Veilux SVEX-T100 User manual

Explosion-proof Camera Ver: 1.0 2016.12.20
Please read this
instruction manual
before use!
2460
Ⅱ 2G Ex db Ⅱ C T6 Gb
Ⅱ 2D Ex tb Ⅲ C T80ºC Db
EN60079
-0:2012+A11:2013, EN60079-1:2014,
EN60079
-31:2014, IEC60079-0:2011,
IEC60079
-1:2014, IEC60079-31:2013
Ex marking:
Reference
standards
Instruction Manual
Explosion-proof Camera
SVEX-T300 with Wiper
SVEX-T100 without Wiper /

Thank you for choosing VEILUX Ex products
！
Please read this Instruction Manual carefully before installation and operation of this product,
following the instructions and keep this instruction manual properly.
Copyright © 2017 VEILUX INC. All right reserved.
SVEX-T100 Without Wiper / SVEX-T300 With Wiper Explosion-proof Camera·Instruction Manual

I
The user shall not disassemble this product optionally, such
Notice
factors even adverse interference in a certain degree.
The operation of this product cannot be interfered by external 
No adverse interference in operation;
Operation of this product complies with the following requirements:
Security Assurance
promise or regulation strictly.
If any other contracts between clients and us exist, we will follow the
Thunder or other force majeure natural disasters.
Damage caused by unauthorized disassembly.
Instruction Manual.
Damage caused by improper operation that against the 
and component in the follow conditions:
SVEX-T100 Without Wiper / SVEX-T300 With Wiper Explosion-proof Camera·Instruction Manual
guarantee period but we will ask the user to pay for the cost of labor
Explosion-proof Camera, we provide free maintain service in the
For SVEX-T100 WITHOUT WIPER / SVEX-T300 WITH WIPER
Quality Guarantee
www.veilux.net
The end users can get the latest product information on our website:
form of notification, to provide the newest and most advanced product.
specifications of the product in this Instruction Manual without any
VEILUX remains the right to modify the content and technical
expressed permission of VEILUX.
modified or reproduced by any person or organization without
Instruction Manual. Any content may not be copied, transferred,
ownership of the contents (including text and images) of this
VEILUX INC. (hereinafter referenced as VEILUX). Claims copyright
Copyright Statement

II
otherwise
Explosion-proof performance may be affected.
It’s not allowed to do any modification on qualified products, 
unexpected damage of the camera;
Ensure the installation is firm and reliable, to avoid 
The internal and external grounding shall be reliable;
indicated in the nameplate;
To be sure the power supply complies with the requirement 
humidity specified in Chapter 1.6;
atmosphere pressure, ambient temperature and relative
Ensure this product is always used in environment with 
requirements in this Instruction Manual;
or seepage. Please operate the product according to the
as removal of top cover or bolts may cause leakage of water
SVEX-T100 Without Wiper / SVEX-T300 With Wiper Explosion-proof Camera·Instruction Manual

III
Please read this Instruction Manual carefully before installation and operation of this product.
The safe service period is 5 years after date of manufacture, see nameplate of the date of
manufacture.
Please read and understand associate knowledge, safety notices and cautions before put into
service.
1. Safety cautions in installation
Cut off the power supply before any maintenance or repair of the
product. DO NOT OPEN WHEN ENERGIZED!
Avoid opening of this product in environment where oil smoke,
heavy dust, high temperature or dewing may exist. These will
cause the decrease of the image definition.
Connect the cables according to the requirement indicated in the
Instruction Manual, otherwise fault may happen.
Protect the flame proof joint in maintenance; avoid any metal
fragment or other substances get access in the internal chamber.
No disassembly or modification allowed.
2. Construction Safety
The protective regulations on construction spot shall be followed
strictly.
Measurement shall be carried out immediately when any security
risks found to eliminate the risks, stop construction if necessary.
All kinds of safety facilities shall be inspected, calibrated or
repaired in the event of severe weather.
The ice, fog, rain and snow shall be removed clearly.
Alert area shall be set and a person shall be specified to protect
the area when protective casing and other safety facilities are
constructed or dismantled.
Work high above the ground may require in installation of this
product, the operating personnel shall be qualified.
3. Power supply requirements
Local electrical safety standard shall be followed in installation
and service of this product.
Convenient de-energizing device shall be adopted for emergency
cutting off.
Check if the power supply is suitable for operation before start.
SVEX-T100 Without Wiper / SVEX-T300 With Wiper Explosion-proof Camera·Instruction Manual

IV
when replacement is necessary.
manufacturer indicated components / accessories can be used
personnel, please do not dismantle or repair it by yourself. Only
This product shall be installed and repaired by authorized
the surface or even decrease the service performance.
cleaner cannot be used for camera cleaning, they may damage
away then dry the camera body. Corrosive agent, abrasive
easy to clean, some neutral detergent can be used, clear the dirt
Soft, dry cloth can be used for camera body cleaning. For dirt not 
Replace the cover when not use to protect the CCD (or COMS).
it, use soft cloth with a little alcohol to wipe the lens gently.
away the dust with a blower on the lens. If it is necessary to clean
Do not touch the CCD (or COMS) directly; a proper way is to blow 
inside.
Do not dismantle this product; there is no user serviceable part 
Operation & maintenance requirements5.
cross-sectional area shall be no less than 4mm2.
Internal and external grounding shall be reliable and the 
We suggest using this product with Lightning Protection Devices.
in transmission.
The product shall be well packaged as new product or equivalent
transmission, storage or operation.
Avoid damage caused by compressing or violent vibration in 
Avoid overheated, the product shall be well ventilated.
element.
conductive fluid, which may damage the internal electrical
The product shall be protected from any entry of water or other 
unstable lighting conditions.
environment or area with strong electromagnetic radiation or
overheated (over +60ºC), extreme cold (less than -40ºC)
temperature and humidity range. Do not locate it in wet,
Transport, operate and store this product in applicable 
CMOS).
malfunction but it does will affect the duration of the CCD (or
sunlight), which will cause too bright of the image, it’s not
Please do not focus the camera to hard light (such as lamp or 
Service condition requirements4.
for the plug, socket and joint out from devices.
Protect the power cable from trample or compressing, especially
SVEX-T100 Without Wiper / SVEX-T300 With Wiper Explosion-proof Camera·Instruction Manual

V
caused by misuse or operations do not comply with this manual. The operator or user shall be responsible for damages or losses 
disputes, please refer to our company for finally explanation.
data and the data we provide, if you have any questions or
can, but there still may be some de-tolerance between the real
We always tried to make this instruction manual as perfect as we 
distributor or customer service department @ 1-800-510-6528.
Any problem in operation of this product, please contact the 
consulting the customer service department.
You can get the latest software and description document by 
little differences after updating.
form of notification when the product updates, there may exist
specifications of the product in this Instruction Manual without any
We remain the right to modify the content and technical 
Pictures in this manual is a diagram for reference only.
Special announcement
environment.
no casually discard allowed, avoid any adversative effect to the
sources shall be delivered to the government for further treatment,
in maintenance and scrapping of the products. These pollution
and lubricant, collection and control measurement shall be taken
pollute the environment, such as PCB, electrical elements, plastic
For components of the products made by our company may 
Environmental protection6.
to avoid the camera suffering radiation of laser beam.
The CCD (or COMS) may be damaged by laser beam, it’s better
SVEX-T100 Without Wiper / SVEX-T300 With Wiper Explosion-proof Camera·Instruction Manual

VI
Ex structure instruction
We have made adequate consideration in flameproof enclosure
design of the explosion-proof camera to prevent explosive gases
getting into the inner volume, the explosion inside the enclosure
cannot cause the explosion of the external explosive gases. We
ensure the explosion-proof performance by strengthen enclosure
the strength, adjust the length and gap of the joint of associate
components and limit the maximum surface temperature.
The enclosure is able to subject to static pressure test (1.8MPa
for at least 10s) specified in EN60079-01:2014/IEC60079-1: 2014,
no leakage or deformation allowed after test.
The maximum surface temperature will no more than 80ºC in
normal operation.
Tempering glass is adopted in observation port, the tempering
glass shall pass the impact and thermal shock test.
Ingress protection level: IP68 (1.2m/45min).
Protection the flameproof surface in maintaining of this product,
otherwise the damaged flameproof surface will affect the
Explosion-proof performance.
SVEX-T100
SVEX-T100 Without Wiper / SVEX-T300 With Wiper Explosion-proof Camera·Instruction Manual
SVEX-T300

VII
Power down the product, move holding the bottom part of the
camera housing; do not hold from the sunshade, wiper or wiper base;
do not drag or toss.
When the product is POWERED: DO NOT open, move, knock or
drag this product.
SVEX-T100 Without Wiper / SVEX-T300 With Wiper Explosion-proof Camera·Instruction Manual

VIII
5. Declaration....................................................................................................................................... 10
4.3. Maintenance................................................................................................................................. 10
4.2. Storage.......................................................................................................................................... 10
4.1. Transportation .............................................................................................................................. 10
4. Transportation, storage and maintenance................................................................................... 10
3. Trouble-shooting ............................................................................................................................... 9
2.5.6. Settings of camera, IE browser and client software .............................................................. 9
2.5.5. Service status and inspection in service ................................................................................. 9
2.5.4. Inspection and examination before power on......................................................................... 9
2.5.3. Parameter setting ......................................................................Error! Bookmark not defined.
2.5.2. Cable specification ....................................................................Error! Bookmark not defined.
2.5.1. System connection..................................................................................................................... 8
2.5. Adjusting and operation ................................................................................................................ 8
2.4.1. Instruction for installation........................................................................................................... 7
2.4. On-spot installation and fixing...................................................................................................... 7
2.3.1. Support installation..................................................................................................................... 5
2.3. Preparation of supports before installation ................................................................................ 5
2.2. Cable entry ..................................................................................................................................... 5
2.1. Cautions before installation.......................................................................................................... 4
2. Installation & debugging................................................................................................................... 4
1.8. Special conditions for safe use.................................................................................................... 4
1.7. Electrical safety (in normal atmosphere).................................................................................... 3
1.6. Service condition ........................................................................................................................... 3
1.5. Electrical parameters .................................................................................................................... 3
1.4. Mechanical parameters ................................................................................................................ 2
1.3. Scope .............................................................................................................................................. 2
1.2. Characters ...................................................................................................................................... 2
1.1. Specification ................................................................................................................................... 1
1. General............................................................................................................................................... 1
Notice.......................................................................................................................................................I
Security Assurance ................................................................................................................................I
Quality Guarantee ..................................................................................................................................I
Copyright Statement ..............................................................................................................................I
Content
SVEX-T100 Without Wiper / SVEX-T300 With Wiper Explosion-proof Camera·Instruction Manual

1
Model:
Ingress Protection
Level:
IP68(1.2m/45min)
Ex marking:
2460
II2G Ex db IIC T6 Gb
II2D Ex tb IIIC T80 ºC Db
Camera type HD network/Analog
by China National Quality Supervision and Test Center for Explosion Protected Electrical
All associate technical document, drawings and samples of the camera are tested and certified
industry, aircraft industry, military industry, food processing industry and so on.
It’s applicable for petrol industry, chemical industry, wharf, harbor, non-coal mine, aerospace
2013. The compact structure, small size make it convenient for installation and maintenance.
EN60079-1: 2014, EN60079-31: 2014, IEC60079-0: 2011, IEC60079-1: 2014, IEC60079-31:
The camera is designed and manufactured according to EN60079-0:2012+A11: 2013,
purpose of monitoring the hazardous area.
be used in flammable and explosive gas or flammable dust environment, to achieve the
guarantee, the quality, performance and appearance are in leading position. The product can
adopts advanced manufacturing process, with a mature quality management system as a
(hereinafter referred to as camera) is a new generation of Explosion-proof monitoring device, it
SVEX-T100 WITH WIPER Explosion-proof Camera
1. General
SVEX-T100 Without Wiper / SVEX-T300 With Wiper Explosion-proof Camera·Instruction Manual
WITHOUT WIPER / SVEX-T300
Model：SVEX-T300A, SVEX-T300.
Company code
(100 no wiper; 300 w/wiper)
Product code
: B
S V E X - T 1 0 0 B
1.1. Specification
Apparatus (CQST), ATEX certification number:
2460
Presafe 17 ATEX 11326X.
SVEX-T300 WITH WIPER
SVEX-T100 WITHOUT WIPER /

Material:
Automatic heating(optional):
Wiper:
Weight(net):
Weight(gross):
1.4. Mechanical parameters
areas that explosive dust may exist
group IIA, IIB, IIC, T1~T6 gases, vapors and air may exists, Zone 21 and Zone 22 hazardous
This product is applicable for Zone 1 and Zone 2 hazardous areas that explosive mixture of
1.3. Scope
safer and more reliable.
brands of the video camera. The surge protection device provided with the camera will make it
This camera can work at wide voltage range and its self-adaptation function will satisfy most
role in security systems.
This camera integrated a variety of communication protocols and speed, it plays an important
1.2. Characters
2
SVEX-T100
SVEX-T100 Without Wiper / SVEX-T300 With Wiper Explosion-proof Camera·Instruction Manual
SVEX-T300: 17.5kg; SVEX-T100: 16.5kg
SVEX-T300: 16kg; SVEX-T100: 15kg
Speed: 30±10 times/min
Heating automatically below -10 ºC
Stainless steel 304, 316 or 316L
SVEX-T300

3
Voltage and current: 100~240V AC or 24V AC; Max. 1.5A
Consumption: ≤36W(excl. the heating fan)
Electrical connection: Comprehensive cable
Communication type RS-485
Control communication speed: 2400~19200bps adjustable
Control communication Protocol: PELCO-D/PELCO-P
Fast Ethernet electrical signal interface(optional): full duplex TCP/IP Protocol Ethernet
interface transmission
Video signal (optional): 1-way video output
Audio(optional): 1-way input, 1-way output
Alarm(optional) 2-way alarm input, 1-way alarm output
Address code: 0/1
1.6. Service condition
Atmosphere pressure: 80～110kPa
Ambient temperature: -40ºC～+60ºC
Relative humidity: no more than 95% (+25ºC)
1.7. Electrical safety (in normal atmosphere)
Insulation resistance: the insulation resistance between power terminal and the enclosure shall
be no less than 50 MΩ;
SVEX-T100 Without Wiper / SVEX-T300 With Wiper Explosion-proof Camera·Instruction Manual
Explosion-proof Camera
Figure 1.4.1 Dimensions of SVEX-T100 WITHOUT WIPER / SVEX-T300 WITH WIPER
1.5. Electrical parameters
SVEX-T300 WITH WIPER Explosion-proof Camera
Figure 1.4.2 Distribution of installation holes of SVEX-T100 WITHOUT WIPER /

4
available.
Since Ex product is very special, debugging with power before installation if
humidity) specified in chapter 1.6.
Please use this product in conditions (atmosphere pressure, temperature and 
The power must comply with requirements specified in 1.5.
Instruction for operation.
It’s not suggested for users to dismantle this product at will, please follow the 
Cautions in service:
Outer hexagon adjustable wrench: 300×36, 1pcs.2)
Cross screw driver: 6×150, 1pcs;1)
Other tools in installation:
washers and spring washers; 5×M6 nuts, pcs)
Wall mounting support, universal joint, optional□ (require: 9×M6×14 screws with flat6)
F type wrench, 248×16×10, optional□;5)
CoC, instruction manual (with ATEX cert.), 1pcs for each;4)
Stopping plugs, 2pcs;3)
M6 inner hexagon spanner, 1pcs;2)
SVEX-T100A or SVEX-T100B main set, 1pcs;SVEX-T1001)
Accessories in packaged product:
2.1. Cautions before installation
Installation & debugging2.
Ambient temperature: -40ºC~+60ºC.
Yield stress of the flameproof enclosure fasteners shall be no less than 450MPa;
Width of the flameproof joints are greater than values specified in EN/IEC60079-1;
Engaged length and engaged threads are greater than values in IEC/EN 60079-1;
1.8. Special conditions for safe use
between wiring terminals and the enclosure; no breakdown or flashover allowed.
terminal and the enclosure for 1min; dielectric test of 50Hz, AC500V shall be conducted
Dielectric strength: dielectric test of 50Hz, AC1500V shall be conducted between power
SVEX-T100 Without Wiper / SVEX-T300 With Wiper Explosion-proof Camera·Instruction Manual

5
2.3.1.5.
Specification of the support see Figure 2.3.1.2, 2.3.1.3 and 2.3.1.4; universal joint see Figure
bridges.
maintenance, as per Figure 2.3.1.1. The cable is connected to junction box by wire casings or
anchors or plug bolts. Junction box is always installed in positions that easy for installation and
be monitored to ensure the direction of the camera is correct; at last fasten the support with
base of the camera; after that adjust the fasteners of the universal joint based on the area to
Select installation holes in proper positions, the first step is to mount the universal joint with the
2.3.1. Support installation
be harmed.
rotation of the camera; otherwise, falling or damage may happen, even personnel safety may
shall ensure that it’s out of reach by human beings and there is no other subject may affect the
fasteners comply with associate load and anti-rust requirements. Installation of the camera
It’s the user’s responsibility to ensure the support for the camera is strong enough, and the
significantly.
We strongly suggest you select supports from VEILUX, it will ease your installation process
The debugging is done before package, only installation in the intended location is required.
2.3. Preparation of supports before installation
Follow the instruction of the cable gland for correct installation.
compound, the Ex marking shall be Ex db IIC Gb/Ex tb IIIC Db IP68 or higher protection level.
product, please replace the stopping plug with ATEX certified cable glands with sealing
There are two cable entries in the rear cover that blocked by stopping plugs in packaged
2.2. Cable entry
DO NOT OPEN WHEN EXPLOSIVE GAS OR DUST MAYBE PRESENT!
No extra load on the camera, extra load may cause malfunction or damage!
SVEX-T100 Without Wiper / SVEX-T300 With Wiper Explosion-proof Camera·Instruction Manual

6
Figure 2.3.1.1 Installation of support Figure 2.3.1.2 Dimension of support
Figure 2.3.1.3 Front view of support
Figure 2.3.1.4 Side view of support
SVEX-T100 Without Wiper / SVEX-T300 With Wiper Explosion-proof Camera·Instruction Manual

7
Figure 2.4.1 installation of camera
box to control room could be protected by metal pipes or by cable casing, see Figure 2.4.1.
connected from camera to junction box could be protected by metal pipes; cable from junction
as example: pass the reserved cable of the camera through the cable in the support, the cable
See Figure 2.3.1.2 for distribution of installations holes under the camera, take SVEX-T300A
2.4.1. Instruction for installation
locations if available.
Since Ex product is very special, adjust with power indoors before installation in the intended
2.4. On-spot installation and fixing
SVEX-T100 Without Wiper / SVEX-T300 With Wiper Explosion-proof Camera·Instruction Manual

8
Figure 2.5.1 System connection
Network model device adopts cable network or wireless network as the main network for digital
video signal transmission, it’s available for users to monitor or record the videos at any time by
network, no matter in local area network (LAN) or wide area network (WAN), such as internet.
2.5.1. System connection
2.5. Adjusting and operation
SVEX-T100 Without Wiper / SVEX-T300 With Wiper Explosion-proof Camera·Instruction Manual

9
Phenomenon
Analysis
Solution
No image
No power supply
Check the power supply
Poor connection of video signal cable Check the video signal
cable
Cannot switch to
night viewing model Strong light in optical angle/ in manual night viewing switch model
Remove the strong light
Set to auto night viewing
switch model
Unclear image Camera is in manual focus model/ dust
or stain on window
Set to auto model/clear
the window
Unstable image
Poor connection of video signal cable
Check the video signal
cable
Bad connection of signal cable Check signal cable
connection
Signal attenuation caused by long
distance
Use repeater to lengthen
the communication
distance
Incorrect address
Set according to
instruction manual of
camera
Incorrect protocol
Incorrect baud rate
Uncontrolled camera
Incorrect model of camera
Incorrect setting of control model (SW1)
3. Trouble-shooting
setting.
See camera manufacturer’s instruction manual for camera, IE browser and client software
2.5.4. Settings of camera, IE browser and client software
The camera will start self-checking automatically after power on.
2.5.3. Service status and inspection in service
correct before power on.
Check if the power and network cable are connected correctly, if the toggle switch settings are
2.5.2. Inspection and examination before power on
box, it’s available for user to monitor the scene condition.
Analog system is controlled by Explosion-proof control keyboard and Explosion-proof control
SVEX-T100 Without Wiper / SVEX-T300 With Wiper Explosion-proof Camera·Instruction Manual

10
operations do not comply with this
manual.
The operator or user shall be responsible for damages or losses caused by misuse or 
contact us for detailed information on problems not included in this instruction manual.
include all the possible problems may raise in installation and maintenance, please
We always tried to make this instruction manual as perfect as we can, but we cannot 
5. Declaration
this work.
the camera was installed in severe conditions, please contact the local distributor for
Five years after putting into service: the rubber sealing ring need to be replaced if
cables will not affect other objects during rotation.
Inspect the cables ensure the protective sheath are not damaged and the 2.
Check all the fasteners;1.
Six months after putting into service:
4.3. Maintenance
obvious vibration, temperature range: 0ºC~+40 ºC and humidity no more than 90%.
This product can be stored for one year in such environment: no corrosive substance, no
4.2. Storage
snow.
The packaged product can be delivered in all modes of transportation but without direct rain or
4.1. Transportation
4. Transportation, storage and maintenance
SVEX-T100 Without Wiper / SVEX-T300 With Wiper Explosion-proof Camera·Instruction Manual