Veikk A30 User manual

A30
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch • Manuel d'utilisation

2
English
3 –21
Čeština
22 –40
Slovenčina
41 –59
Magyar
60 –78
Deutsch
79 –97

3
Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully
before first use and keep this user manual for future reference. Pay particular attention
to the safety instructions. If you have any questions or comments about the device,
please contact the customer line.
󲐜󲐝󲐞󲐟󲐠www.alza.co.uk/kontakt
✆[phone]
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Prague 7, www.alza.cz

4
Safety Precautions
Warning
•Do not use this product in a control system that requires a high degree of safety
and reliability.
•In such a system, this product could negatively affect other electronic devices and
could malfunction due to the effect of those devices.
•Turn the power off in areas where use of electronic devices is prohibited.
•On board an aircraft or in any other location where use of electronic devices is
prohibited, this product, if left on, could negatively affect other electronic devices.
•Do not use this product in a location frequently by little children.
•Make sure that a child does not put the pen or pen tip in his/her mouth.
•The pen tip or side switch cover could be detached and be accidentally
swallowed.
Caution
•Do not place this product on an unstable surface.
•Placing this product on an unstable or tilted surface or in a location exposed to
excessive vibrations could cause it to fall off resulting in injury.
•Do not place heavy objects on top of this product.
•Do not step or place heavy objects on this product as this could damage it.
Warning
Avoid high or low-temperature locations for storage.
Do not store this product in a location where the temperature drops below 5°C or goes
above 40°C and locations subjects to excessive temperature fluctuations. Failure to heed
this caution could result in damage to the product and its components.
Do not disassemble.
Do not disassemble or modify this product as this could expose you to heat, fire, electric
shock and injury. Disassembling the product will also void your warranty.
Do not use alcohol for cleaning.
Never use alcohol, thinner, benzene or other mineral solvents as they could discolour or
cause deterioration to the product.
Do not expose to water.
Do not place glasses or vases filled with water or other liquids near this product.
Exposure to water or liquid could damage the product.
Caution
Do not place metal objects on this product during operation.
Placing metal objects on this product during operation could cause it to malfunction or
damage it.

5
Do not strike the pen against hard objects.
Striking the pen against hard object could damage it.
Do not handle the pen is high-precision instrument. Handling it with soiled hands or
using it in locations exposed to dust or strong odors may cause to entry of foreign
matter which will result in breakdown.
Product Overview
1. LED Indicator
2. Touch Keys
3. Gesture Touch Area
4. Active Area
Pen
Note: The passive pen requires neither battery nor charging.
Pen Nib
Button 1
Button 2

6
Packaging List
A30 Pen Tablet
Battery-free Pen
Pen Pocket
USB-A to USB-C
Cable
Pen Nibs
Nib Removal
Quick Start Guide

7
Installing Driver
OS Support
Windows 11/10/8/7 (32/64 bits) / Mac OS 10.12 or later Linux OS / Chrome 88 or later.
Android 6.0 or later (Expect Samsung Android device)
Installation
For Mac OS, Windows and Linux OS computer:
1. Before installing the driver, please uninstall all tablet drivers from your computer
and keep all antivirus programs and the drawing software closed.
2. Connect the tablet to your computer before installation (Please refer to Tablet
Connection)
3. Please download the driver from www.veikk.com.
4. Click Set up.exe and follow onscreen instructions.
5. Restart your computer after installation.
For Chrome OS computer and the Android mobile phone: No need to install VEIKK driver
on the Chrome OS computer and the Android mobile phone.
Tablet Connection
For Mac OS, Windows and Linux OS computer:
1. Connect the tablet to your computer with USB cable.
2. Open the driver interface. If the product model shows at the upper left corner,
this indicates that the table has been connected successfully. You can start using
your tablet.
For Chrome OS computer:
Connect the tablet to your Chrome OS computer with the USB cable, then you can start
using your tablet.
Note: The shortcut keys of the pen and tablet can’t work on the Chrome OS computer.

8
For Android mobile phone:
1. Please connect the tablet to your mobile phone with the OTG adapter.
2. Choose the most comfortable way you like to use the tablet.
By default, the working area of the tablet is 10*6 inch, but you need to rotate the tablet
as shown in Figure 1.
Press K1 and K4 at the same time, the working area of the tablet is 3*6 inch, but you can
use the tablet in the normal direction as shown in Figure 2.
Note 1: Works in mobile phone vertical screen mode only.
Note 2: For some mobile phones, you need to enable the OTG function manually in the
phone’s settings.
Note 3: The shortcut keys of the pen and tablet can’t work on Android mobile phone.
Replacing the Nibs
When the pen nib is heavily worn, please replace the nib with the nib removal.
1. Insert the pen nib into the pen holder hole.
2. Tilt the pen so that the pen holder can fully catch the pen nib.
3. Pull out the nib.
4. Insert a new nib into the pen and push it straightly until it stops.
Figure 1
Figure 2

9
Specifications
Model
A30
Dimension
332mm x 212mm x 9mm
Working Area
10 x 6 inch
Pressure Sensitivity
8192 levels
Report Rate
290 PPS
Resolution
5080 LPI
Reading Height
10 mm
Interface
USB-C
Keys
4 Touch Keys & Gesture Touch Pad
Driver Settings
Windows
Pen

10
Pen Function Settings
You may customize the functions of pen buttons. Use the “Pen” option to program
custom keystrokes.
Current Pen Pressure
Current Pen Pressure shows the current pressure level being exerted on your table and
can be used to test pen pressure.
Click Sensitivity
You can adjust pen pressure to “Output” or “Press” sensitivity on here.

11
Mapping
Define the tablet area that will be mapped to the screen area.
Screen Mapping
All Area: the entire active area of the tablet. This is the default setting.

12
Part Area: Click Part
Then go to the next page, select one of the following three ways to define the screen
range.
Monitor1: If more than one monitor is in use and you are in extended mode, you need
to choose the related monitor on the driver interface which you are going to map to. If
your monitors are in mirror mode (All monitors display the same content), the table
maps to the entire space on each monitor and the screen cursor is displayed on each
monitor simultaneously.

13
Working Area
All Area: the entire active area of the table. This is the default setting.

14
Part Area: Click Part
Then go to the next page, select one of the following three ways to define the pen tablet
partial.

15
Enable Windows Ink Function
Microsoft Widows provide extensive support for pen input. Pen features are supported
in such as Microsoft Office, Adobe Photoshop CC, AI and so on.
Function
Customize the Touch Keys and Smart Gesture Touch
Application List: You can add or remove software by “+” or “-“

16
“+”: Click “+” to add software, you have two ways to select an application.
1. Choose from the dropdown.
2. Choose from the browser.
“-“ Click “-“ to remove the software you added before.
Hotkey
Redefine Hotkey: Click on the title of the button. A dropdown menu will appear with a
list of tool options. Choose the one you want to use.

17
Touch
Click on the title of the button. A dropdown menu will appear with a list of tool options.
Choose the one you want to use.
About Us

18
Check for updating: If you want to install the newest driver, click “Check for updating”, if
there is no response, that means the driver you installed is the newest, if you find
newest driver in the list, you just need to update.
Diagnostic Tools: Check for missing key files.
Mac
Note: Driver settings in Mac system are the same in Windows system. Users who use
Mac system can take reference to Windows system.

19
Warranty Conditions
A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you
need repair or other services during the warranty period, contact the product seller
directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for
which the claimed claim may not be recognized:
•Using the product for any purpose other than that for which the product is intended
or failing to follow the instructions for maintenance, operation, and service of the
product.
•Damage to the product by a natural disaster, the intervention of an unauthorized
person or mechanically through the fault of the buyer (e.g., during transport,
cleaning by inappropriate means, etc.).
•Natural wear and aging of consumables or components during use (such as
batteries, etc.).
•Exposure to adverse external influences, such as sunlight and other radiation or
electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage,
electrostatic discharge voltage (including lightning), faulty supply or input voltage and
inappropriate polarity of this voltage, chemical processes such as used power
supplies, etc.
•If anyone has made modifications, modifications, alterations to the design or
adaptation to change or extend the functions of the product compared to the
purchased design or use of non-original components.

20
EU Declaration of Conformity
This equipment is in compliance with the essential requirements and other relevant
provisions of Directive 2014/30/EU and Directive 2011/65/EU amended (EU) 2015/863.