VEF TA-203 User manual

VEF TA-203
INTRODUCTION
This manual is made in order to familiarize you with your phone set. In order to get maximum benefits of this product, we suggest that
you read the User’s manual carefully before using your phone set.
FEATURES
FSK/DTMF dual system auto switch, FSK message auto-adjusts the time of the unit.
LCD displays incoming number, date, time and total incoming calls
8 kinds of ringer melody
LCD brightness adjustable
Outgoing dialed number and conversation time review and redial back.
Local area code setting.
Fast checking the incoming call by calling number and calling date & time.
On-hook pre-dial and edit dialing number.
Real-time clock display.
Hands-free dial and speak, conversation time display.
P→T switch.
Ringer H/L adjustable.
Alarm clock.
3 one touch and 10 two touch memories.
Desktop/ wall mountable.
INSTALLATION
This phone requires 3 AAA-sized 1.5V batteries. Open the battery compartment cover and insert the batteries in the right polarity, then
close the cover. When you find that LCD becomes very dark or some function is not correct, please change the batteries.
Plug line cord into jack at the rear of the telephone base, the other end of the line cord should be connected to the telephone line. Plug
coiled cord into handset modular jack. Plug the other end into the jack at the left side of the telephone. Set ringer volume according to
your personal preference. Set the P/T switch as required by your telephone exchange.
Caller ID function is available only after you apply this service to the local telecom company.
SYSTEM SET UP
SET DATE
At on-hook state, press SET, LCD will display –01234567-. Then press 1 to edit the YEAR, DATE, CLOCK, and MINUTE. The LCD will
show 2002
Y
1 M 1 D AM 00:00 Digit for 02 (represents the YEAR) will flash, press 0-9 to edit the YEAR then the 1 will flash, press 0-9
to edit the MONTH, then the 1 will flash, press 0-9 to edit the DATE then the 00: will flash, press 0-9 to edit the HOUR, then the 00 will
flash, press 0-9 to edit the MINUTE. Then finish the DATE setting. Then press SET to confirm.
SET LCD BRIGHTNESS
At on-hook state, press the SET, LCD will display –01234567-. Then press 2 to edit the LCD BRIGHTNESS, the LCD will display LCD 3-
，press UP or DOWN to select the LCD brightness you like. Then press SET to confirm.
SET AREA CODE
At on-hook state, press the SET, LCD will display –01234567-. Then press 3 LCD will displayAREA -----, and - will flash to indicate to
set AREA CODE. Press 0-9 to adjust the AREACODE number and press SET to confirm.
EXAMPLE: Set CODE 755: .7 +5 + 5 + SET
SET FLASH TIME
At on-hook state, press the SET, LCD will display –01234567-. Then press 4, LCD will display FLASH 600 ,Press UP or DOWN to
adjust the FLASH TIME, there are six kinds of flash time for your selection: 90/120/180/300/600/1000ms. Press SET to confirm.
SETALARM CLOCK
At on-hook state, press the SET, LCD will display –01234567-. Then press 5 to edit the ALARM CLOCK function. This telephone has 3
groups of morning call time setting. The LCD will display AL 123, press 1 then press * to activate setting the first Alarm Call time (press *
again to cancel the morning call). The LCD will display AL 1 00:00, press the numerical keys 0 – 9 to set the time and press the SET go
to the second ALARM clock setting. Repeat this procedure for setting second and third alarm clock and press SET to confirm. When it
comes to the time set, the telephone will sent out “BI… BI…” alarming. Be sure the out line is connected with the unit.
SET LONG DISTANCE CODE
At on-hook state, press the SET, LCD will display –01234567-. Then press 6 to edit the LONG DISTANCE CODE function. The LCD will
display L CODE 0----, input the code, press # to cancel the long distance code setting.
SET RINGER MELODY
At on-hook state, press the SET, LCD will display –01234567-. Then press 7 to edit the RINGER MELODY function. The LCD will
display RING 01-RING08 . Press UP or DOWN to select the melody.
SET PBAX CODE
At on-hook state, press the SET, LCD will display –01234567-. Then press 0 to edit the PBAX CODE function. The LCD will display 0
CODE ----, input the code, press # to cancel the PBAX code setting.
RINGER VOLUME ADJUSTMENT
Slide the ringer switch to H/L to adjust the ringer volume according to personal preference.
P/T MODE ADJUSTMENT
Slide the switch to P/T position to select PULSE or TONE dialing mode. When you dial a number in the pulse mode, you can just press *
button to switch once to tone mode.

ANSWERING CALLS
When receiving a phone call, the telephone will detect the FSK or DTMF format and display the calling number. If this is a FSK format
caller ID signal, the current date and time display will also be updated. If this is a newly coming call, the “NEW” icon will be displayed. If
the incoming call is a repeated number, the “REP” icon will be displayed. If the incoming call is a private call, the icon ---P--- will be
displayed. If the incoming call is out of area, the icon ---O--- will be displayed. If a wrong number comes in, the ---E--- will be displayed.
FROM HANDSET
1. Pick up the handset. Talk with the other end.
2. When finished, return the handset to the cradle.
SWITCH TO SPEAKERPHONE
When using handset, press SPEAKER key then return the handset to the base.
When finished, press SPEAKER key again.
From Speaker phone
1.When the unit rings, press SPEAKER key, talk to the other end.
2.When finished, press SPEAKER key again.
NOTE: To receive the Caller ID message correctly, please answer a call after the telephone rings two times.
MAKING CALLS
USING HANDSET
1. Pick up the handset, and then you will hear a dialing tone.
2. Press the desired number. The LCD will display the call duration time after 6 seconds.
3. When finished, return the handset to the cradle.
USING SPEAKER PHONE
1. Press SPEAKER key, you can hear dialing tone
2. Dial desired number. Talk to the other end.
3. When finished, press SPEAKER key again
REDIAL
If line is engaged press RD/PAUSE key for REDIAL. The telephone will dial out the telephone No. automatically.
AUTO-REDIAL
When the telephone number which You desire to call is busy on the line, the telephone will send out the busy warning. Press BACK key
one time, the telephone will dial out the telephone No. automatically and keep on dialing until connection. And the telephone will send
out the back ringing when it is connected through.
FLASH
Press FLASH key to transfer phone calls when you are using a telephone exchange (PABX). The flash time can be selected from 90ms,
120ms，180ms，300ms, 600ms and 100 0ms.
PAUSE
Press RD/PAUSE key when entering a telephone number! The letter P appears on the display. On the location where you have added a
pause of 3.6 second
HOLD
Press this HOLD button to hold the conversation. You can now talk freely without the caller hearing you. The caller will hear a digital
melody. Press the HOLD button again if you want to resume your conversation.
3 ONE TOUCH MEMORY
Adding a number to a direct memory.
Press STORE button. LCD will display INPUT - , enter the telephone number. Press the desired Direct Memory key (M1-M3).
Calling a direct memory
Press the desired memory key, and the stored number is displayed. Press the BACK key to dial out. Or just pick up the handset; press
the desired memory key, it will automatically dial out.
10 TWO TOUCH MEMORY
Adding a number to an indirect memory.
Press this STORE button. LCD will display INPUT - , enter the telephone number. Press STORE key again, press the desired
numerical key (0-9).
Calling an indirect memory
Press AUTO key, then press the desired memory key, the stored number is displayed. Press the BACK key to dial out. Or just pick up
the handset, press theAUTO key and desired numerical key, it will automatically call out.
RECEIVING THE CALLER ID NUMBER
When receiving a phone call, the telephone will detect the FSK format and display the calling number. If this is a FSK format caller ID
signal, the current date and time display will also be updated. If this is a newly coming call, the NEW icon will be displayed. If the
incoming call is a repeated number, the REP icon will be displayed. If the incoming call is a private call, the icon ---P--- will be displayed.
If the incoming call is out of area, the icon ---O--- will be displayed. If a wrong number comes in, the ---E--- will be displayed.
You can use UP or DOWN key to check the incoming call information including number, date and time, (hold UP or DOWN key over 3
second, you can check the incoming calls very fast.) and you can directly dial back with BACK key. If you call back a local number,

press BACK one time. If you call back a long distance number and the coming call is not headed with a “0” (or the long distance code
number), press BACK twice.
DIALED NUMBER CHECK
You can check the outgoing dialed numbers and the conversation time with the OUT key. If you want to dial that number again, directly
press BACK key.
PRE-DIAL FUNCTION
At on-hook state, you can key in the calling number and edit the input mistake with the DEL key. After that, press BACK to dial out.
DELETE FUNCTION
In set mode, DEL key is used to quit set.
When you use pre-dial function, DEL is used to correct the input mistake.
When you check the incoming call memories, DEL key is used to delete the unwanted memory. If you press DEL key and do not
release for more than 4 seconds, all memories will be deleted.
When you check the dialed call memories, DEL key is used to delete the unwanted memory. If you press DEL key and do not release
for more than 4 seconds, all memories will be deleted.
PARTS CHECKING LIST
User’s Manual
Base
Handset
Straight Line Cord
Coiled Cord