Velleman CAMTVI7N User manual

CAMTVI7N/CAMTVI7WN/
CAMTVI8N/CAMTVI8WN
MULTI PROTOCOL CAMERA –OUTDOOR
MULTIPROTOCOL-CAMERA - GEBRUIK BUITENSHUIS
CAMÉRA MULTI PROTOCOLES –EXTÉRIEUR
CÁMARA MULTI-PROTOCOLO –EXTERIORES
MULTIPROTOKOLL-KAMERA –FÜR DEN AUßENBEREICH
KAMERA WIELOPROTOKOŁOWA – ZEWNĘTRZNA
CÂMARA MULTI-PROTOCOLO –EXTERIOR
CAMTVI7N/CAMTVI8N
CAMTVI7WN/CAMTVI8WN
HD-TVI / CVI / AHD / ANALOGUE –DOME –1080P
USER MANUAL 4
HANDLEIDING 10
MODE D'EMPLOI 16
MANUAL DEL USUARIO 22
BEDIENUNGSANLEITUNG 28
INSTRUKCJA OBSŁUGI 34
MANUAL DO UTILIZADOR 40

CAMTVI7N/CAMTVI7WN/CAMTVI8N/CAMTVI8WN
V. 01 –18/07/2016 2 ©Velleman nv
A
video
vidéo
vídeo
Video
B
power
voeding
alimentation
alimentación
Stromversorgung
zasilanie
alimentação

CAMTVI7N/CAMTVI7WN/CAMTVI8N/CAMTVI8WN
V. 01 –18/07/2016 3 ©Velleman nv
AE
BRIGHTNESS
1-20
EXPOSURE MODE
GLOBE
CENTER
BLC
FLC
GAIN
1-8
RETURN
WB
MODE
ATW
MWB
RGAIN
1-16
BGAIN
1-16
RETURN
DAY&NIGHT
MODE
AUTO
COLOR
B/W
RETURN
VIDEO SETTING
CONTRAST
SHARPNESS
COLOR GAIN
DNR
FORMATE
PAL
NTSC
WDR
ON
OFF
RETURN
LANGUAGE
ENGLISH
中文
ESPANOL
РУССКИЙ
ITALIAN
RESET
SAVE-EXIT
EXIT

CAMTVI7N/CAMTVI7WN/CAMTVI8N/CAMTVI8WN
V. 01 –18/07/2016 4 ©Velleman nv
USER MANUAL
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal
of the device after its lifecycle could harm the environment. Do
not dispose of the unit (or batteries) as unsorted municipal waste;
it should be taken to a specialized company for recycling. This
device should be returned to your distributor or to a local
recycling service. Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman! Please read the manual thoroughly before
bringing this device into service. If the device was damaged in transit, do
not install or use it and contact your dealer.
2. Safety Instructions
Keep the device away from children and unauthorised users.
Risk of electric shock when opening the cover.
DO NOT disassemble or open the cover. There are no user-
serviceable parts inside the device. Refer to an authorized dealer
for service and/or spare parts.
3. General Guidelines
Refer to the Velleman® Service and Quality Warranty on the last pages
of this manual.
Familiarise yourself with the functions of the device before actually using it.
All modifications of the device are forbidden for safety reasons. Damage
caused by user modifications to the device is not covered by the warranty.
Only use the device for its intended purpose. Using the device in an
unauthorised way will void the warranty.
Damage caused by disregard of certain guidelines in this manual is not
covered by the warranty and the dealer will not accept responsibility for
any ensuing defects or problems.
Keep this device away from extreme heat.
Protect this device from shocks and abuse. Avoid brute force when
operating the device.
DO NOT use this product to violate privacy laws or perform other illegal
activities.

CAMTVI7N/CAMTVI7WN/CAMTVI8N/CAMTVI8WN
V. 01 –18/07/2016 5 ©Velleman nv
4. Features
This HD CCTV camera is equipped with a CMOS image sensor. The
video image quality is 1080P. The video signals can be set to HD-TVI, HD-
CVI, AHD and analogue video signals. The IR-cut filter will filter the IR
light, so it cannot distort the colour image. When it gets dark, the camera
automatically switches to night mode. In night mode, the camera enables
the IR LEDs and disables the IR-cut filter.
weatherproof
with B/W night vision (IR LEDs)
1080P video signal
vandal-proof bracket
varifocal lens (CAMTVI8(W)N only)
5. Overview
Refer to the illustrations on page 2of this manual.
1
mounting plate
7
lens
2
fixation ring
8
manual focus
3
positioning ring
9
light sensor
4
manual zoom
10
cable slot
5
lens enclosure (sphere)
11
cable
6
IR night LEDs
6. Hardware installation
Refer to the illustrations on page 2 of this manual.
Choose a location for the camera, keeping following guidelines in mind:
odo not install the camera in locations where extremely high or low
temperatures or excessive vibrations may occur.
oavoid mounting the camera near high electro-magnetic fields.
odo not aim the camera at the sun or other extremely bright objects
or reflections (e.g. metal doors).
Hold the mounting plate [1] and unscrew the fixation ring [2] by
turning it counter-clockwise. Note that the lens enclosure [5] and
positioning ring [3] are also released.
Use the mounting plate [1] to determine the position of the mounting
holes. Drill the holes.
Guide the power and video cable [11] through one of the cable slots
[10] and fix the mounting plate [1] on the ceiling or wall with the four
screws.
Position the positioning ring [3] over the lens enclosure [5] onto the
mounting plate [1] and then fix the ensemble by screwing the fixation
ring [2] onto the mounting plate [1]. Make sure the fixation ring is not

CAMTVI7N/CAMTVI7WN/CAMTVI8N/CAMTVI8WN
V. 01 –18/07/2016 6 ©Velleman nv
screwed too tight to leave the option open to position the lens into the
direction of the desired field of operation.
Connect the two wires for an analogue PAL signal; leave them
unconnected for a HD 1080P TVI signal.
Connect the video connector [A] to a monitor (not incl.) or a sequential
switcher/quad splitter (not incl.) in case of multiple domes.
Connect the power connector [B] to a 12 VDC power supply (not incl.).
Set up the desired field of observation by adjusting the position of the
lens enclosure [5] in the positioning ring [3].
Manually adjust the zoom [4] and focus [8] with their screws. The
location of the screws can be determined by looking at the position of
the light sensor [9].
Tighten the fixation ring [2] to secure the camera’s position.
7. OSD Settings
There is a small joystick in the camera cable that allows you to adjust the
settings of the camera using an on-screen display (OSD).
Press the middle button to access the menu, or to
select an option.
Press the up and down buttons to move up and
down in the menu.
Press the left and right buttons to modify the menu
parameters.
In the OSD menu:
NEXT/BACK: select this option and press the middle button to go to the
next/previous page of options in the menu.
RETURN: select this option and press the middle button to return to the
previous level in the menu.
EXIT: select this option and press the middle button to leave the OSD
menu without saving the settings.
SAVE ALL: select this option and press the middle button to save all
settings.
CAMERA RESET: select this option and press the middle button to reset
the camera to the factory defaults.
The OSD menu settings are described in detail below.
Refer to the table on page 3.

CAMTVI7N/CAMTVI7WN/CAMTVI8N/CAMTVI8WN
V. 01 –18/07/2016 7 ©Velleman nv
7.1 Selecting the Video Signal
Hold the joystick button pressed for 5 seconds to select your video signal
(default signal: TVI).
AHD
CVBS
TVI
CVI
7.2 Automatic Exposure (AE)
Use this menu to set the common adjustments for video images.
7.3 White Balance (WB)
Use this menu option to define the white balance adjustment.
7.4 Day & Night
The camera can switch automatically between colour images in day
conditions and black-and-white images in night conditions. Use this function
to control the day/night behaviour of the camera.
Note: black-and-white images are much clearer and contain less noise at
low light levels.
7.5 Video Setting
Use this menu option to set the different video options.
7.6 Language
Use this function to set the language of the OSD menu.
7.7 Reset
Use this menu to reset all settings back to factory settings.

CAMTVI7N/CAMTVI7WN/CAMTVI8N/CAMTVI8WN
V. 01 –18/07/2016 8 ©Velleman nv
7.8 Save-Exit
Use this option to save your settings and to exit the menu.
7.9 Exit
Use this option to exit the menu without saving.
8. Technical specifications
IP rating...................................................................... IP66
pick-up element .............................1/2.7" CMOS image sensor
pixels ................................................... 1920 (H) x 1080 (V)
resolution..........................................................1080P video
DSP.............................................. Techpoint & HTC1080 chip
min. illumination ....................................................0.001 lux
IR-cut filter....................................................................yes
S/N ratio ...................................................> 50 dB (AGC off)
WDR.............................................................................yes
AGC .............................................................................yes
white balance .......................................................automatic
video output ................................................. BNC connection
TVI signal............................................................ 1080P
PAL video ...............960H (selectable via alarm input wires)
CVI signal............................................................ 1080P
AHD signal .......................................................... 1080P
audio............................................................................. no
power supply ........................................................... 12 VDC
operating temperature ............ -10 °C to 40 °C - RH max. 95 %
CAMTVI7(W)N
IR LEDs.......................................................................... 24
max. IR projection distance........................................... 20 m
lens.................................................................... f3.6 / F2.0
lens angle
horizontal................................................................83°
vertical ...................................................................47°
diagonal..................................................................96°
current consumption ...............100 mA (IR off), 320 mA (IR on)
dimensions .....................................................Ø 92 x 75 mm
weight .......................................................................300 g

CAMTVI7N/CAMTVI7WN/CAMTVI8N/CAMTVI8WN
V. 01 –18/07/2016 9 ©Velleman nv
CAMTVI8(W)N
IR LEDs.......................................................................... 36
max. IR projection distance........................................... 30 m
lens............................................................... f2.8 ~ 12 mm
lens angle ..........................................................104° ~ 33°
current consumption ...............130 mA (IR off), 420 mA (IR on)
dimensions ................................................. Ø 119 x 105 mm
weight .......................................................................570 g
Use this device with original accessories only. Velleman nv cannot
be held responsible in the event of damage or injury resulted from
(incorrect) use of this device. For more info concerning this product
and the latest version of this user manual, please visit our website
www.velleman.eu. The information in this manual is subject to
change without prior notice.
© COPYRIGHT NOTICE
This manual is copyrighted. The copyright to this manual is owned by
Velleman nv.
All worldwide rights reserved. No part of this manual may be copied,
reproduced, translated or reduced to any electronic medium or otherwise
without the prior written consent of the copyright holder.

CAMTVI7N/CAMTVI7WN/CAMTVI8N/CAMTVI8WN
V. 01 –18/07/2016 10 ©Velleman nv
HANDLEIDING
1. Inleiding
Aan alle ingezetenen van de Europese Unie
Belangrijke milieu-informatie betreffende dit product
Dit symbool op het toestel of de verpakking geeft aan dat, als het
na zijn levenscyclus wordt weggeworpen, dit toestel schade kan
toebrengen aan het milieu. Gooi dit toestel (en eventuele
batterijen) niet bij het gewone huishoudelijke afval; het moet bij
een gespecialiseerd bedrijf terechtkomen voor recyclage. U moet
dit toestel naar uw verdeler of naar een lokaal recyclagepunt
brengen. Respecteer de plaatselijke milieuwetgeving.
Hebt u vragen, contacteer dan de plaatselijke autoriteiten
betreffende de verwijdering.
Dank u voor uw aankoop! Lees deze handleiding grondig door voor u het
toestel in gebruik neemt. Werd het toestel beschadigd tijdens het transport,
installeer het dan niet en raadpleeg uw dealer.
2. Veiligheidsvoorschriften
Houd dit toestel uit de buurt van kinderen en onbevoegden.
Elektrocutiegevaar bij het openen van het toestel.
Demonteer of open dit toestel NOOIT. Er zijn geen onderdelen
in het toestel die door de gebruiker gerepareerd kunnen worden.
Contacteer uw verdeler voor eventuele reserveonderdelen.
3. Algemene richtlijnen
Raadpleeg de Velleman® service- en kwaliteitsgarantie achteraan deze
handleiding.
Leer eerst de functies van het toestel kennen voor u het gaat gebruiken.
Om veiligheidsredenen mag u geen wijzigingen aanbrengen aan het
toestel. Schade door wijzigingen die de gebruiker heeft aangebracht aan
het toestel valt niet onder de garantie.
Gebruik het toestel enkel waarvoor het gemaakt is. De garantie vervalt
automatisch bij ongeoorloofd gebruik.
De garantie geldt niet voor schade door het negeren van bepaalde
richtlijnen in deze handleiding en uw dealer zal de verantwoordelijkheid
afwijzen voor defecten of problemen die hier rechtstreeks verband mee
houden.
Bescherm dit toestel tegen extreme temperaturen.