Vantrue Nexus 5 User manual

4-channel Voice Controlled
User Manual

Hey, Find Us Here:
Www.vantrue.net/contact Facebook.com/vantrue.live

Contents
01
02
03
04
05
06
07
1
2
4
12
30
31
32

1. What’s In The Box?
M. CplFilter N. Wireless Remote
Control
A. B. Rear CameraC. Gps Mount
D. E. Rear Camera F.
H.G.
J. K.
I.
L.
3m
4-channel Voice Controlled
Smart Dash Cam
Quick User Guide
Nexus 5(N5)
- 1 -

- 2 -
2.
10 12
11
6
1
78
2
4
3

- 3 -
Button Instruction
6
2 13 4
LedIndicator
Steady Green Light
Blinking Green Light

After inseing the memo card, if the screen prompts "Card
error, please format" (please note that the recorder does not
record at this time), please directly press the button to enter
the menu, then go to "system setup" and choose "format" to sta
the formatting process.
- 4 -
Fc
R
Rc
F
Mp/h
14:25:35 06-01-202300:00:37
35
1944p+1080p+1080p+1080p 30fps
Wi O
Gps O
Video
Mic On
Mic O
Emergency File Locked
Card Error
Privacy Mode
Remote Control Is Connected
3. Installation
3.1
High-speed Microsd Card).
Ok
System Setup 5/14
Format Sd Card
Wi-fi
Voice Control
Voice Content

- 5 -
Format SD Card
OK
All data will be deleted!
Format SD Card
OK
Format SD Card
Format SD Card
OK
Format successful
Note:
3.2 Installation
3.2.1 lnstallation of Camera Mount

- 6 -
3.2.4 Installing the Electrostatic Stickers
Note:
Pleasepeel off this mask
AFTERapplication completed
Please peel off this
mask BEFORE application
3.2.2 Car Charger Installation
Connect one end of the car charger to the car cigarette lighter
and the other end to the Type C po on the front camera mount.
Sta the ignition, waiting for the dash cam to sta.
3.2.3 Power On Dash Cam, Select the Installation Position
Before installation, please power on the dash cam and check
whether the shooting angle of the front and interior lens are
appropriate through the recording view.

- 7 -
3.2.5 Installing The Front Camera
Note:

- 8 -
3.2.7 Wire Storage
3.3
Note:
Note:

- 9 -
3.4 Wi Connection

- 10 -
Note:
•
•
•

- 11 -
3.5 APP Operation
Lens Correction
Line
Mileage
Statistics
Full Screen
Recording
Camera Setting
Video preview: In the real-time preview inteace, you can
switch to the full-screen preview mode by clicking the
full-screen icon or placing the phone horizontally, click the
window switch icon to switch video windows, only multi
channel recording can use this feature.
Video playback: The video and photo les recorded on the SD
card can be viewed in the app, and the video can be played
backafter clicking the le.
Video download: You can select the video or picture you want
todownload in the SD card browsing inteace or in the video
playback area. After downloading the video, if you play it in
the local le of the app inteace, you can view the GPS track
of the video.
Video snapshot: You can capture the current screen in the
real-time preview inteace of the app.
Mileage statistics: You can click to download mileage
information as required, and the mileage information will be
saved in the APP as a picture or PDF le.
Lens correction line: Correct the lens balance via accurate
crosshair so that the video screen will not be skewed.
OTA upgrade: You can upgrade the N5 dash cam via APP,
please refer to 4.2.12 for more details.
1.
2.
3.
4.
5.

- 12 -
3.6 APP Upgrade
Vantrue Ltd.
Vantrue
Vantrue
9:41
Today Games Apps Search
Back
4. Basic Operation
4.1 Menu Settings
Record Setup
OK

B. Loop Recording: Default setting is 1 min. You can choose the
options among 1/3/5 min and OFF.
C. IR LEDs: The front cabin camera and rear cabin camera are
equipped with IR LED lights. Default setting is Auto. You
canselect auto, on or o.
D. G-Sensor: Select the level of G-sensor you need, then you can
set 3 directions (Front + Rear/Left + Right/Up + Down). The
G-sensor value in each direction can be selected as 1/2/3
(default) /4/5/O. The higher the sensitivity level, the easier it is
to trigger event recording. G-sensor is the most sensitive when
set to 5.
1280x720P 30FPS
- 13 -
1280x720p 30fps

E. Privacy Mode: Default is OFF, you can also select on. After
turning it on, the video will be recorded in privacy mode.
F. Audio Recording: The default is ON. Set recording to on or o.
G. Exposure: The default value is +0.0. Adjust the exposure of the
lens.
H. REC Status Light: Default setting is ON. You can choose to
turn on/o the recording status light.
I. WDR: The default is ON. You can choose to turn it o.
J. Rear HDR: The default is ON. Set to on or o.
K. Rotate Display: The default is o. You can choose to ip the
front and front cabin video, rear and rear cabin screen up and
down (180 degrees).
L. Mirror: The default is ON. If you turn it on, the front cabin, rear
cabin, rear recording screen will be displayed in mirror mode.
M. Number Plate: Select the number or letter to be set. After
setting, your license plate number can be displayed in the
recorded video.
N. Stamp: Enable or disable the watermark stamp on video and
photos. The watermark stamp includes time and date label,
VANTRUE label, license plate number, GPS location information,
and speed label. All enabled by default.
O. Time Lapse: The default value is disabled. You can choose to
enable 1FPS/5FPS/10FPS/15FPS.
P. Parking Mode: You can choose the parking mode you need,
including Collision Detection/Motion Detection/Low Bitrate
Recording/Low Framerate Mode/OFF, The default is OFF.
Q. Low-light Night Vision in Parking Mode: The default is ON.
When turned ON, it can optimize the recording eect of videos in
parking mode.
R. Motion Detection Area: The motion detection range of the
front and rear areas can be adjusted respectively.
S. Mileage statistics: The default is ON, and the GPS mileage
information will be stored in the memo card, you can view it on
the computer or expo the le through the mileage statistics
function in the APP.
T. GPS Settings: GPS is enabled by default. GPS ON/OFF
settings, speed unit settings, and GPS information are all set here.
System Setup：
A. Language: Available languages are English/Français/Español
/Deutsch/ Italiano/简体中文/русский/日本語/Polski/한국어.
B. Wi-Fi: You can set the WiFi function, switch WiFi mode, and
- 14 -

- 15 -
•
•
view WiFi information here. The default is automatically turn o
WiFi after 10 minutes without connection. WiFi will stay on in the
background if you turn on the Auto ON option. The default WiFi
mode is 5G. After turning on, you can connect the WiFi and
operate the N5 dash cam through the mobile phone. WiFi
Information Displays the WiFi name and password.
C. Voice Control: The default sensitivity is Standard. Voice
commands can be recognized after the option is turned on. You
can choose options such as low sensitivity/high sensitivity/stan�
dard/OFF.
D. Voice Content: Voice recognition commands. You can use
dierent commands to remote control the camera to work.
E. Format Memo Card: Format all data on the memo card.
F. Format Reminder Setup: You can select the reminder options:
15 Days, 1 Month, and OFF. Default is o. When the time is up,
you can choose "OK" to format, or choose "Next" to recalculate.
G. Date & Time: There are two ways to set the time and date:
Automatic GPS update: GPS automatic update is enabled by
default. The date and time will be automatically updated based
on your time zone, please select the correct time zone.
Manual date/time setting. You can choose to turn o automatic
GPS update, turn on manual date/time setting, and manually
correct date and time.
Summer/Winter time automatic switching. The default is OFF.
After this function is enabled, the system automatically switches
between summer time and winter time.
* This feature is available in Noh America only. Time error may
occur in other regions.
The date format and time zone settings can also be set under
this menu.
H. Auto LCD O: The default is OFF. Set the time to automatically
turn o the LCD display after no operation.
I. Device Sound: Set the volume of the device. The default volume
level is 2, the lowest is 0, and the highest is 5.
J. Prompt Tone: According to dierent situations, the dash cam is
set with 5 kinds of prompt tones, which are power-on/o sound,
keys sound, le locked sound, format sound, and abnormal stop
recording reminder. All prompt tones are turned on by default.
K. Frequency: Dierent countries have dierent frequencies. In
order to avoid aecting the video, you can choose 50Hz or 60Hz
frequency according to dierent regions.

- 16 -
L. System Info:
N. Default Settings:
Files:
A. Event:
B. Normal:
C. Photo:
D. All:
Note:
Ok
Files 1/4
Event Video
Normal Video
Photo
All Files

- 17 -
4.2 Key Features
Note:
Fc
R
Rc
F
Mp/h
14:25:35 06-01-202300:00:37
35
1944p+1080p+1080p+1080p 30fps