Verano COMODO User manual

MANUAL INSTRUCTION

S1 - M6x20
S2 - M4x8
C1
C2
C3
S1
S2
1. C2 element screw with C1 element using S1 screws.
(Allen keys are needed).
2. C3 element slide from the top and attach to the sides
using S2 screws.
STANDARD COMPONENTS:
• Cover made of steel galvanised with zink-magnesium layer, RAL 7047 and RAL 9005 powder-coated
• Unit sides are made of tempered glass
• Coil - copper-pipe with aluminium fins water side heat exchanger,
• Air went valve,
• TRV (thermostatic valve),
• Sitting boards that is made from coated oak wood
• Connections ET3/4˝
ADDITIONAL EQUIPMENT:
• Any RAL colour of the casing
• Other wood materials and finishes concerning sitting bench convector are available on demand.

Name
Quantity
W1 1
S3 4
P1 4
N1 4
W1
S3
P1
N1
S3 - M8x50
P1 - Pad M8
N1 - Nut M8
3. W1 element put between the sides and check if the holes
are on a correct place. Secure by S3 screws and N1 nuts
using P1 pads.
420
453
453
130 L-260
L
103

Name
Quantity
C4 2
D1 2
D2 1
S4 6
S5 4
K1 4
P1 4
D1
D2
C4
S4
C5
S5
P1
K1
S4 - M8x20
S5 - Srew
K1 - Dowel
P1 - Pad M8
4. Put C4 element and check if the holes are on a correct place.
5. Adjust the D1 board and screw it from the bottom using S4 screws.
Repeat for other boards.
6. Put the bench in the final destination, secure to the floor using K1
dowels and S5 screws.
7. Perform a hydraulic connection to the ¾" pipe connections.
8. Put the C5 blanding panel.
We have tried to make this COMODO manual istallation simple and intuitive.
But if you need help - contact us.
VERANO, ul. Vetterów 7a, 20-277 Lublin, POLAND
tel. [phone], tel. [phone], fax. [phone]