Vantrue N1 PRO User manual

www.vantrue.net/contact facebook.com/vantrue.live
f
Always a surprise in Vantrue
Hey, find us here:
- 1 -

- 2 -
What's in the box?
Was ist In der Box?
Qu'y a-t-il dans la boîte?
ボックスに何が入っていますか?
Getting Started
Vorbereitung vor dem Einschalten
Préparation avant la mise en marche
入門
Basic Operation
Grundlegende Operation
Opération de base
基本操作
Specifications
Spezifikationen
Spécifications
製品仕様
Warranty & Support
Garantie und Unterstützung
Garantie et support
保証とアフターサービス
VERZEICHNIS
CONTENU
1.
Camera Overview
Dle übersicht über Kamera
Vue d'ensemble de la caméra
ドラレコの概要
2.
3.
4.
5.
6.
3
26
49
73
4
27
50
74
6
29
52
75
10
33
56
79
23
46
70
91
24
47
71
92

- 3 -

- 4 -
14
VTN1P8LXXXX
Emergency/P

- 5 -
14 Serial Number Serial Number for Warranty Registration.

- 6 -
NOTE:

- 7 -
NOTE: To insert the card, power off the camera first, then push the card
into the slot until it clicks agin, otherwise the dash cam will say goodbye
and shut off. To remove the card, power off the camera first too. Please
use a genuine microSD memory card of from 8GB to 256GB with a speed
rating of class 10 or higher. We recommend Samsung Pro Endurance cards
or Samsung Evo cards. Samsung Micro SD cards would only be made in
either Korea or the Philippians. Please be sure to buy a genuine Samsung
card.
3.2 Installing memory card (Recommend Samsung Pro
Endurance Card or Samsung Evo Card)
NOTE: When using a 64GB, 128GB or 256GB MicroSD card, please
format it to FAT32 on the camera first.
Please insert the card into the camera. If it says 'please insert TF
card' or 'error card please format' here, please press the recording
button(OK button) and thenpress the power button to access into
the menu, go 'system setup' and choose 'Format SD Card'. Then select
the " OK " and wait for 10 seconds. Then the card will be formatted
successfully.
(If you format it on computer, please search online on "How to
formata 64GB microSD card to FAT32".）
REMINDER:

- 8 -

- 9 -
vehicle's cigarette
lighter port

- 10 -

- 11 -
Press OK button to enter the settings, and press UP/DOWN button
to select setting items.
-Resolution: Default setting is 1920X1080/30FPS (fps: Frames per Second).
Press Down button to select 1280x720/30FPS.
-Loop Recording:
Default setting is 3 mins per video clip. Press Down
button to select among 1 min, 3 mins, 5 mins and OFF.
-G-Sensor: Press Down button to select among High, Medium,
Low and OFF.
-Audio Recording: Default setting is ON. Press Down button to
select OFF.
-Parking Mode: Default setting is OFF. Press Down and OK button
to turn it ON/OFF.
-Exposure: Default setting is 0. Press Down button to select among
+2.0, +1.0, +0.0, -1.0, -2.0
-Number plate: Default setting is OFF, Press Down and OK button
to set your car number.
-Stamp: Default setting is Date/Time Stamp, Logo Stamp, Number
Stamp, Speed Stamp, GPS Location Stamp, Press OK button to turn
off/on the stamp.
-Rotate Display: Default setting is OFF. Press OK button to turn it
ON/OFF.
-Time Lapse: Default setting is OFF, Press Down Button to select
among 1 sec, 5 secs, 10 secs and OFF.
-Power Off Delay: Default setting is ON, the camera will auto end
recording and turn off when you shut off the car. Press Down
button turn it OFF to disable it.

- 12 -
-Auto LCD Off: If you choose 3 Min, it will turn off the camera screen
3 minutes after recording commences. If you choose OFF, the LCD
screen will always stay on. Press Down button to select among 30
Secs, 1Min and 3 Mins, or turn it OFF to disable it.
-Device Sound: Default setting is ON. Press OK button to enable or
disable it.
-Non-use Auto Power OFF: Default setting is 3 mins, when the
camera is on but not in use, it will auto turn off after 3 minutes of
inaciivity. To use this function, please turn off the parking mode first.
Press Down button to select among 1 min, 2 mins and 3 mins, or turn
it OFF to disable it.
-Frequency: Default setting is 60Hz. Press Down button to select
50Hz or 60Hz.
-System info: View the Version of the dash cam.
-Default Setting: Press Down and select OK to set the device back
to factory settings.
Note: To use the GPS function, you need to purchase an extra GPS
mount for the camera.
-GPS : Default setting is Off. Press Down button to turn ON/OFF.
-Speed Unit: Default setting is MPH. Press UP button to select KMH
or MPH.
When the setup finished, press Power button to exit.
C. GPS setup
When the setup finished, press Power button to exit.
Check and delete videos/photos in the Normal/Event folder.
-Event: Event videos (detected by G-Sensor and manually locked)
stored.
-Normal: Normal recording videos and images stored.
-Photo: Images stored.
-All: All Images and video stored.
D. Files
Go to the MENU interface, and “System Setup”>“Time& Date”,
4.3 Date/Time setting

- 13 -
This feature avoids any chance of the screen being a distraction
in the vehicle, especially at night when the illumination from the
LCD screen can be a nuisance or even a hazard to the driver.If
you choose 3 Min, the camera’s LCD will light off after 3 minutes
but still recording with blue light blinks. You can press any button
to light on the screen.
4.4 Auto LCD OFF
press Down button to set. In the time setup interface, press UP

- 14 -
Off
30 Sec
1 Min
3 Min
Please go to System Setup to adjust this time to 30 Secs, 1Min and
3 Mins, or turn it OFF to disable it so the LCD can always stay on.
4.5 Loop recording

- 15 -
2
Emergency/P
4.6 Event recording

- 16 -
Note: The camera will auto overwrite old Event videos once the Event
folder has accumulated 30% of the card capacity. Please regularly
transfer important videos to your PC or another storage location
(e.g. external hard drive). To maintain good read/write performance,
the MicroSD card should be formatted every 1-2 weeks.
4.7 Audio recording

- 17 -
To use the parking mode, go to “Record Setup”>“Parking Monitor”
and select ON. Parking mode icon will appear at the left side of
the screen.
After activating the Parking Monitor, the camera will auto switch to
parking mode once it detects no movement in front of the camera
for 5 minutes while recording. Parking mode icon will turn into orange.
When the dash camera switch into parking mode with power supply,
once it detects movement at the front, it will start auto-recording;
it will stop recording after 10 seconds of inactivity.
To manually activate Parking Mode, long press the Emergency/P button
until the P icon turns into orange.
4.8 Parking mode
4.8.1 Triggered by Motion Detection When Charging

- 18 -
NOTE: To keep the camera working in parking mode, please keep
powering it with an extra power bank or hardwire it to the car battery
directly. Don’t recommend to keep the camera working all the time
for over 10 hours.
NOTE: Please ensure the battery of the dash cam is fully charged.
After activating the Parking Monitor, when the camera turns off, it
will turn on and end recording after 20 seconds once the camera
detects crash in front, and the videos will be locked in the ''Event'' file.
4.8.2 Triggered by Collision Detection without External Power Supply

- 19 -
Emergency/P
4.9 Capture a picture
4.10 Connecting external GPS receiver (Optional accessory)