Varytec LED Magicball User manual

Manual
LED Magicball

2 / 8

3 / 8
Table of contents
1. Safety instructions............................................................................................................................ 4
1.1. FOR SAFE AND EFFICIENT OPERATION............................................................................ 4
2. Introduction....................................................................................................................................... 5
2.1. Modes...................................................................................................................................... 6
2.1.1. Sound-to-light .................................................................................................................. 6
2.1.2. Automatic programs ........................................................................................................ 6
3. Technical data.................................................................................................................................. 6

4 / 8
1. Safety instructions
•This device is suitable for indoor use (not outdoors) only.
•All modifications to the device will void the warranty.
•Repairs are to carry out by skilled personnel only.
•Use only fuses of the same type and original parts as spare parts.
•Protect the unit from rain and humidity to avoid fire and electric shocks.
•Make sure to unplug the power supply before opening the housing.
1.1.FOR SAFE AND EFFICIENT OPERATION
Be careful with heat and extreme temperature
Avoid exposing it to direct rays of the sun or near a heating appliance.
Not put it in a temperature bellow 32°F /0°C, or exceeding 104°F /40°C.
Keep away from humidity, water and dust
Do not place the set in a location with high humidity or lots of dust.
Containers with water should not be placed on the set.
To avoid placing on un-stable location
Select a level and stable location to avoid vibration.
Do not use chemicals or volatile liquids for cleaning
Use a clean dry cloth to wipe off the dust, or a wet soft cloth for stubborn dirt.
If out of work, contact sales agency immediately
Any troubles arose, remove the power plug soon, and contact with an engineer for repairing,
do not open the cabinet by yourself, it might result a danger of electric shock.
Take care with the power cable
Never pull the power cable to remove the plug from the receptacle, be sure to hold the plug.
When not using the device for an extended period of time, be sure to disconnect the plug
from the receptacle .

5 / 8
Important: Damages caused by the disregard of this user manual are not subject to
warranty. The dealer will not accept liability for any resulting defects or problems. Make sure
the electrical connection is carried out by qualified personnel. All electrical and mechanical
connections have to be carried out according to the European safety standards.
2. Introduction
Thank you for purchasing the "LED Magic Ball", a light effect for domestic use. The device is supplied
with a remote control and is only with this to use. You can choose between two different sound-to-light
modes and 7 different automatic programs via the remote.
1. ON/OFF: With this button you switch the device on or off.
2. Sound-activate: With this button you can choose between two sound-to-light modes.
3. Auto programs: With these buttons you can choose between 7 automatic programs.

6 / 8
2.1.Modes
2.1.1. Sound-to-light
S1 Sound trigger color change: Strobe, ON, OFF
S2 Sound trigger color change, no strobe
2.1.2. Automatic programs
A1 Color change: Red, Red/Yellow, Red/Pink
A2 Color change: Green, Red/Green, Green/Yellow
A3 Color change: Blue, White
A4 Color change (3 colors)
A5 Color change (7 colors)
A6 Color change, no strobe
A7 Strobe
3. Technical data
Power supply AC 90-240V; 50/60Hz
LED 6x1W LED
Power consumption Max. 8W
Modes Automatic, Sound-to-Light
Control via remote (IR)
Weight 0.56 kg

7 / 8

8 / 8
Importer:
B & K Braun GmbH
Industriestraße 2
D-76307 Karlsbad
www.bkbraun.com
[e-mail]