vacuubrand VAC 24 SEVEn User manual

Catch pot for condensate
Instructions for use
OI no.: 20901474Original instructions EN


Accessories
Technology for Vacuum
Systems

220901474_EN_VAC_24seven_Au󰀨abeh-Konds-Rev_V1.0_020921
Catch pot for condensate

The catchpot for condensate is intended to collect condensate at the lower outlet resp.
outlet pipe of a vacuum pumping unit VAC 24seven. The 󰘰lling capacity of the glass
󰘱ask is 2 liter.

8
5
4
7
3
6
2
1

 Material N°
Condensate ask connection KF40_VAC 20640301
4x Hose clamp Cobra D10,5 A2 20636789
34x C-Hose nozzle 8/10 M10x1 20636006
Flask 2 l (borosilicate glass) 20635289
Bottle support with plug-in rubber foot 20635288 + 20638643
Connection NS29 PTFE + O-ring 24x2,5 FPM/FEP 20635307 + 20635286
Joint clip VA KS34/40 20635291
82x 2 m Hose G 10/8-2000 PTFE 20638537
-Original packaging ------
-Instructions for use 20901474

320901474_EN_VAC_24seven_Au󰀨abeh-Konds-Rev_V1.0_020921
Catch pot for condensate

Flat nose plier or combination pliers
Phillips screwdriver size 2
Precondition for connecting the catch pot is the completed installation and assembly of the vacu-
um pumping unit.

123
1. 1. Remove the blanking plug
from the outlet below.
2.2. Place the condensate
󰘱ask connection with the
centering to the outlet.
3. 3. Fix the condensate ask
connection with the clam-
ping ring.
456
4. 4. Fasten the wing nut of the
clamping ring hand-tight.
5. 5. Slide the hose clamps
onto the two hoses.
6. 6. Push the hoses onto the
hose nozzles of the con-
densate ask connection.

420901474_EN_VAC_24seven_Au󰀨abeh-Konds-Rev_V1.0_020921
Catch pot for condensate
78
7. 7. Fix the vacuum hoses with
the hose clamps.
5Installed condensate ask
connection at the outlet of
the vacuum pumping unit.
8. 8. Press the connection into
the ask.
910
Top view
9. 9. Attach the connection with
the joint clip as shown.
10. 10. Install the vacuum hoses from the condensate ask con-
nection to the catch pot in parallel and slightly downwards
so the liquid can ow easily into the ask.
11 12 
11. 11. Shorten the hoses as
required and slide the
hoses onto the hose nozz-
les at the connection of
the ask.
12. 12. Fix the vacuum hoses with
the hose clamps.
5Connected catch pot at
the rear side of the vacu-
um pumping unit.

520901474_EN_VAC_24seven_Au󰀨abeh-Konds-Rev_V1.0_020921
Catch pot for condensate

Manufacturer:
VACUUBRAND GMBH + CO KGVACUUBRAND GMBH + CO KG
Alfred‑Zippe‑Str. 4Alfred‑Zippe‑Str. 4
97877 Wertheim97877 Wertheim
GERMANYGERMANY
Phone:
Head o󰀩ce: [phone]‑0
Sales: [phone]‑5550
Service: [phone]‑5660
Fax: [phone]‑5555
Email:[email protected]
Web: www.vacuubrand.com
Version: 20901474_EN_VAC_24seven_Au󰀨abeh-Konds-Rev_V1.0_020921 – TDD2 – © VACUUBRAND GMBH + CO KG – 2021
Technology for Vacuum
Systems


This manual is only to be used and distributed in its complete and original form. It is strictly the user's
responsibility to carefully check the validity of this manual with respect to the product.