Ventev M6060060P1D43699D User manual

w w w.ventev.com/infra [e-mail] 800.851.4965
Ventev’s 6 dBi Directional antenna with 4 Port DART
connector is designed to operate with Cisco 802.11AX
APs. This 2.4/5 GHz directional antenna features four dual-
band antennas in a single unit, where each port is 2.4 and
5 GHz. The antenna is a functional equivalent of Cisco's
2566P4W antenna, with the gain and beamwidths required
to deliver on user demand for high capacity connectivity.
Every Ventev antenna is RoHS compliant and is covered
by Ventev’s t wo-year TerraNet warranty program.
For more information or to purchase, contact Ventev:
800.851.4965 or [e-mail].
2.4/5GHz 6dBi Wi-Fi Directional Antenna
with 4 Port DART Connector
SPECIFICATIONS RADIATION PATTERNS
SKU: 273519
Model Number: M6060060P1D43699D
Frequency Range 2400-2500MHz I 5150 -5850MHz
Gain 6dBi
Bandw idth 100MHz 700MHz
Polarization Vertical
Horizontal beamw idth 105°/125°
Vertical beamw idth 60°/70°
V SWR ≤ 2.0
Isolation ≥20dBi
Nominal Impedance 50 Ohms
Maximum Input Pow er 20W
Connector: 4 Por t DA RT
Cable Length 36”
Dimensions 10.0” x 5.6” x 1.4”
Antenna Weight 1.2 lbs
Randome Material and Color UV ABS, White
Operating Temperature (F°) -40°~ +158°
Wind Load 60 mph
5 GHz
2.4 GHz
H Plane E Plane
H Plane E Plane

w w w.ventev.com/infra [e-mail] 800.851.4965
2.4/5GHz 6dBi Wi-Fi Directional Antenna
with 4 Port DART Connector
Mounting Bracket Information
Installation Instructions:
•Place the bracket on the back of the panel antenna. Attach the antenna to the mast.
•Use the client to test and adjust the receive signal strength (RSSI) and adjust the azimuth and elevation to
maximize the RSSI. Tighten each nut and seal the antenna connector.