VALKYRIE Vind SL125 User manual

VIND
www.my-valkyrie.com
INSTALLATION GUIDE
Valkyrie Vind SL125 / DL125

1
List of Parts SL125
1x Air Cooling Unit
4x Cable Clips
1x Extension Cord
EN
1x Forward Curved Fan
1x Backward Curved Fan

2
1x Intel Backplate
1x Patented Magnetic Logo
4x Intel / AMD Bolts
4x LGA2011 Bolts
4x Nuts
1x Nut Socket
2x AMD Brackets
*Please check the received goods to make sure the parts are complete.
2x Intel Brackets
1x Thermally conductive
silicone grease
EN

3
List of Parts DL125
2x Forward Curved Fan
1x Air Cooling Unit
4x Cable Clips
1x Exstension Cord
EN

4
*Please check the received goods to make sure the parts are complete.
1x Intel Backplate
2x Patented Magnetic Logo 1x Thermally conductive
silicone grease
4x Intel / AMD Bolts
4x LGA2011 Bolts
4x Nuts
1x Nut Socket
2x AMD Brackets2x Intel Brackets
EN

AIR COOLING

3
Intel LGA1200/1700 Installation
We have marked the parts required for installing the Intel LGA1200/1700
platform for you.
1x Intel Backplate 4x Intel / AMD Bolts
1x Nut Socket 1x Exstension Cord
4x Nuts
2x Intel Brackets 4x Fan Cable Clips
2x Fan
SL125
1x Forward Curved Fan
1x Backward Curved fan
DL125
2x Forward Curved Fan
EN

4
Step 2: Install Screws
Install INTEL/AMD bolts to the backplate.
*The larger end of the screw faces down.
Step 1: Install bracket
1. Align the backplate to the corresponding platform holes.
2. Install the backplate onto the back of the motherboard.
* You may slide it to adjust for alignment with the corresponding platform holes.
* Use the inner mounting hole position for 1200
(115X) and the outer mounting hole position for 1700.
EN

5
Step 4: Remove the
protective cover
Take off the protective cover
from the coldplate.
Step 3: Install brackets
Put the brackets onto the bolts and tighten them with nuts using a nut socket.
EN

6
Step 5: Install the cooler
Align the cooler to the holes and screw it onto the brackets.
*Use caution. DO NOT touch the thermally conductive silicone grease pre-applied on the bottom.
Step 6: Complete installation
Please refer to the Install Fan and Wiring for installing and connecting fans to
the cooler.
EN

7
EN

8
Intel LGA2011/2066 Installation
We have marked the parts required for installing the Intel LGA2011/2066
platform for you.
2x Intel Brackets
2x Fan
4x LGA2011 Bolts
1x Nut Socket 1x Extension Cord
4x Nuts
Step 1: Install Screws
Install Intel LGA2011 bolts to the motherboard.
*Make sure that the larger end of the screw faces down.
Fan 4x Fan Cable Clips
SL125
1x Forward Curved Fan
1x Backward Curved Fan
DL125
2x Forward Curved Fan
EN

9
Step 2: Install brackets
Put the brackets onto the bolts and tighten them with nuts using nut socket.
Step 4: Remove the
protective cover
Take off the protective cover
from the coldplate.
EN

10
Step 5: Install the cooler
Align the cooler to the holes and screw it onto the brackets.
*Use caution. DO NOT touch the thermally conductive silicone grease pre-applied on the bottom.
Step 6: Complete installation
Please refer to the Install Fan and Wiring for installing and connecting fans to
the cooler.
EN

11
EN

12
AMD AM4/AM5 Installation
We have marked the parts required for installing the AMD/AM4 platform for you.
2x AMD Brackets 4x Intel/AMD Bolts
1x Nut Socket 1x Extension Cord
4x Nuts
4x Fan Cable Clips
Step 1: Prepare the motherboard
Screw out the 4 bolts. Remove the original bracket on the motherboard. Keep
the original backplate.
2x Fan
SL125
1x Forward Curved Fan
1x Backward Curved Fan
DL125
2x Forward Curved Fan
EN

13
Step 2: Install Screws
Install INTEL/AMD bolts to the backplate.
*The larger end of the screw faces down.
Step 3: Install brackets
Put the brackets onto the bolts and tighten them with a nuts using nut socket.
EN

14
Step 4: Remove the protective cover
Take off the protective cover from the coldplate.
EN