. ARY, Inc.
at its sole option, may either (i) replace or repair any defective materials and workmanship
(and return the Goods to purchaser without charge), (ii) refund the purchase price, or (iii) grant
a reasonable allowance with the foregoing procedure.
This warranty is subject to the following limitations:
i. ARY, Inc.’s responsibility and the purchaser’s exclusive remedy under this warranty is
limited to the repair or replacement of defects in material and workmanship, refund of the
purchase price, or grant of a reasonable allowance on account of such defects, all as set forth
above. ARY, Inc. is not responsible for any consequential damages resulting from the breach
of this or any other express or implied warranty with respect to the Goods.
ii. This express warranty is the only warranty applicable. It excludes all other express oral or
written warranties and all warranties implied by law with respect to the Goods, including any
warranties or merchantability or tness for a particular purpose.
iii. Every claim under this warranty shall be deemed waived by purchaser unless made in
writing within one (1) year of the receipt of the Goods to which such claim relates.
iv. This warranty, as to the Goods, is void (a) to repairs made by anyone other than ARY, Inc.
without prior authorization from ARY, Inc., (b) to performance of any system of which ARY,
Inc.’s Goods are a component part, (c) to deterioration by corrosion or any cause of failure
other than defect of material or workmanship, (d) to any components of the Goods, including,
without limitation, Teon tape, lid gaskets and seal wire, or (e) if any of the Good or parts
thereof have been tampered with or altered by someone other than ARY, Inc., or subjected to
misuse, neglect, abuse, or misuse in application.
ARY, Inc.’s maximum liability hereunder, arising from any cause whatsoever, whether based in
contract, tort (including negligence), strict liability, or any other theory of law, shall not exceed
the purchase price. A suit based on any aforementioned cause of action must be commenced
within one year from the date said action accrues.

All Rights Reserved. GameMaster™, VACMASTER®, VacStrip®, Total Freshness System™
and Commercial Culinary Concepts are trademarks or registered trademarks of ARY, Inc. in
the United States and other countries.
ARY, Inc.
P.O. Box 412888
Kansas City, MO 64141
www.MyVacMaster.com
800.821.7849
ARY Inc.
A leading supplier of commercial
products since 1939.