vacuubrand VAC 24seven User manual

Instructions for use
OI no.: 20901488Original instructions EN
Interconnection set for 2 pump modules


Accessories
Technology for Vacuum
Systems

2 20901488_EN_VAC_24seven_Verbindgset-2xPumpmod C-Rev_V1.1_140921
Interconnection set for 2 Pump modules

The interconnection set is intended to extend the suction and the exhaust line between two
pump modules of a vacuum pumping unit VAC 24seven.
The included screws (1)(1) are for xing the Pump module
onto the other existing pump module.

Inlet, suction line
inlet-pipe
Outlet, exhaust line
outlet-pipe
1
2

320901488_EN_VAC_24seven_Verbindgset-2xPumpmod C-Rev_V1.1_140921
Interconnection set for 2 Pump modules

 Order N°.
4x Hexagon screws with ange M10x25 A2 20635293
Interconnection set KF40 (1x outlet + 1x inlet)
2x Tube ID40 PTFE AS Ultra EX 20637156
4x AL clamp DN38 23120058
4x AL support ring KF40, SLW 20635685
4x PTFE core KF40, connection tube 20637190
4x O-ring 32x3, built-in 20611101
4x Broad band clamp DN 40–43 mm 20636496
-Original packaging ------
-Instructions for use 20901623

Fork wrench SW17

123
1.1. Screw the 4 hexagon
screws into the threads of
the lower pump module.
2.2. At rst, screw in the
hexagon screws only
handtight.
3.3. Afterwards re-tighten all
4 hexagon screws with
the fork wrench, size
SW17.
Precondition for installing the interconnection set is that you have already placed one pump mo-
dule above the other.

4 20901488_EN_VAC_24seven_Verbindgset-2xPumpmod C-Rev_V1.1_140921
Interconnection set for 2 Pump modules

1
bb
2

3
4
bb
56
7 8 9
10

11 12
bb

520901488_EN_VAC_24seven_Verbindgset-2xPumpmod C-Rev_V1.1_140921
Interconnection set for 2 Pump modules
13 
14 15 16
17 18 19


6 20901488_EN_VAC_24seven_Verbindgset-2xPumpmod C-Rev_V1.1_140921
Interconnection set for 2 Pump modules

1
cc
dd
2
cc
3
4
dd
58
6 7
cc
8
9
dd
10

720901488_EN_VAC_24seven_Verbindgset-2xPumpmod C-Rev_V1.1_140921
Interconnection set for 2 Pump modules
11 
12 13 14
15 16 17


8 20901488_EN_VAC_24seven_Verbindgset-2xPumpmod C-Rev_V1.1_140921
Interconnection set for 2 Pump modules

[Fig.] Rear side VAC 24seven with interconnection set for 2 pump modules
(Parts on customer side are drawn partially transparent).

B
= Inlet
B= Outlet
 > Before commissioning, check the clamping rings again and tighten them
if necessary.

920901488_EN_VAC_24seven_Verbindgset-2xPumpmod C-Rev_V1.1_140921
Interconnection set for 2 Pump modules


Manufacturer:
VACUUBRAND GMBH + CO KGVACUUBRAND GMBH + CO KG
Alfred‑Zippe‑Str. 4Alfred‑Zippe‑Str. 4
97877 Wertheim97877 Wertheim
GERMANYGERMANY
Phone:
Head o󰀩ce: [phone]‑0
Sales: [phone]‑5550
Service: [phone]‑5660
Fax: [phone]‑5555
Email:[email protected]
Web: www.vacuubrand.com
Version: 20901488_EN_VAC_24seven_Verbindgset-2xPumpmod C-Rev_V1.1_140921 – TDD2 – © VACUUBRAND GMBH + CO KG – 2021
Technology for Vacuum
Systems


This manual is only to be used and distributed in its complete and original form. It is strictly the user's
responsibility to carefully check the validity of this manual with respect to the product.