Vaunn Medical M881N-SICR-YYVM User manual

M881N-SICR-YYVM
Ref no: M881N-SICR-YYVM Manual V7022321
YOU WILL RECEIVE
1
2
Column Assembly
Draw Pipe
X2
Wheel
without Lock
X2
Wheel
with Lock
X1
Triangle
Knob
X2
Bolts
X1 x1
PlateSpacer
x1
Chrome
Screw
x1
Dust
Cap
Table Top (Large)
Base
YOU WILL NEED
Phillips
Screwdriver
Wrench or 5/8”
Box End Wrench
Table Top (Small)
Page 1
Lay Table Tops on Flat Surface
Scan to Watch
Assembly Video
D
O
N
O
T
R
E
M
O
V
E
Table Top (Large)
Table Top (Small)
Insert Column
Assembly
Ensure the protruding metal fits completely into the
groove (Use a soft-faced hammer where necessary).
A tight fit will ensure the tabletop stays SECURE.
Remove the triangle knob and spacer from the draw pipe.
Then insert draw pipe completely.

Ref no: M881N-SICR-YYVM Manual V7022321
6 7
4 5
Tip:
Use a long tool e.g. a screw driver to push
against draw pipe. This will avoid any
unnecessary movement of the draw pipe when
tightening the Triangle Knob.
Page 2
Note:
Tighten all bolts completely to ensure stability.
Turn the Table Upright
Insert Dust Cap
Insert Spacer
and Triangle Knob to
Draw Pipe
CLICK!
CLICK!
Wheel
without Lock
Wheel
with Lock
Bolt Holes
3

Ref no: M881N-SICR-YYVM Manual V7022321
8
D
O
N
O
T
R
E
M
O
V
E
D
O
N
O
T
R
E
M
O
V
E
D
O
N
O
T
R
E
M
O
V
E
Note:
Save the BLACK TRANSPORT SCREW for future use.
Once re-inserted into the screw hole, the black screw
will lock the table at its lowest position to allow easy
transport of the table. The height adjustment
mechanism of the table will not activate when the
black screw is inserted.
Press Lever to adjust the height of the table.
Note: Do not press too hard on Lever. This will
cause the table top to run through multiple
latching points before locking in position.
To tilt table top, loosen Triangle Knob by turning
counter-clockwise. Set to desired angle, then
turn knob clockwise to tighten. Note: The
shorter table top does not tilt at all.
IMPORTANT WARNINGS
This warranty is solely for the benefit of the original consumer purchaser. This device was built to precise standards and carefully inspected prior to shipment. Your
Vaunn Medical product is warrantied to be free of defects in materials and workmanship for a period of one year. If within such warranty period, the product proves
defective, the product will be repaired or replaced, at the option of Vaunn Medical. This warranty does not cover device failure due to owner misuse or negligence, or
normal wear and tear. This warranty does not extend to non-durable components, such as rubber accessories and wheels, which are subject to normal wear and will
require periodic replacement. For questions regarding your Vaunn Medical products, please contact our authorized dealer – Beyond Med Shop, Tel: [phone].
ONE YEAR WARRANTY
FOR INDOOR USE ONLY
ENSURE EQUAL WEIGHT DISTRIBUTION ON TABLE TOP
DO NOT OVERLOAD (MAX CAPACITY: 45 LBS)
USE ONLY AS INTENDED
DO NOT MODIFY
DO NOT USE FOR TRANSPORT
KEEP AWAY FROM OPEN FLAME
Page 3
Replace Black
Transport Screw
with Chrome Screw
ADJUST & TILT