vds SRT MINI User manual

SRM MN
06/10/15
1 - 21. APPLICATIONS
2. LED INDICATORS & CONNECTIONS
- 1 channel aereal receiver, suitable for indoor with small size.- Activation by the function used during the code memorization. PROG.PROG.PROG.1.5s1.5s3sPROG.PROG.PROG.RELEASERELEASERELEASEPRESSRECEIVERBUTTONPRESSRECEIVERBUTTONPRESS RECEIVERBUTTON AGAIN10sSAVE & EXITSAVE & EXIT LED 1FLASHWAITPRESS BUTTONPRESS CHANNELFOR VIA RADIOPROGRAMMINGONONONLED 1 ONLED 1 ONLED 2 ON OFFLED 1 OFFOFFLED 1 & 2 OFF3. TRANSMITTER MANUAL PROGRAMMATION3.1 TRANSMITTER CHANNEL PROGRAMMING FOR VIA RADIO PROGRAMMING SRM MN Instruction ManualGBPROGLED 1 - ProgrammingLED 2 - Relay / Via radio channel programming3 C1 Relay 1 common4 NC1 Normally closed5 NO1 Normally opened1 21 2POWER SUPPLY24VAC/DCAC/DC12VRELAY
COMMON
3 4 5RELAY 1 OUTPUTFLASH*Note: When enter into programming of a programming via radio channel, the relay output will be active.

SRM MN
06/10/15
2 - 23.3 MEMORY RESETSAVE & EXITPROG.1.5sPRESSPROG.10sPROG.5sWAITRELEASE# FLASHES
KEEP IT PRESSED
ONLED 1 ONOFFLED OFF3.2 TRANSMITTER VIA RADIO PROGRAMMINGMUST HAVE ATRANSMITTER RECORDEDIN A RECEIVER!10sPRESS BUTTONTRANSMITTER BRELEASEWAITPRESS CHANNELPROG. VIA RADIOBASAVE & EXITFLASHLED 1ONLED 1 ONOFFLED 1 OFFPROG FLASHFLASHFLASHFLASHFLASH
GB1.5sAAWARNING!!- Equipment installation and start-up, can only be executed by qualified personal. Power Power consumptionOutput Available codesEncryption technologyKey EncryptionDetection of errors during transmissionNumber of codesFrecuencyCertificatesSpurious emissionsSensitivityRangeTemperatureAntenna12-24v AC/DC16mA2 Relay 1A/30v2.097.152.281 MillionsHopping code64 bits2 CRC bits255433.92 or 868.35MHz ETS300-220/ETS300-683< -57dBm< -104dBm60m0 to 70º17cm / 8,5cmTECHNICAL SPECIFICATIONS