Verona VPFSEE365D Series Operation instructions

THIS RANGE IS FOR RESIDENTIAL USE ONLY
ELECTRIC RANGE
for residential use only
Models: VPFSEE365D..
USERS OPERATING INSTRUCTIONS
IMPORTANT - PLEASE READ AND FOLLOW
• Before beginning, please read these instructions completely and carefully.
• Do not remove permanently a󰀩xed labels, warnings, or plates from the product. This may
void the warranty.
• Please observe all local and national codes and ordinances.
• Please ensure that this product is properly grounded.
• The installer should leave these instructions with the consumer who should retain
for local inspector’s use and for future reference.
Electrical installation must be in accordance with the National Electrical Code, ANSI/NFPA70
- latest edition and/or local codes.
IN CANADA: Electrical installation must be in accordance with the current CSA C22.1
Canadian Electrical Codes Part 1 and/or local codes.
Some models are supplied with a protective lm on steel and aluminium
parts. This lm must be removed before installing/using the appliance.
R

22
WARNING
See installation
instructions for details.
Tip-Over Hazard
Anti-tip bracket
Adjustable bracket
assembly to be xed to
the back of the range
A child or adult can tip the range and be killed.
Check installation of anti-tip device per installation
instructions.
Check engagement of anti-tip device if range
is moved per installation.
Failure to follow these instructions can result in
death or serious burns to children and adults.

33
This appliance is designed and manufactured solely for the cooking of domestic (household)
food and in not suitable for any none domestic application and therefore should not be used in a
commercial environmement.
The appliance warranty will be void if the appliance is used within a none domestic environmement
i.e. a semi commercial, commercial or communal environment.
Dear Customer,
Thank you for having purchased and given your preference to our
product.
The safety precautions and recommendations reported below are
for your own safety and that of others. They will also provide a means
by which to make full use of the features oered by your appliance.
Please preserve this booklet carefully. It may be useful in future,
either to yourself or to others in the event that doubts should arise
relating to its operation.
This appliance must be used only for the task it has explicitly been
designed for, that is for cooking foodstus. Any other form of usage
is to be considered as inappropriate and therefore dangerous.
The manufacturer declines all responsibility in the event of dama-
ge caused by improper, incorrect or illogical use of the appliance.
WARNING: This product can expose you to chemicals including
formaldehyde, which is known to the State of California to cause cancer,
and lead, which is known to the State of California to cause birth defects or other
reproductive harm. For more information go to www. P65Warnings.ca.gov.

44
GENERAL INFORMATION
WARNING!!
1. This appliance shall not be used for space heating. This
information is based on safety considerations.
2. AlI openings in the wall behind the appliance and in the floor
under the appliance shall be sealed.
3. Keep appliance area clear and free from combustible
materials, gasoline, and other flammable vapors.
4. Do not obstruct the flow of ventilation air.
5. Disconnect the electrical supply to the appliance before
servicing.
6. When removing appliance for cleaning and/or service;
A. Disconnect AC power supply.
B. Carefully remove the range by pulling outward.
CAUTION: Range is heavy; use care in handling.
7. Electrical Requirement
Electrical installation should comply with national and local
codes.
8. The misuse of oven door (e.g. stepping, sitting, or leaning on
them) can result in potential hazards and/or injuries.
9. When installing or removing the range for service, a rolling lift
jack should be used. Do not push against any of the edges of
the range in an attempt to slide it into or out of the installation.
Pushing or pulling a range (rather than using a lift jack) also
increases the possibility of bending the leg spindles or the
internal coupling connectors.
WARNING!!
ELECTRICAL GROUNDING INSTRUCTIONS
The range must be electrically grounded in accordance
with local codes or, in the absence of local codes, with the
National Electrical Code, ANSI/NFPA No. 70-latest edition,
in Canada Canadian Electrical Code. Installation should be
made by a Iicensed electrician.
FOR PERSONAL SAFETY, THIS APPLIANCE MUST BE
PROPERLY GROUNDED.
If an external electrical source is utilized, the installation must
be electrically grounded in accordance with local codes or, in
the absence of local codes, with the national Electrical Code,
ANSI/NFPA 70.
REPLACEMENT PARTS
Only authorized replacement parts may be used in performing
service on the range. Replacement parts are available from
factory authorized parts distributors. Contact the nearest parts
distributor in your area.
USER INSTRUCTIONS

55
IMPORTANT PRECAUTIONS AND RECOMMENDATIONS FOR
USE OF ELECTRICAL APPLIANCES
Use of any electrical appliance implies the necessity to follow a series of fundamental rules.
In particular:
• Never touch the appliance with wet hands or feet;
• Do not operate the appliance barefooted;
• Do not allow children or disabled people to use the appliance without your supervision.
The manufacturer cannot be held responsible for any damages caused by improper,
incorrect or unreasonable use of the appliance.
IMPORTANT PRECAUTIONS AND RECOMMENDATIONS
After having unpacked the appliance, check to ensure that it is not damaged.
In case of doubt, do not use it and consult your supplier or a professionally qualified
technician.
Packing elements (i.e. plastic bags, polystyrene foam, nails, packing straps, etc.) should not
be left around within easy reach of children, as these may cause serious injuries.
The packaging material is recyclable and is marked with the recycling symbol
.
• Do not attempt to modify the technical characteristics of the appliance as this may
become dangerous to use.
• Do not carry out cleaning or maintenance operations on the appliance without having
previously disconnected it from the electric power supply.
• After use, ensure that the knobs are in OFF position.
• Do not allow children or other incapable people to use the appliance without
supervision.
• During and after use of the range, certain parts will become very hot. Do not touch hot
parts.
• Keep children away from the range when it is in use.
• This range is supplied with a protective film on steel and aluminium parts. This film
must be removed before installing/using the appliance.
• Fire risk! Do not store flammable material in the oven, and in the storage compartment.
• Make sure that electrical cables connecting other appliances in the proximity of the
range cannot come into contact with the hob or become entrapped in the oven door.
• Do not line the oven walls with aluminium foil. Do not place shelves, broiler pan, pans
or other cooking utensils on the base of the oven chamber.
• The manufacturer declines all liability for injury to persons or damage to property
caused by incorrect or improper use of the appliance.
• To avoid any possible hazard, the appliance must be installed by qualified personnel
only. Any repairs by unqualified persons may result in electric shock or short circuit.
In order to avoid possible injuries to your body or to the appliance, do not attempt any
repairs by yourself. Such work should be carried out by qualified service personnel
only.
• Danger of burns! The oven and cooking accessories may become very hot during
operation. Make sure children are kept out of reach and warn them accordingly. To
avoid burns use kitchen clothes and gloves when handling hot parts or utensils.
• Stand away from the range when opening oven door. Hot air or steam which escapes
can cause burns to hands, face, and/or eyes.
• Never clean the range, oven and storage compartment with a high-pressure steam
cleaning device, as it may provoke a short circuit.
• This appliance is intended for use in your household. Never use the appliance for any
other purpose!
• If you should decide not to use this appliance any longer (or decide to substitute an
older model), before disposing of it, it is recommended that it be made inoperative in an
appropriate manner in accordance to health and environmental protection regulations,
ensuring in particular that all potentially hazardous parts be made harmless, especially
in relation to children who could play with old appliances.
Remove the door and the storage compartment pivoting panel before disposal to
prevent entrapment.

66
VITROCERAMIC COOKING HOB
1. Cooking zone Ø 145 mm (5” 23/32) - 1200 W
2. Cooking zone Ø 180 mm (7” 3/32) - 1700 W
3. Double cooking zone Ø 205/110 (8” 1/16 / 4” 21/64) - 2100/700 W
4. Cooking zones residual heat indicators
1
2
1
2
3
4
Fig. 1.1
WARNING - VERY IMPORTANT NOTICE
Never obstruct the slots on the backguard
8” Backguard fitted
3” Backguard fitted
features
1
Attention: Disconnect the appliance from the mains if the
ceramic hob is cracked and call the After Sales Service.

77
CONTROLS DESCRIPTION
1. Electronic programmer (left multifunction oven only)
2. Left multifunction oven switch knob
3. Left multifunction oven thermostat knob
4. Front left cooking zone (2) control knob
5. Rear left cooking zone (1) control knob
6. Central double cooking zone (3) control knob
7. Rear right cooking zone (2) control knob
8. Front right cooking zone (1) control knob
9. Right multifunction oven switch knob
10. Right multifunction oven thermostat knob
11. Right oven thermostat indicator light
12. Left oven thermostat indicator light
13. Cooking zones power indicator light
Fig. 1.2
MULTIFUNCTION TEMPERATURE MULTIFUNCTION TEMPERATURE
12 13 11
92 31 4 5 6 7 8 10
A
U
T
O
1
Please note: This appliance incorporates a safety cooling fan which you will
hear operating whenever the oven or grill are in use.
This fan may continue to run for several minutes after the appliance has been
switched o󰀨.
This fan is to reduce the external temperature of the appliance and cool the
internal components.

88
Fig. 2.1
fig. 2.2a
fig. 2.2b
FRONT RIGHT AND REAR LEFT ZONE
FRONT LEFT AND REAR RIGHT ZONE
fig. 2.5
CENTRAL ZONE
2 heating element ON
CENTRAL ZONE
Central heating element ON
Fig. 2.3
fig. 2.4
2how to use the vitroceramic hob
VITROCERAMIC HOB
The ceramic surface of the hob allows a fast transmission of heat in the vertical direction,
from the heating elements underneath the ceramic glass to the pans set on it.
The heat does not spread in a horizontal direction, so that the glass stays “cool” at only
a few centimeters from the cooking plate.
The 5 cooking zones are shown by painted disks on the ceramic surface.
IMPORTANT NOTE:
The heating elements incorporate a thermolimiter that switches the element ON/OFF
during all settings to protect the ceramic glass from overheating.
The use of incorrect pans and/or wrong pan positioning will cause the temperature limiter
to operate more frequently, resulting in a reduction of cooking performance.
SINGLE COOKING ZONES
Incorporating the heating element (g. 2.2a or 2.2b) you can control and light up by
selecting from the 12 positions on the control knob (g. 2.1).
The heat intensity can be regulated continuously from “OFF” to “12” (max).
VERY IMPORTANT: TO SWITCH ON, ALWAYS LIGHTLY PRESS THE CONTROL
KNOB THEN TURN IT.
Check that the hob is clean and then switch on by press and turning the control knob.
DOUBLE COOKING ZONE
Incorporating 2 heating elements you can control and light up together or separately by
turning left or right the 6 positions control knob (g. 2.3).
The heat intensity can be regulated continuously from “1” to “6” (max).
VERY IMPORTANT: TO SWITCH ON, ALWAYS LIGHTLY PRESS THE CONTROL
KNOB THEN TURN IT.
SWITCH ON THE SMALL CENTRAL ZONE (g. 2.4)
Press and turn in counterclockwise direction the control knob from “1” to “6” (max).
SWITCH ON THE ALL ZONE (g. 2.5)
Press and turn in clockwise direction the control knob from “1” to “6” (max).

99
MULTIFUNCTION TEMPERATURE MULTIFUNCTION TEMPERATURE
A
U
T
O
fig. 2.6a
2
Make sure that the handles of
cookware do not stick out over the
edge of the range, to avoid them
being knocked over by accident.
This also makes it more difficult
for children to reach the cooking
vessels.
HINTS FOR SAFE USE OF THE VITROCERAMIC HOB
• Before switching on, check which knob controls the required cooking zone. You are
advised to place the saucepan on the hob before switching on and to take it o󰀨 after
switching o󰀨.
• To switch on, always lightly press the control knob then turn it.
• Use saucepans with an even at bottom (be careful of cast iron saucepans). Uneven
bottoms can scratch the pyroceram surface. Check that the bottom is clean and dry.
• The diameter of the pan should match that of the cooking zone (or be slightly bigger)
to make the most of the energy.
• Pots with aluminium bottoms may leave silver streaks or spots on the hob.
• Do not leave wet or damp lids on the hob.
• Do not use the top if the surface is broken or damaged.
• If you note a crack in the cooktop, switch the appliance o󰀨 immediately and
call the After-Sales Service.
• Do not bend over the cooking zones when they are on.
• Do not leave aluminium foil, greaseproof paper etc. or plastic on the hob when it is
hot.
• Remember that the cooking zones stay hot for quite a long time (approx. 30 min.)
after they have been switched o󰀨.
• Scrupulously follow the cleaning instructions.
• Do not drop heavy or sharp objects on the glass ceramic cooktop.
• Never cook the food directly on the glass ceramic cooktop, but in special pans or
containers.
COOKING ZONES POWER INDICATOR LIGHT(g. 2.6)
When the ceramic hob is working, the “ON” pilot light in the control panel will be on (g.
2.6a).
COOKING ZONES RESIDUAL HEAT INDICATORS
IMPORTANT
When the temperature of a cooking zone is above 140 °F (60 °C), the relevant “HOT
SURFACE” warning light in the vitroceramic hob (g. 2.6b) will come on to indicate that
the zone is hot.
This light will stay on even after the cooking zone has been switched o󰀨 to indicate that
the zone is still hot.
The residual heat persists for some time after the cooking zone has been switched o󰀨.
During this time avoid touching the hob and take particular care if there are
children nearby.
The light will go out automatically when the cooking zone temperature drops below 140
°F (60 °C).
Fig. 2.7
Fig. 2.6b

1010
USINGTHEOVENS FOR THEFIRST TIME (LEFT and RIGHT OVEN)
- Put in the shelf and the tray.
- Switch the oven on empty (on a cooking function) at maximum power for about 2 hours
to remove traces of grease and smells from the components.
- When the oven has cooled down and unplugging the range, clean the inside of the oven
with a cloth soaked in water and neutral detergent and dry it perfectly.
Attention: the range becomes
very hot during operation.
Attention: the oven door becomes
very hot during operation.
Keep children away.
WARNING:
The door is hot, use the handle.
GENERAL FEATURES (LEFT and RIGHT OVEN)
As its name indicates, this is an oven that presents particular features from an
operational point of view.
In fact, it is possible to insert 7 different programs to satisfy every cooking need.
The 7 positions, thermostatically controlled, are obtained by 4 heating elements which
are:
LEFT OVEN
- Lower heating element
- Upper heating element
- Broil heating element
- Circular heating element
OPERATING PRINCIPLES (LEFT and RIGHT OVEN)
Heating and cooking in the multifunction oven takes place as follows:
• by normal convection - BAKE
The heat is produced by the upper and lower heating elements.
• by forced convection - FAN OVEN
The heat produced by the circular element is distributed throughout the oven by the
fan.
• by semi-forced convection - CONV.BAKE
The heat produced by the upper and lower heating elements is distributed throughout
the oven by the fan.
• by radiation - BROIL
The heat is radiated by the infra red broil element.
• by radiation and fan - CONV.BROIL
The radiated heat from the infra red broil element is distributed throughout the oven by
the fan.
• by double radiation - DUAL BROIL
The heat is radiated by the infra red broil element and the upper heating element.
• by ventilation - DEFROST
The food is defrosted by using the fan only function without heat.
VERY IMPORTANT
The oven shall be used always
with the door closed.
Do not use
Broiling level
Oven cooking level
Oven cooking level
1st STEP
2nd STEP
3rd STEP
4th STEP
1st STEP Do not use
2nd STEP Broiling level
Oven cooking level
Oven cooking level
3rd STEP
4th STEP
RIGHT OVEN
- Lower heating element
- Upper heating element
- Broil heating element
- Circular heating element
Fig. 3.1a Fig. 3.1b
3how to use the multifunction electric oven

1111
THERMOSTAT KNOB (LEFT and RIGHT OVEN) (fig. 3.2a - 32b)
To turn on the heating elements of the oven, set the switch knob on the desired program
and the thermostat knob onto the desired temperature.
To set the temperature, it is necessary to make the chosen number, printed on the knob,
to match with the control panel indicator.
The elements will turn ON or OFF automatically according to the energy need which is
determined by the thermostat.
The indicator light will cycle on and off during cooking.
Fig. 3.2a
Fig. 3.3
OVEN LIGHT (this is not a cooking function)
Turning the knob to this position, only the oven lamp lights up.
The lamp is always on in all the cooking functions.
DEFROSTING FROZEN FOODS (this is not a cooking function)
Only the fan and the oven lamp switch on. To be used with the thermostat knob on
because the other positions have no effect.
Defrosting takes place by fan, without heating.
Recommended for:
To rapidly defrost frozen foods; 2.2 lbs (1 kg) requires about one hour.
The defrosting times vary according to the quantity and type of foods to be defrosted.
TRADITIONAL CONVECTION COOKING
The upper and lower heating elements switch on.
The heat is diffused by natural convection and the temperature must be set between
120 °F (50 °C) and 480 °F (250 °C) via the thermostat knob.
Recommended for:
For foods which require the same cooking temperature both internally and externally,
i. e. roasts, spare ribs, etc.
FUNCTION SELECTOR KNOB (LEFT and
RIGHT OVEN) (fig. 3.3)
VERY IMPORTANT: ALWAYS LIGHTLY PRESS THE
CONTROL KNOB WHEN TURNING THE FUNCTION
KNOB FROM THE OFF POSITION
(fig. 3.4) .
Rotate the knob clockwise to set the oven to one of the
following functions:
Fig. 3.2b
LEFT OVEN RIGHT OVEN
1
2
Fig. 3.4
3

1212
COOKING WITH DOUBLE BROIL
The infrared and the top heating elements switch on.
The heat is diffused by radiation. The temperature can be set between 120 °F (50 °C)
and 480 °F (250 °C) via the thermostat knob.
For correct use see the “BROILING & DOUBLE BROIL” section.
Recommended for:
Intense broiling action for cooking with the broiler; browning, crisping, toasting, etc.
BROILING
The infrared heating element switches on.
The heat is diffused by radiation. The temperature can be set between 120 °F (50 °C)
and 480 °F (250 °C) via the thermostat knob.
For correct use see the “BROILING & DOUBLE BROIL” section.
Recommended for:
Intense broiling action for cooking with the broiler; browning, crisping, toasting, etc.
VENTILATED BROILING
The infrared heating element and the fan switch on. The heat is mainly diffused by
radiation and the fan distributes it in the whole oven.
The temperature can be set between 120 °F (50 °C) and 480 °F (250 °C) via the
thermostat knob.
For correct use see the “VENTILATED BROILING” section.
Recommended for:
For grill cooking when a fast outside browning is necessary to keep the juices in, i. e. veal
steak, steak, hamburger,
etc.
CONVECTION COOKING WITH VENTILATION
The upper and lower heating elements and the fan turn on.
The heat is dispersed by forced convection and the temperature can be regulated to
between 120 °F (50 °C) and 480 °F (250 °C) via the thermostat knob.
Recommended for:
For foods of large volume and quantity which require the same internal and external
degree of cooking; for ie: rolled roasts, turkey, legs, cakes, etc.
VENTILATED COOKING
The circular element and fan come on.
The heat is dispersed by forced convection and the temperature can be regulated
to between 120 °F (50 °C) and 480 °F (250 °C) via the thermostat knob. The oven
does not require preheating.
Recommended for:
Food which has to be well-cooked outside and soft or rosy inside, for example lasagne,
lamb, roast beef, whole fish etc.
3

1313
COOKING DIFFERENT DISHES AT THE SAME TIME
The MULTIFUNCTION oven at positions or of the function selector
can cook various different foods at the same time. Fish, cakes and meat can be cooked
together without the smells and flavours mixing.
The only precautions required are the following:
– The cooking temperatures must be as close as possible with a maximum difference of
70-80 °F (20-25 °C) between the different foods.
– Different dishes must be placed in the oven at different times according to the cooking
time required for each one. This type of cooking obviously provides a considerable
saving on time and energy.
COOKING ADVICE (LEFT and RIGHT OVEN)
STERILIZATION
Sterilization of foods to be conserved, in full and hermetically sealed jars, is done in the
following way:
a. Turn the switch to position or .
b. Set the thermostat knob to position 350 °F (175 °C) and preheat the oven.
c. Fill the grill pan with hot water.
d. Set the jars into the grill pan making sure they do not touch each other and the door
and set the thermostat knob to position 260 °F (130 °C).
When sterilization has begun, that is, when the contents of the jars start to bubble, turn
off the oven and let cool.
VENTILATED BROILING
Ventilated broiling may be done by selecting with the function selector knob;
the hot air completely envelops the food that is to be cooked.
Introduce the food to be cooked, positioning the grill pan as close to the infra-red element
as possible.
Close the door and let the oven operate until broiling is done.
Adding a few dabs of butter before the end of the cooking time gives the golden “au
gratin” effect.
Broiling with the oven door closed.
Important: Use always suitable protective gloves when inserting/removing the
broiling pan from the oven (see next pages).
It is advisable to handle
the oven accessories
using oven gloves.
WARNING
VERY IMPORTANT
WARNING!!
REGENERATION
Turn the switch to position or and set the temperature to 300 °F
(150 °C).
Bread becomes fragrant again if wet with a few drops of water and put into the oven for
about 10 minutes.
ROASTING
To obtain classical roasting, it is necessary to remember:
– the pre-set temperature should be maintained
– that the cooking time depends on the quantity and the type of foods.
3

1414
Do not use
Broiling level
Oven cooking level
Oven cooking level
1st STEP
2nd STEP
3rd STEP
4th STEP
BROILING & DOUBLE BROIL (LEFT OVEN)
Very important: the broil or double broil must always be
used with the oven door closed.
- Position the shelf on the second level from the top (fig. 3.5).
- Turn on the broil or double broil, as explained in the preceding
paragraphs and let the oven preheat for about 5 minutes with
the door closed.
- Place the food to be cooked above the broiling pan.
- Introduce the broiling pan (fig. 3.6) in the oven. The broiling
pan should be placed above the shelf and it should be centered
with the broil element (fig. 3.5).
Do not broil without using the broiling pan.
Important: Use always suitable protective gloves when
inserting/removing the broiling pan, shelves, pans or other
cooking utensils from the oven.
Fig. 3.5
Fig. 3.6
LEFT OVEN
WRONG
CORRECT
Fig. 3.7
Fig. 3.8
3

1515
1st STEP Do not use
2nd STEP Broiling level
Oven cooking level
Oven cooking level
3rd STEP
4th STEP
Fig. 3.10
BROILING & DOUBLE BROIL (RIGHT OVEN)
Very important: the broil or double broil must always be
used with the oven door closed.
- Turn on the broil or double broil, as explained in the preceding
paragraphs and let the oven preheat for about 5 minutes with
the door closed.
- Place the food to be cooked above the grill-pan grid.
- Introduce the grill-pan (tray + grid) (fig. 3.10) in the oven and
insert it on the second level from the top (fig. 3.9).
Do not broil without using the grill pan.
Important: Use always suitable protective gloves when
inserting/removing the grill-pan, shelves, pans or other
cooking utensils from the oven. WRONG
CORRECT
Fig. 3.11
Fig. 3.12
RIGHT SMALL OVEN
REAR
Small edge FRONT
Big edge
Fig. 3.9
3

1616
4how to use the electronic programmer
Fig. 4.1
Fig. 4.2
Fig. 4.3
Description of the illuminated symbols:
AUTO flashing - Programmer in automatic position but not programmed
AUTO always lighted - Programmer in automatic position with programme inserted.
Automatic cooking taking place or oven in manual mode.
Timer in operation
and AUTO - flashing - Programme error.
(The time of day lies between the calculated cooking start and end time).
Note: Select a function by the respective button and, in 5 seconds, set the required time
with the / buttons (“one-hand” operation).
A power cut zeroes the clock and cancels the set programmes.
The electronic programmer is a device which groups together the following functions:
• 12 hours clock with illuminated display
• Timer (up to 23 hours and 59 minutes)
• Program for automatic oven cooking
• Program for semi-automatic oven cooking
Description of the buttons:
Timer
Cooking time
End of cooking time
Manual position and cancellation of the inserted cooking programme
Advancement of the numbers of all programs
Turning back of the numbers of all programs and changing the frequency of the
audible signal.
ELECTRONIC CLOCK (fig. 4.2)
The programmer is equipped with an electronic clock with lighted numbers which indi-
cate hours and minutes.
Upon immediate connection of the oven or after a blackout, “12:00” will flash on the
programmer panel.
To set the hour it is necessary to push the button and then the or button
until you have set the exact hour (fig. 4.2).
Alternatively, simultaneously push the two buttons and then the or
button.
Note: Setting the clock deletes any programme.
NORMAL COOKING WITHOUT THE USE OF THE
PROGRAMMER
To manually use the oven, that is, without the aid of the programmer, it is necessary to
cancel the flashing AUTO by pushing the button (AUTO will be switched off and the
symbol will go on - Fig. 4.3).
Attention: If the AUTO is not flashing (which means a cooking programme has already
been inserted), by pushing the button you have cancelled the programme and
switched to manual.
The oven shall be switched off manually.

1717
4
Fig. 4.4
Fig. 4.5
Fig. 4.6
ELECTRONIC TIMER
The timer programme consists only of a buzzer which may be set for a maximum period
of 23 hours and 59 minutes.
If the
AUTO is flashing push the button.
To set the time, push the button and the or until you obtain the desired
time (fig. 4.4).
Having finished the setting, the normal time will appear on the panel and the symbol
will appear.
The countdown will start immediately and may be seen at any moment on the panel by
simply pressing the button .
At the end of the time, the symbol will be switched off and an intermittent buzzer will
go off; this can be stopped by pressing any one of the buttons (not or ).
If the oven is switched on, you must switch off manually.
SETTING THE FREQUENCY OF THE AUDIBLE SIGNAL
By pressing the button you can choose from three variations.
AUTOMATIC OVEN COOKING (LEFT MULTIFUNCTION OVEN
ONLY)
To cook food automatically in the oven, it is necessary to:
1. Set the length of the cooking time
2. Set the end of the cooking time
3. Set the temperature and the oven cooking programme.
These operations are done in the following way:
1. Set the length of the cooking time by pushing the button and the button to
advance, or to go back if you have passed the desired time (fig. 4.5).
The AUTO and the symbol will be on.
2. Set the end of the cooking time by pressing the button (the cooking time already
added to the clock time will appear), and the button (fig. 4.6); if you pass the
desired time you may get back by pushing the button.
After this setting, the symbol will go off. If after this setting, the AUTO flashes on
the panel and a buzzer goes off, it means there was an error in the programming.
In this case, modify the end of cooking time or the cooking time itself by following the
above instructions again.
3. Set the temperature and the cooking programme by using the switch and thermostat
knobs of the oven (see specific chapters).
Now the oven is programmed and every thing will work automatically, that is the oven
will turn on at the right moment to end the cooking at the established time.
During cooking, the symbol remains on.
By pushing the button you can see the time that remains until the end of cooking.
At the end of the cooking time the oven will turn off automatically, the symbol will
turn off, AUTO will flash and a buz zer will sound, which can be turned off by pushing
any of the but tons (not or ).
Turn the switch and thermostat knobs to zero and put the programmer onto “manual” by
pressing the button.
Attention: A power cut makes the clock go to zero and cancels the set programmes.
After a powercut, “12:00” will flash on the panel.
The cooking program may be cancelled at any time by pushing .
In this case the oven shall be switched off manually.

1818
SEMI-AUTOMATIC OVEN COOKING (LEFT MULTIFUNCTION
OVEN ONLY)
This is used to automatically switch off the oven after the desired cooking time has
elapsed.
There are two ways to set your oven:
1. Set the length of the cooking time by pushing the button and the button to
advance, or to go backwards if you have passed the desired time (fig. 4.7).
or
2.
Set the end of the cooking time by pushing the button and the button to
advance, or
to go backwards if you have passed the desired time (fig. 4.8).
AUTO and the symbol will be on.
Then set the temperature and the cooking programme using the oven switch and
thermostat knobs (see specific chapters).
The oven is switched on and it will be switched off automatically at the end of the
desired time.
During cooking, the symbol remains on and by pressing the button you can
see the time that remains till the end of the cooking.
At the end of cooking, the oven and the symbol will turn off, the AUTO will flash and
a buzzer will sound; that can be stopped by pushing any of the buttons (not or ).
Turn the switch and thermostat knobs to zero and put the programmer onto “manual” by
pressing the button.
Attention: A power cut makes the clock go to zero and cancels the set programmes.
After a powercut, “12:00” will flash on the panel.
The cooking program may be cancelled at any time by pushing .
In this case the oven shall be switched off manually.
4
Fig. 4.7
Fig. 4.8

1919
Do not use steam jet cleaners
because the humidity could
infiltrate into the appliance making
it dangerous.
Before any operation of maintenance
disconnect the appliance from the
electrical mains supply.
WARNING
VERY IMPORTANT
GENERAL RECOMANDATION
• Important: Before any operation of cleaning and maintenance disconnect the
appliance from the electrical supply.
• It is advisable to clean when the appliance is cold and especially for cleaning the
enamelled parts.
• Avoid leaving alkaline or acidic substances (lemon juice, vinegar, etc.) on the
surfaces.
• Avoid using cleaning products with a chlorine or acidic base.
IMPORTANT: The use of suitable protective clothing/gloves is recommended when
cleaning and maintaining the appliance.
WARNING
When correctly installed, your product meets all safety requirements laid down
for this type of product category. However special care should be taken around
the rear or the underneath of the appliance as these areas are not designed or
intended to be touched and may contain sharp or rough edges, that may cause
injury.
ENAMELLED PARTS
• All the enamelled parts must be cleaned with a sponge and soapy water or other
non-abrasive products.
• Dry preferably with a microfibre or soft cloth.
• Acidic substances like lemon juice, tomato sauce, vinegar etc. can damage the
enamel if left too long.
PAINTED PARTS AND SILK-SCREEN PRINTED SURFACES
• Clean using an appropriate product. Always dry thoroughly.
IMPORTANT: these parts must be cleaned very carefully to avoid scratching and
abrasion. You are advised to use a soft cloth and neutral soap.
STAINLESS STEEL ELEMENTS
• Stainless steel parts must be rinsed with water and dried with a soft and clean
cloth.
• For difficult dirt, use a specific non-abrasive product available commercially or a
little hot vinegar.
INSIDE OF OVEN
The oven should always be cleaned after use when it has cooled down.
The cavity should be cleaned using a mild detergent solution and warm water.
Suitable proprietary chemical cleaners may be used after first consulting with the
manufacturers recommendations and testing a small sample of the oven cavity.
Abrasive cleaning agents or scouring pads/cloths should not be used on the cavity
surface.
NOTE: The manufacturers of this appliance will accept no responsibility for damage
caused by chemical or abrasive cleaning.
Let the oven cool down and pay special attention no to touch the hot heating
elements inside the oven cavity.
5
cleaning and maintenance

2020
Fig. 5.1
VITROCERAMIC SURFACE
Before cleaning the top, make sure that it is switched off.
Remove any encrustation using a special scraper which can be bought (fig. 5.1).
Remove dust using a damp cloth.
Detergents can be used as long as they are not abrasive or corrosive.
All residues of detergent must be eliminated with a damp cloth.
Keep all objects that could be melted by the heat away from the top: plastic objects,
aluminium foil, sugar or sugary products.
If an object melts on the top, remove immediately (while the top is still hot) using a
special scraper to avoid permanent damage to the pyroceram surface.
Avoid using knives and pointed objects as they could damage the surface of the top.
Also avoid using abrasive sponges or wire wool which can permanently scratch the
pyroceram surface.
ATTENTION: MOST IMPORTANT!
If cleaning the glass ceramic hob using a special scraper tool take extra care to
avoid damaging to the seal at the edges of the glass ceramic surface.
5