Velocifero MINI MAD Plus User manual
1
Welcome to use
Thank you for choosing MINI MAD Plus electric scooter
(hereinafter referred to as electric scooter).Electric
scooter is a fashionable sports and entertainment
equipment.
Contents
1. Products and accessories.......................................02
2. Function sketch maps............................................03
3. Scooter body assembly........................................07
4. Connection of charger...........................................11
5. Learn to drive.....................................................13
6. Safety instruction..................................................15
7. Fold ........................................................24
8. Daily maintenance.................................................25
9. Type and parameters.............................................29
10. Content and name of harmful substances.............29
11. Fault code..............................................................30
12. Trade marks and legal notices................................31
13. Warranty Policy......................................................32
2
1. Products and accessories
Accessories
1.tools 2.charger
Tools Contains 5#, 4# inner hexagon wrench.
4
Operational instructions
Meter
1
2
5 6 7 8 9 1 0
3
4
11
5
①Speed / Fault code
②Electricity meter
③Odometer
④Trip meter
⑤Light indication
⑥Auto Cruise Control
⑦Bluetooth(reserved)
⑧Sport mode
⑨Normal mode
⑩ECO mode
⑪Logo
notice：
Electricity meter is divided into seven-grid display,
Electricity decreases from top to bottom in turn. When the
indicator light is only 2 grid, it is better to be ready to
charge.
6
Off-road tire Road tire
Tyres: There are two options for tyres. One is off-road tire
and the other is road tire.
7
3. Scooter body assembly
1. Open the side bracket and fix the electric scooter
standpipe.
8
2. Install the handlebar on the standpipe; Lower folding
mechanism wrench limiter.
9
3.Use the hexagon wrench in the tool kit to tighten 4
bolts.
10
4.Power on and test,Turn on the switch on the battery
before use.
11
4. Connection of charger
1. Open side stand,Open the waterproof plug of the
charging port.
12
2. Connect charger with charging port
3. After charging, Cover the waterproof plug .
If you want to take the battery home to recharge it,We
can open the footrest and take the battery
out.Then,We connect the charger to the charging port
of the battery.
Step1:Remove the controller power cord from the
13
battery.
Step2:Use the key to remove the battery from the
scooter.
Step3:Turn the switch on before charging.
Step4:Connect the charger to the charging port on the
battery and strat chanrging.
Step5:Unplug the charger after charging.
Step6:Before reinstalling the battery to the scooter and
connecting the controller, turn off the switch on the
battery, connect the power cord of the controller and
then turn on the switch, so as to avoid sparking when
connecting.
Step7:Turn on and observe meter whether the battery
is full of power.
14
5. Learn to drive
As shown in the figure: Please wear protective gear to drive
during study, as well as shoes.
1. Start-up; check battery
Capacity.
2. Stand on the pedal with
the one foot and push back
with the other.
15
3. Place one foot on the
ground and press the
accelerator gently. When the
scooter moves, place the
other foot on the pedal and
keep balance.
4. Release the throttle to
slow down slowly, and
hold the brake handle
for emergency braking.
5. As you turn, tilt your
weight slightly in the
direction you want to turn
it, and slowly turn the
handle.
16
6. Safety instruction
! Don't ride in the rain.
! Don't pass quickly. When encountering
17
unconventional pavement such as deceleration belt,
threshold, pitted pavement, etc.
! Beware of high obstacles, Such as door frames.
! Don't accelerate downhill.
18
! Don't press the throttle when implementing electric
scooter.
! Please ride away from obstacles.
19
! Please don't hang heavy objects on the handle.
! Don't put one foot on the pedal when riding.
Table of contents
Other Velocifero Scooter manuals
