VADO ZOO-DECKKIT-C/P User manual

Single function handset with hose
ZOO
Keep for future reference
Installation Guide
ZOO-DECKKIT-C/P
Vado
Wedmore Road, Cheddar, Somerset, England BS27 3EB
tel [phone]. fax [phone]
[e-mail]
www.vado.com
This instruction booklet covers these models:
ZOO-DECKKIT-C/P
Version 1, 1-12-22
where inspiration flows

Important - please read
2
Dimensions
3
Please read these instructions carefully before starting installation and keep for
future reference.
Remove all packaging and check the product for missing parts or damage before
starting installation.
Any alterations made to this product and fittings may infringe water regulations and
will invalidate the guarantee.
The installation must comply with all Local/National Water Supply Authority
Regulations/Byelaws and Building and Plumbing (UK:BS6700) Regulations.
We strongly recommend that you use a qualified and registered plumber.
Do not install directly under water flow.
37mm
47mm
185mm
60mm
¾"
28mm

Installation Installation
4 5
Pull off the cover from the Holder.
Remove the nut, metal washer and
rubber washer from the bottom of
the threaded tube.
Insert the holder down through the
hole in the unit, make sure that the
rubber washer is against the top
surface.
From the underside slide the rubber
washer, metal washer and screw
on the nut (removed earlier) and
tighten.
CAUTION: Do not over tighten the
nut as this may damage the unit.
Replace the cover.
Push the smaller end of the shower
hose down through the holder.
Nut
Metal washer
Rubber washer
Threaded tube
Rubber washer
Metal washer
Holder
Place a rubber washer into the
cone at the end of the hose and
screw in the handset.
Place the cone into the holder.
Connect the other end of the hose
to the supply, the unit comes
with an adaptor and washer if
necessary.
Cover
Shower
hose
Cone
Shower
hose
Washer
Washer
Adaptor
Handset
Shower
hose
Holder
Cover
Water supply

To ensure a smooth operation, periodically apply a suitable silicone lubricant
to the hose.
Please note an oil based lubricant should not be used.
Our products are finished to the highest standard and due care needs to be
taken to ensure their looks are retained.
We recommend cleaning all products with a soft damp cloth ONLY and advise
strongly against the use of ALL cleaning products i.e. powders and liquids.
If the above instructions are not followed this will invalidate your guarantee in
the event of a problem occurring.
To remove any build up of limescale on the
shower head, just rub your fingers lightly over
the nozzles.
Cleaning instructions:
Maintenance
6
Guarantee
7
All VADO products come with a 2 year guarantee as standard. Within this guarantee period
VADO will provide replacement parts and any labour [SEE NOTE 1] needed to complete the
product repair.
This standard guarantee may be extended by registering your product to give up to a 15 year
guarantee period. Once registered:
VADO chromed brassware and stainless steel products have a 15 year guarantee
(2 years parts and labour plus 13 years parts only).
VADO Sensori SmartTouch and SmartDial products have a 5 year guarantee
(parts and labour).
VADO Identity and i-tech products have a 5 year guarantee (2 year parts and labour plus 3 years
parts only).
All other VADO products have a 3 year guarantee (2 years parts and labour plus 1 year parts only)
[SEE NOTE 2].
Guarantee Conditions
Our products are guaranteed against manufacturing defects from the date of purchase until the
expiry of the relevant guarantee period shown above.
The guarantee is only valid if:
•The product has been installed, used and maintained in accordance with VADO’s instructions
and subjected to normal use only.
•The defect is not due to use of an unsuitable or inadequate water or power supply.
•The defect is not due to accident, misuse, neglect or incorrect/inappropriate repair (other than
by VADO or VADO authorised agents) or damage caused by foreign objects or substances.
•The extended guarantee is only available if you have completed the Guarantee Registration
Process. This can be done via the VADO website or via phone to our aftersales team.
Registration must be completed within 6 months from date of purchase.
Under the extended guarantee period VADO will, at its option, offer to supply any replacement
product (or component part) assessed to be defective [SEE NOTE 3].
The guarantee (whether standard or extended) is non-transferable to any subsequent owner.
All claims under the guarantee should be notified in the first instance to our Aftersales
department, contact details below, this must be done no later than the last day of the relevant
guarantee period.
All claims must be accompanied by proof of purchase (sales receipt or delivery note) from an
official VADO dealer.
The guarantee does not extend to any consequential loss or damage.
After repair or replacement, the relevant guarantee period will be calculated from the original
date of purchase.
VADO operates a policy of continuous product development and therefore reserves the right to
change the product, packaging and documentation specifications without notice. E&OE.
NOTES:
[1] Labour via our engineer network is only available in the UK. Attendance by a VADO engineer
or sub-contract engineer will be under our standard terms and conditions.
[2] VADO spare parts and shower hoses are under a parts only guarantee.
[3] VADO reserves the right to charge in advance for a product (or replacement part) pending
collection and investigation (at VADO expense) to confirm a defect is due to a manufacturing issue.
If a defect is found the charge will be refunded or cancelled.
This guarantee is in addition to and does not affect your statutory rights as a consumer.
Tel: [phone]
Email: [e-mail]