EN DIGIPASS DP 260
2. How to activate DIGIPASS
device and how to enter and to
change the PIN-code?
At handing over of DIGIPASS device to the customer, the Bank
has assigned to it an initial PIN-code, which should be changed
1. Switch-on the device by pressing the button .
2. _ _ _ _ _ PIN will appear on the screen.
Enter the initial PIN-code, provided by the Bank.
3. _ _ _ _ _ NEW PIN will appear on the screen.
Enter the new PIN-code.
4. _ _ _ _ _ PIN CONF will appear on the screen.
choice.
5. _ _ _ _ _ NEW PIN CONF and APPLI_ will appear on the
thus enabling you to choose any of the DIGIPASS functions.
If the new PIN-code will be entered incorrectly, FAIL will appear
the PIN-code.
3. How to use DIGIPASS?
Activation of the device
1. Press .
2. Enter your PIN-code after _ _ _ _ _ PIN will appear on the
screen. Wrongly entered input of data may be corrected by
deleting the last digit by pressing , as well as switching
3.
APPLI_ on the screen. Then you may choose any of the
necessary functions.
By pressing“1”, the 8 – digit Access code will be generated, to al-
low you to open access to the internet-bank Multinet. This func-
-
cation with the Bank’s employee. You simply name the 8-digit
Access code is valid for 30 minutes from the moment of its gen-
eration.
By pressing“2”, the Authentication code will be provided to con-
By pressing “2”, you will receive prompt “1______” on the
by the system on signing of the order. After that you will receive
prompt“2______” on the screen. Enter the second generated
6-digit code. Then DIGIPASS will provide you with 8-digits code
for entering into the system.
