Valcourt AC04371 User manual

46304A
2022-03-23
SANDBOX
________________________________________________
AC04371
_________________________________________________
INSTALLATION INSTRUCTIONS
_________________________________________________
WARNING : THIS OPTION IS NOT COMPATIBLE WITH THE VARIABLE HALOGEN
LIGHTING KIT (AC04336)
WARNING : IF THE SANDBOX OPTION IS PAIRED WITH A LOG KIT (AC04334,
AC04343), THE FOLLOWING INSTRUCTIONS ARE TO BE USED OVER THE ONE OF
THE LOG KIT.
FRANÇAIS

Page 2
Sandbox installation instruction –AC04371
SANDBOX INSTALLATION
WARNING
Sharp edges! To avoid injuries,
wear safety gloves to install the
sandbox
1. Carefully unpack the sandbox and sand jar. Verify that all components are included and inspect for
hidden damages prior to installation
2. Remove the Invisimesh barrier and the glass door assemblies as per details A, Band Cprior to
sandbox installation.
3. Remove decorative media and log set. If applicable, remove log positioning pins (screws and
spacers) from hearth and burner cover.
Carton Contents :
• Sandbox
• Sand jar
• Screws (8x)
Tools required
• Gloves
• Eye Protection
• Phillips
screwdriver

Page 3
Sandbox installation instruction –AC04371
4. Tighten the small screws (8x) into the embossed surface. WARNING: If the sandbox is paired
with a log set kit (AC04334 or AC04343), use the long screws and spacers provided with the
log set kit. See DETAIL A:
5. WARNING: Do not tighten the screws all the way. Keep a space of 1/8 in (3 mm) between the
head of the screw and the embossed metal.
6. Pour the sand and spread evenly within the sandbox.
ENGLISH
Or
1/8’’

Page 4
Sandbox installation instruction –AC04371
7. Place the sandbox in the heater. The sandbox opening should match the burner opening.
Insert the four tabs located at each corner of the sandbox opening into the burner opening to precisely position
the sandbox on the burner cover. See DETAIL B:
Make sure that every tab are in the burner opening. See DETAIL C:

Page 5
Sandbox installation instruction –AC04371
8. Put the crushed glass back onto the burner.
INSTALLATION OF LOG KIT (AC04334 or AC04343)
9. Follow the log kit installation instructions, except for the following instructions:
10. WARNING: Do not put in place the « J » rock on support « 3 ». Discard “J” rock.
11. Put « B » rock directly on support « 3 ».

Page 6
Sandbox installation instruction –AC04371
INSTALLATION OF RIVER ROCK KIT (AC04346)
1. Assure yourself that the crushed glass is on the burner
2. Position the river rocks on the sand or around. WARNING : Do not put rocks on the burner or
overhanging the burner.
This document is available for free download on the
manufacturer’s website. It is a copyrighted document.
Resale is strictly prohibited. The manufacturer may update
this document from time to time and cannot be responsible
for problems, injuries,or damages arising out of the use of
information contained in any document obtained from
unauthorized sources.
Stove Builder International inc.
250, De Copenhague street,
St-Augustin-de-Desmaures (Québec)
Canada
G3A 2H3
418-908-8002
www.sbi-international.com