Varytec VP-1 FC User manual

VP-1 FC
DMX Video RGB + WW Panel
LED spotlight
User manual

Musikhaus Thomann
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: [phone]
E-mail: [email protected]
Internet: www.thomann.de
02.07.2021, ID: 517377

Table of contents
1 General information................................................................................................................................. 5
1.1 Further information........................................................................................................................... 6
1.2 Notational conventions.................................................................................................................... 7
1.3 Symbols and signal words............................................................................................................... 8
2 Safety instructions.................................................................................................................................. 11
3 Features....................................................................................................................................................... 16
4 Installation.................................................................................................................................................. 17
5 Starting up.................................................................................................................................................. 21
6 Connections and controls................................................................................................................... 24
7 Operating.................................................................................................................................................... 28
7.1 Starting the device........................................................................................................................... 28
7.2 Main menu.......................................................................................................................................... 29
7.2.1 DMX address.................................................................................................................................. 29
7.2.2 DMX mode...................................................................................................................................... 30
7.2.3 Master / slave mode..................................................................................................................... 30
Table of contents
VP-1 FC DMX Video RGB + WW Panel 3
LED spotlight

7.2.4 Colour macros................................................................................................................................ 31
7.2.5 Colour temperature WW............................................................................................................ 35
7.2.6 Lighting behaviour....................................................................................................................... 36
7.2.7 Display lighting............................................................................................................................. 37
7.2.8 Behaviour on DMX control failure.......................................................................................... 38
7.2.9 Dimmer curve................................................................................................................................ 39
7.2.10 Software version......................................................................................................................... 40
7.2.11 Dimmer settings......................................................................................................................... 40
7.2.12 Factory defaults.......................................................................................................................... 41
7.3 Menu overview................................................................................................................................. 42
7.4 Functions in 4-channel DMX mode........................................................................................... 44
7.5 Functions in 8-channel DMX mode........................................................................................... 45
8 Technical specications....................................................................................................................... 47
9 Plug and connection assignment.................................................................................................... 50
10 Troubleshooting...................................................................................................................................... 51
11 Cleaning....................................................................................................................................................... 53
12 Protecting the environment.............................................................................................................. 54
Table of contents
4VP-1 FC DMX Video RGB + WW Panel
LED spotlight

1 General information
This user manual contains important information on the safe operation of the device. Read and
follow all safety notes and all instructions. Save this manual for future reference. Make sure
that it is available to all persons using this device. If you sell the device to another user, be sure
that they also receive this manual.
Our products and user manuals are subject to a process of continuous development. We there‐
fore reserve the right to make changes without notice. Please refer to the latest version of the
user manual which is ready for download under www.thomann.de.
General information
VP-1 FC DMX Video RGB + WW Panel 5
LED spotlight

1.1 Further information
On our website (www.thomann.de) you will nd lots of further information and details on the
following points:
Download This manual is also available as PDF le for you to download.
Keyword search Use the search function in the electronic version to nd the topics of
interest for you quickly.
Online guides Our online guides provide detailed information on technical basics
and terms.
Personal consultation For personal consultation please contact our technical hotline.
Service If you have any problems with the device the customer service will
gladly assist you.
General information
6VP-1 FC DMX Video RGB + WW Panel
LED spotlight

1.2 Notational conventions
This manual uses the following notational conventions:
The letterings for connectors and controls are marked by square brackets and italics.
Examples: [VOLUME] control, [Mono] button.
Texts and values displayed on the device are marked by quotation marks and italics.
Examples: ‘24ch’ , ‘OFF’ .
Letterings
Displays
General information
VP-1 FC DMX Video RGB + WW Panel 7
LED spotlight

The individual steps of an instruction are numbered consecutively. The result of a step is
indented and highlighted by an arrow.
Example:
1. Switch on the device.
2. Press [Auto].
ðAutomatic operation is started.
3. Switch o the device.
1.3 Symbols and signal words
In this section you will nd an overview of the meaning of symbols and signal words that are
used in this manual.
Instructions
General information
8VP-1 FC DMX Video RGB + WW Panel
LED spotlight

Signal word Meaning
DANGER! This combination of symbol and signal word indicates an
immediate dangerous situation that will result in death or
serious injury if it is not avoided.
WARNING! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in death or serious
injury if it is not avoided.
NOTICE! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in material and
environmental damage if it is not avoided.
Warning signs Type of danger
Warning – high-voltage.
Warning – dangerous optical radiation.
General information
VP-1 FC DMX Video RGB + WW Panel 9
LED spotlight

Warning signs Type of danger
Warning – suspended load.
Warning – danger zone.
General information
10 VP-1 FC DMX Video RGB + WW Panel
LED spotlight

2 Safety instructions
This device is intended for use as an electronic lighting eect by means of LED technology. The
device is designed for professional use only and is not suitable for use in households. Use the
device only as described in this user manual. Any other use or use under other operating con‐
ditions is considered to be improper and may result in personal injury or property damage. No
liability will be assumed for damages resulting from improper use.
This device may be used only by persons with sucient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experience. Other persons may use this
device only if they are supervised or instructed by a person who is responsible for their safety.
Extend the operating life of the device by regular breaks and by avoiding frequent
switching on and o. The device is not suitable for continuous operation.
Intended use
Safety instructions
VP-1 FC DMX Video RGB + WW Panel 11
LED spotlight

Safety
DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not within reach of babies and young children. Choking
hazard! Ensure that children do not detach any small parts (e.g. knobs or the like) from the unit. They could swallow the pieces and
choke! Never let children unattended use electrical devices.
DANGER!
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present. Never remove any covers. There are no user-serviceable parts
inside. Do not use the device if covers, protectors or optical components are missing or damaged.
WARNING!
Eye damage caused by high light intensity
Never look directly into the light source.
WARNING!
Risk of epileptic shock
Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons should avoid looking at strobe lights.
Safety instructions
12 VP-1 FC DMX Video RGB + WW Panel
LED spotlight

WARNING!
Risk of injury caused by falling objects
Make sure that the installation complies with the standards and rules that apply in your country. Always secure the device with a
secondary safety attachment, such as a safety cable or a safety chain. Secure the barn door with a safety cable on the spotlight after
installation. The safety cable must run outside the barn door and must not interfere with the light emission.
NOTICE!
Risk of re
Do not block areas of ventilation. Do not install the device near any direct heat source. Keep the device away from naked ames.
NOTICE!
Risk of re and overheating
The use with closed barn doors can cause re or overheating in the spotlight. The lifetime of the LEDs will be reduced when using
the device with closed barn doors. Otherwise, the integrated thermostat causes a thermically reasonable shutdown. Use the device
only with open barn doors.
Safety instructions
VP-1 FC DMX Video RGB + WW Panel 13
LED spotlight

NOTICE!
Operating conditions
This device has been designed for indoor use only. To prevent damage, never expose the device to any liquid or moisture. Avoid
direct sunlight, heavy dirt, and strong vibrations. Only operate the device within the ambient conditions specied in the chapter
‘Technical specications’ of this user manual. Avoid heavy temperature uctuations and do not switch the device on immediately
after it was exposed to temperature uctuations (for example after transport at low outside temperatures). Dust and dirt inside can
damage the unit. When operated in harmful ambient conditions (dust, smoke, nicotine, fog, etc.), the unit should be maintained by
qualied service personnel at regular intervals to prevent overheating and other malfunction.
NOTICE!
Power supply
Before connecting the device, ensure that the input voltage (AC outlet) matches the voltage rating of the device and that the AC
outlet is protected by a residual current circuit breaker. Failure to do so could result in damage to the device and possibly injure the
user. Unplug the device before electrical storms occur and when it is unused for long periods of time to reduce the risk of electric
shock or re.
NOTICE!
Risk of overheating
The distance between light output and the illuminated surface must be more than 1.5 m (19.7in). Provide sucient ventilation. The
ambient temperature must always be below 40 °C (104 °F).
Safety instructions
14 VP-1 FC DMX Video RGB + WW Panel
LED spotlight

NOTICE!
Possible damage due to installation of a wrong fuse
The use of dierent types of fuses can cause serious damage to the unit. Fire hazard! Only fuses of the same type may be used.
Safety instructions
VP-1 FC DMX Video RGB + WW Panel 15
LED spotlight

3 Features
The LED spotlight with variable colour temperature is particularly suitable for lighting tasks
during video shooting in reports on the road or in the studio.
Special features of the device:
nHigh CRI for large and even illumination
nControl via DMX and via buttons and display on the unit
nStand-alone operation or combined operation for complex lighting situations
nLightweight design for use on the go
nOptional operation via V-mount batteries (not included)
nIncludes barn door
For technological reasons, the light output of LEDs decreases over their lifetime. This eect
increases with higher operating temperature. You can extend the service life of the illuminants
by providing adequate ventilation and operating the LEDs with the lowest possible brightness.
Features
16 VP-1 FC DMX Video RGB + WW Panel
LED spotlight

4 Installation
Unpack and check carefully there is no transportation damage before using the unit. Keep the
equipment packaging. To fully protect the product against vibration, dust and moisture during
transportation or storage use the original packaging or your own packaging material suitable
for transport or storage, respectively.
You can install the device standing or hanging. When in use, the device must be mounted at a
solid surface or clamped to an approved truss.
Work from a stable platform whenever you install or move the device or when you perform
any kind of maintenance. Block access under the work area.
Installation
VP-1 FC DMX Video RGB + WW Panel 17
LED spotlight

WARNING!
Risk of injury caused by falling objects
Make sure that the installation complies with the standards and rules that apply
in your country. Always secure the device with a secondary safety attachment,
such as a safety cable or a safety chain.
Secure the barn door with a safety cable on the spotlight after installation. The
safety cable must run outside the barn door and must not interfere with the light
emission.
NOTICE!
Risk of overheating
The distance between light output and the illuminated surface must be more
than 1.5 m (19.7in).
Provide sucient ventilation.
The ambient temperature must always be below 40 °C (104 °F).
Installation
18 VP-1 FC DMX Video RGB + WW Panel
LED spotlight

NOTICE!
Use of stands
When mounting the device onto a stand, ensure that the stand is in a safe and
stable position and that the weight of the device does not exceed the maximum
permissible load capacity of the stand.
NOTICE!
Possible data transmission errors
For error-free operation make use of dedicated DMX cables and do not use ordi‐
nary microphone cables.
Never connect the DMX input or output to audio devices such as mixers or ampli‐
ers.
Installation
VP-1 FC DMX Video RGB + WW Panel 19
LED spotlight

Please note that this device must not be connected to a dimmer.
Installation
20 VP-1 FC DMX Video RGB + WW Panel
LED spotlight