
Step6
Hook ratchet buckle strap to front
of HPS as shown below and ghten
unl res are snug to wheel stops.
Step5
Drive HPS up ramps onto carrier
unl it hits the wheel stops. Hook
cam buckle strap to rear of HPS as
shown and pull ght.
Step4
Place wheel stops in posion as
shown for HPS.
Step3
Aach strap with ratchet buckle to
the e down loops on the driver
side of carrier.
Step2
Aach strap with the cam buckle to
passenger side of carrier. Open the
threaded connector links and aach
one each to the e down loops that
are welded to the hinge bracket.
Step1
Locate center of back edge of sulky
deck. Measure in (forward) 3
/4” and
drill a 1
/2” or 5
/8” hole on the HPS
deck.
SECURINGSTRAPSTOTHECARRIER HPSTIE-DOWNSTRAPINSTRUCTIONS
FormoreinformationonyourVersaHaul,pleasevisitwww.versahaul.com Problems?Questions?Callusat(888)818-9915
CAUTION!!!
NEVER TRANSPORT MACHINE WITHOUT SECURING WITH BOTH STRAPS.