Vanderbilt CCMS2010-IR/IRW User manual

CCMS2010-IR/IRW
2 Megapixel Compact IP Camera
with IR illumination
User Manual

© Vanderbilt 2016
2
1 Copyright
Data and design subject to change without notice. / Supply subject to availability.
Liefermöglichkeiten und technische Änderungen vorbehalten.
© 2016 Copyright by Vanderbilt
We reserve all rights in this document and in the subject thereof. By acceptance of the document the recipient acknowledges these rights
and undertakes neither to publish the document nor the subject thereof in full or in part, nor to make them available to any third party without
our prior express written authorization, nor to use it for any purpose other than for which it was delivered to him.
Wir behalten uns alle Rechte an diesem Dokument und an dem in ihm dargestellten Gegenstand vor. Der Empfänger erkennt diese Rechte
an und wird dieses Dokument nicht ohne unsere vorgängige schriftliche Ermächtigung ganz oder teilweise Dritten zugänglich machen oder
außerhalb des Zweckes verwenden, zu dem es ihm übergeben worden ist.

© Vanderbilt 2016
3
Contents
1Copyright .................................................................................................2
2About this document..............................................................................5
2.1 Content of document.................................................................................5
2.2 Meaning of symbols..................................................................................5
2.3 Target group..............................................................................................5
3Safety .......................................................................................................6
3.1 General safety precautions.......................................................................6
3.2 Transport...................................................................................................6
3.3 Installation.................................................................................................6
3.4 Maintenance..............................................................................................6
3.5 Sensor characteristics...............................................................................7
4EU-directives...........................................................................................8
5Technical data .........................................................................................9
6Details for ordering...............................................................................11
6.1 Package contents....................................................................................11
7Overview ................................................................................................12
7.1 Features..................................................................................................12
7.2 Dimensions .............................................................................................13
7.3 Connectors..............................................................................................14
8Camera cabling .....................................................................................16
8.1 Connect Power........................................................................................16
8.2 Connect Ethernet Cable..........................................................................16
8.3 Connect Alarm I/O...................................................................................17
9System requirements ...........................................................................18
10 WIFI setting............................................................................................19
11 Access camera......................................................................................24
12 Camera settings ....................................................................................27
12.1 Menu Tree of the GUI (Graphical User Interface)...................................27
12.2 Main Tab “Live Player-Web” ...................................................................28
12.3 Main Tab “System”..................................................................................29
12.3.1 System ....................................................................................................29
12.3.2 Security ...................................................................................................30
12.3.3 Network...................................................................................................34
12.3.4 SNMP......................................................................................................36
12.3.5 UPnP.......................................................................................................37
12.3.6 DDNS......................................................................................................38
12.3.7 Mail..........................................................................................................38
12.3.8 FTP..........................................................................................................38
12.3.9 HTTP.......................................................................................................39
12.3.10 Events .....................................................................................................39
12.3.11 Application...............................................................................................39
12.3.12 Motion Detection.....................................................................................43
12.3.13 Network Failure Detection.......................................................................48
12.3.14 Tampering...............................................................................................49
12.3.15 Periodical Event......................................................................................52
12.3.16 Storage Management (Local Recording)................................................53
12.3.17 Recording (Local Recording)..................................................................54
12.3.18 Schedule .................................................................................................55

© Vanderbilt 2016
4
12.3.19 File Location (Snapshots and Web Recording) ......................................56
12.3.20 View Information......................................................................................56
12.3.21 Factory Default........................................................................................57
12.3.22 Software Version.....................................................................................57
12.3.23 Software Upgrade ...................................................................................57
12.3.24 Maintenance............................................................................................58
12.4 Main Tab “Streaming”..............................................................................58
12.4.1 Format (Video Resolution and Rotate Type) ..........................................59
12.4.2 Video Compression.................................................................................61
12.4.3 Video ROI................................................................................................62
12.4.4 Video OCX Protocol................................................................................62
12.4.5 Video Frame Rate...................................................................................63
12.4.6 Video Mask..............................................................................................63
12.4.7 Audio (Audio Mode and Bit Rate Settings) .............................................64
12.5 Main Tab “Camera” .................................................................................65
12.5.1 Exposure .................................................................................................65
12.5.2 White Balance.........................................................................................66
12.5.3 Picture Adjustment..................................................................................67
12.5.4 Backlight..................................................................................................67
12.5.5 Digital Zoom ............................................................................................67
12.5.6 IR Function..............................................................................................68
12.5.7 WDR Function.........................................................................................69
12.5.8 Noise Reduction......................................................................................69
12.5.9 TV System...............................................................................................69
12.6 Main Tab “Logout” ...................................................................................69
13 Configuration Files Export / Import.....................................................70
14 Maintenance...........................................................................................71
15 Disposal .................................................................................................72
16 Appendix –further technical information...........................................73
16.1 Setup Internet Security............................................................................73
16.2 Video Resolution - setups .......................................................................74

About this document
© Vanderbilt 2016
5
2 About this document
2.1 Content of document
This document contains information on the configuration of the product.
2.2 Meaning of symbols
Orientation guide
[-> 3] Cross-reference
Save Button
<Ctrl> Key
Tips and information
2.3 Target group
Commissioning personnel
Configure the product at the
place of installation accord-
ing to customer-specific re-
quirements.
Check the product operabil-
ity and release the product
for use by the operator.
Searches for and corrects
malfunctions.
Has obtained suitable specialist training
for the function and for the products.
Has attended the training courses for
commissioning personnel.
Operating personnel
Performs the procedures for
proper operation of the
product.
No particular qualification required.
Has received instruction from the opera-
tional startup personnel.

Safety
© Vanderbilt 2016
6
3 Safety
3.1 General safety precautions
Read the general safety precautions before installing/configuring/operating the
device.
Follow all warnings and instructions marked on the device.
Keep this document for reference purposes.
This document must always accompany the product.
Liability claim
Use only spare parts and accessories that have been approved by the manu-
facturer.
3.2 Transport
Keep the packaging material for future transportation.
Do not expose the device to mechanical vibrations or shocks.
3.3 Installation
It is recommended that all preparatory work (e.g. fitting of accessories) be
carried out in a workshop prior to final installation.
The environmental conditions recommended by the manufacturer must be
observed. See section 'technical data'.
Do not operate the device close to sources of powerful electromagnetic radia-
tion.
The device should only be used for indoor applications.
The mounting surface must be solid and non-combustible.
Danger of electrical shock/fire hazard/damage to the device due to
incorrect connection
Connect the device only to a power source that complies with SELV
requirements and with the Limited Power Source requirements to
EN 60950-1.
3.4 Maintenance
Do not attempt to service or modify this device yourself. Refer this work to
qualified service personnel.
Do not use liquid cleaners or sprays that contain alcohol, spirit or ammonia.

Safety
© Vanderbilt 2016
7
3.5 Sensor characteristics
The following conditions may be observed when using a CMOS camera. These
are inherent in the design and do not stem from any fault in the camera itself.
Vertical smear:
This phenomenon occurs when viewing a very bright object.
Patterned noise:
This is a fixed pattern, which may appear over the entire monitor screen when the
camera is operated at a high temperature or in a low luminance environment.
Jagged picture:
When viewing stripes, straight lines, or similar patterns, the image on the screen
may appear jagged.

EU-directives
© Vanderbilt 2016
8
4 EU-directives
This product complies with the requirements of the following European directives.
The EU declaration of conformity is available to the responsible agencies at:
Vanderbilt
Clonshaugh Business and Technology Park
Clonshaugh
Dublin 17
Ireland
www.vanderbiltindustries.com
European Directive 2004/108/EC „Electromagnetic Compatibility”
Compliance with the European Directive 2004/108/EC has been proven by test-
ing according to the following standards:
Emitted interference:
EN 55022 Class B
Interference resistance:
EN 50130-4
Power supply
Ensure that the AC power supply is stable and within the rated voltage of the unit.
Use an uninterrupted power supply (UPS) to ensure a continuous function of the
unit in the event of power dips on the AC mains supply.
European Directive 1995/5/EC “Radio and telecommunications
terminal equipment (RTTE)”
Compliance with the European Directive 1995/5/EC has been proven by testing
according to the following standards:
Safety
EN 60950-1
Radio
EN 301 489-1
EN 301 489-17
EN 300 328
’

Technical data
© Vanderbilt 2016
9
5 Technical data
Camera
CCMS2010-IR
CCMS2010-IRW
Image Sensor
1/2.7” Progressive CMOS
Effective Pixels
1920 (H) x 1080 (V)
Minimum Illumination
Colour: 0.2 lux (F2.0) 30 IRE
B/W: 0.02 lux (F2.0) 30 IRE
White Balance
Manual / AWB / ATW
Shutter Speed
1 ~ 1/10000 sec.
Lens
Focal Length
2.8 mm
F Number
F2.0
Operation
Multiple Languages
German / English / Spanish / French / Italian / Japanese / Korean /
Portuguese / Russian / Simplified Chinese / Traditional Chinese
Image Setting
Backlight Compensation
On / Off
White Balance
Auto / Manual / ATW / One Push
Noise Reduction (3D)
On / Off
Wide Dynamic Range
On / Off
Privacy Mask
On / Off
Brightness
Manual
Exposure
Auto / Manual
Sharpness
Manual
Contrast
Manual
Saturation
Manual
Hue
Manual
Digital Zoom
Support
Motion Detection
On / Off / By Schedule
Privacy Mask Type
Color
ICR
Auto / On / Off / Smart
ICR + IR LED*
Auto / LED On / LED Off / Smart IR / Light Sensor
Tampering Alarm
On / Off / By Schedule
Audio
Two-way Audio
Built-In Microphone and Speaker
Compression
G.711 / G.726
Network
Interface
RJ-45, 10/100 Mbps
WiFi 802.11 b/g/n 2.4GHz
Video Compression
H.264 / MJPEG
Video Streaming
Dual Streams- H.264 + H.264 / H.264 + MJPEG
Quad Streams- H.264 x 4 / H.264 x 3 + MJPEG
Video Resolution
H.264- Full HD 1080P / SXGA / HD 720P / XGA / SVGA / D1 / VGA / CIF
MJPEG- Full HD 1080P / SXGA / HD 720P / XGA / SVGA / D1 / VGA / CIF
Frame Rate
Dual Streams- 1080P (30/25 fps) + D1 (30/25 fps)
Protocol
IPv4/v6, TCP/IP, UDP, RTP, RTSP, HTTP, HTTPS, ICMP, FTP, SMTP,
DHCP, PPPoE, UPnP, IGMP, SNMP, QoS, ONVIF, ARP
Security / Authorization
HTTPS / IP Filter / IEEE 802.1X
HTTPS / IP Filter / WEP / WPA /
WPA2 Wireless Security
Alarm
Input
1 Set, 5V 10kΩpull up
Output
1 Set, Photo Relay Output
Event Notification
HTTP / FTP / SMTP
microSD
microSDHC 32GB Support
Supported Web Browser
Internet Explorer (6.0+) / Chrome / Firefox / Safari
User Account
20
Password Levels
User and Administrator
Mechanical
Built-in IR Illumi-
nator
Working distance
up to 5m (dependent on scene reflectance)
Wavelength
850 nm
Number of LEDs
2
Power Connection
PoE / DC Jack
Micro USB (with 1A USB Adapter)
LED Indicator
Power / Link / ACT
Power (Green) / WiFi (Orange)
Connectors
Alarm
4 Pin Terminal Block (Female)
Power
DC Jack
Micro USB Port
Ethernet
RJ-45
N/A

Technical data
© Vanderbilt 2016
10
General
Operating Temperature
-10°C ~ 50°C
Humidity
10% ~ 90%, No Condensation
Dimension
96.51 x 56.00 x 61.40 mm
Weight
120 g
Power Source
PoE / DC 12V
1A USB Adapter 5V
Power Con-
sumption
System
3 W
Built-In IR Illuminator
+0.8 W
Regulatory
CE

Details for ordering
© Vanderbilt 2016
11
6 Details for ordering
Type
Order No.
Designation
CCMS2010-IR
V54561-C112-A100
2 Megapixel IP Compact Camera with
Infrared , LAN PoE
CCMS2010-IRW
V54561-C112-A200
2 Megapixel IP Compact Camera with
Infrared , WiFi
Further products and accessories can be found in the internet:
https://is.spiap.com/products/video.html
6.1 Package contents
IP camera
Resource kit CD
Quick Install Guide
Wall Bracket
Micro SD card (4GB)
Jack/Terminal Adapter (PoE model only)
12VDC Power Adapter (PoE model only)
5VDC Power Adapter with USB/Micro-USB cable (WiFi model only)

Overview
© Vanderbilt 2016
12
7 Overview
The CCMS2010-IR/W compact IP Camera is an easy setup camera with PoE or
WiFi (depending on Model) supported to reduce complicate cabling.
The IP Camera has a built-in microphone and speaker which allows two-way audio
communication. 2 Megapixel Resolution is supported for providing high definition
images. Quad Streams Compression (H.264 Baseline / Main / High Profile +
MJPEG) are available for efficient bandwidth and storage management. For low-
light situations, the IP Camera has incorporated Day/Night ICR technologies to
capture clear images.
7.1 Features
Progressive Scan CMOS Sensor
2M Resolution
Quad Streams Support
Dual streams- Full HD 1080P Real-Time + D1 Real-Time
Quad Streams Compression- H.264 Baseline / Main / High Profile + MJPEG
Multi-language Support
Wide Dynamic Range
Built-In Microphone and Speaker
Motion Detection
Privacy Masks
Smart Picture Quality / 3D Noise Reduction
Smart IR Mode
Day/Night (ICR)
IR LED Module (working distance up to 5 m)
microSD Support
ONVIF Support

Overview
© Vanderbilt 2016
13
7.2 Dimensions
The dimensions of the IP Camera are shown below.
CCMS2010-IR
CCMS2010-IRW

Overview
© Vanderbilt 2016
14
7.3 Connectors
The diagrams below show the connectors of the IP Camera. Definition for each
connector is also given as follows.
CCMS2010-IR
a) N
o
.
Connector
Definition
1
PoE NETWORK
For Ethernet cable and PSE connection
2
Network LEDs
Network connection and activity indication
3
DC 12V Connector
For power connection
4
Alarm I/O
1
Alarm Output +
2
Alarm Output −
3
Alarm Input +
4
Alarm Input −
5
microSD Card Slot
For videos and snapshots storage
6
Default Button
Press the button with a proper tool for at least 20 seconds
to restore the system.

Overview
© Vanderbilt 2016
15
CCMS2010-IRW
i) N
o
.
Connector
Definition
1
Micro USB Port
For Power connection
2
Alarm I/O
1
Alarm Output +
2
Alarm Output −
3
Alarm Input +
4
Alarm Input −
3
Power LED
Power indication
4
WLAN LED
Wireless network connection and activity indication
5
microSD Card Slot
For videos and snapshots storage
6
Default Button
Press the button with a proper tool for at least 20 seconds
to restore the system.

Camera cabling
© Vanderbilt 2016
16
8 Camera cabling
Please follow the instructions below to complete IP Camera connection.
8.1 Connect Power
CCMS2010-IR Please refer to section 7.3 Connectors. Alternatively, users can power the cam-
era by PoE. Use an Ethernet cable and connect it to the camera and a PoE
switch.
NOTE: If PoE is used, make sure Power Sourcing Equipment (PSE) is in used in
the network.
CCMS2010-IRWPlease refer to section 7.3 Connectors. Plug the camera’s Micro USB Power Sup-
ply Adapter connecting with the Micro USB cable into the power outlet, and con-
nect the other end of the cable to the camera’s Micro USB port. Alternatively, con-
nect the Micro USB Cable to the Micro USB port of the camera and plug the other
end of the cable into the USB port of the computer.
8.2 Connect Ethernet Cable
CCMS2010-IR
Use of Category 5 Ethernet Cable is recommended for network connection. To
have best transmission quality, cable length shall not exceed 100 meters. Connect
one end of the Ethernet cable to the PoE Network connector of the IP Camera,
and plug the other end of the cable to the network switch or PC.
NOTE: In some cases, Ethernet Crossover cable might be needed when connect-
ing the IP Camera directly to the PC.
Check the status of the link indicator and activity indicator LEDs. If the LEDs are
unlit, please check LAN connection.
Green Link Light indicates good network connection.
Orange Activity Light flashes for network activity indication.
CCMS2010-IRW
Check the status of the Wireless LAN (WLAN) LED. If the LED is unlit, please
check if the camera is connected to the network.

Camera cabling
© Vanderbilt 2016
17
The LED in orange light indicates good network connection.
8.3 Connect Alarm I/O
The camera equips one alarm input and one relay output for alarm application. Re-
fer to alarm pin definition below to connect alarm devices to the IP Camera if
needed.
PIN 1: Output +
PIN 2: Output −
PIN 3: Input +
PIN 4: Input −

System requirements
© Vanderbilt 2016
18
9 System requirements
To perform the IP Camera via web browser, please ensure the PC is in good net-
work connection, and meet system requirements as described below.
Items
System Requirement
Personal Computer
1. Intel®Pentium®M, 2.16 GHz or
Intel®CoreTM2 Duo, 2.0 GHz
2. 2 GB RAM or more
Operating System
Windows VISTA / Windows XP / Windows 7 / Windows 8
Web Browser
Microsoft Internet Explorer 6.0 or later
Firefox
Chrome
Safari
Network Card
10Base-T (10 Mbps) or 100Base-TX (100 Mbps) operation
Viewer
ActiveX control plug-in for Microsoft IE

WIFI setting
© Vanderbilt 2016
19
10 WIFI setting
Before accessing the IP Camera, the initial connection setting of the IP Camera
must be setup. However, with different ways of powering on the IP Camera, cam-
era connection will also be configured differently. The following describes how to
setup the IP Camera via the Power Adapter Connection and USB Connection.
Power Adapter Connection Setup (Recommended)
When the IP Camera is powered on with the power adapter, the camera is an
Access Point (AP) by default. As an AP, the camera serves as central transmitter
and receiver of Wi-Fi signals. In this case, users have to switch the IP Camera
from an AP to a WiFi device. Otherwise, the camera cannot be performed as a
surveillance camera. Follow the steps below to switch the IP Camera from an AP
to a WiFi device.
Step 1: Power on the IP Camera with the power adaptor.
Step 2: Enable WLAN on users’ computer or laptop.
Step 3: Click on the internet connection icon < > at the bottom-right of the
taskbar, a list of Access Points will be displayed.
Step 4: Double click on <WiFiCamera> to connect the Access Point. The de-
fault password of the AP is 87654321.
Step 5: Open a web browser and enter the default IP address of the IP Camera,
192.168.0.10. Then input the default username / password (admin /
admin).
Step 6: After the Browser-based Viewer is displayed, click on the <WiFi> tab to
connect the IP Camera to an Access Point.
Step 7: Under <Set WiFi camera connected to an Access Point>, select a pre-
ferred Access Point and enter its password, and then click <Connect>.
See the figure below.
Step 8: Click <OK> in the prompt window.

WIFI setting
© Vanderbilt 2016
20
Step 9: A message window will be displayed, click <Yes> to close the Browser-
based Viewer.
The IP address of the IP Camera will be altered. Thus, users have to re-search the
new IP address of the IP Camera by running the device search tool. After retriev-
ing the new IP address of the IP Camera, users can continue to access and setup
other settings of the camera.
NOTE: For further information about the device search tool, please refer to section
11. Access Camera.
USB Connection Setup
If the power of the IP Camera is supplied via the USB port of a computer, users
have to install the IP Camera driver (RNDIS/Ethernet Gadget driver) to the com-
puter. The following describes how to install the driver and setup the IP Camera
network connection settings.
Note: The USB cable used for this method shall be a USB data cable (not provid-
ed).
Step 1: Connect the IP Camera to the USB port of the computer.
Step 2: Click on <Start>, type <cmd> in the search bar and select cmd.exe.
Then, input <ipconfig>. Note down the IP address under Local Area
Connection.
Step 3: Right click on the Computer icon on the desktop, and then select
<Properties> →<Device Manager>.
Step 4: Double click on <RNDIS/Ethernet Gadget> under <Other devices>.