VersaLogic Bengal VL-EPMe-30 Quick user guide

Hardware
Reference
Manual
DOC. REV. 01 MAR 2016
Bengal
(VL-EPMe-30)
Intel®Atom™-based Single Board
Computer with Dual Ethernet,
Video, USB, SATA, Serial I/O,
Digital I/O, Trusted Platform
Module security, Counter/Timers,
Mini PCIe, mSATA, SPX, and
PCIe/104™ OneBank™ Interface

Bengal (VL-EPMe-30) Reference Manual ii
WWW.VERSALOGIC.COM
12100 SW Tualatin Road
Tualatin, OR 97062-7341
[phone]
Fax [phone]
Copyright © 2016 VersaLogic Corp. All rights reserved.
Notice:
Although every effort has been made to ensure this document is error-free, VersaLogic makes no
representations or warranties with respect to this product and specifically disclaims any implied warranties
of merchantability or fitness for any particular purpose.
VersaLogic reserves the right to revise this product and associated documentation at any time without
obligation to notify anyone of such changes.
†Other names and brands may be claimed as the property of others.

Bengal (VL-EPMe-30) Reference Manual iii
Product Release Notes
Rev 3.00

Replaced “Linux” with “Windows” in the Integrator’s Note on page 7.
Rev 2.02
Added ambient temperature requirements to .Thermal Considerations chapter
Added information about VL-CBR-0203 external battery module on page 26
Rev 2.01
Corrected dimensions in Figure 4.
Added Table 10, Figure 14, Figure 15, Figure 16.
Rev 2.00
Production release for the Rev 2.0 board.
VGA connector replaced with a more durable design.
Miscellaneous BIOS updates.
Rev 1.00
Pre-production release for the Rev 1.0 board
Support Page
The Bengal Support Page contains additional information and resources for this product including:
Operating system information and software drivers
Data sheets and manufacturers’ links for chips used in this product
BIOS information and upgrades
VersaTech KnowledgeBase
The VersaTech KnowledgeBase contains useful technical information about VersaLogic products, along
with product advisories.
Customer Support
If you are unable to solve a problem after reading this manual, visiting the product support page, or
searching the KnowledgeBase, contact VersaLogic Technical Support at [phone]. VersaLogic
support engineers are also available via e-mail at [e-mail].
Repair Service
If your product requires service, you must obtain a Returned Material Authorization (RMA) number by
calling 503-747-2261. Be ready to provide the following information:
Your name, the name of your company, your phone number, and e-mail address
The name of a technician or engineer that can be contacted if any questions arise
The quantity of items being returned
The model and serial number (barcode) of each item
A detailed description of the problem
Steps you have taken to resolve or recreate the problem
The return shipping address
Warranty Repair All parts and labor charges are covered, including return shipping charges for
UPS Ground delivery to United States addresses.
Non-warranty Repair All approved non-warranty repairs are subject to diagnosis and labor charges,
parts charges and return shipping fees. Specify the shipping method you
prefer and provide a purchase order number for invoicing the repair.

Note: Mark the RMA number clearly on the outside of the box before returning.

Bengal (VL-EPMe-30) Reference Manual iv
KNOWN ISSUES
Hardware
The PCIe Minicard and the two PCIe Express ports on the PCIe/104†OneBank†connector are
connected to an on-board PCIe Gen2 Switch (a PLX PEX 8605). Certain older, non-compliant
Gen 1 devices will not link up properly with this switch (such as the Startech MPEXSATA221
PCIe-to-SATA bridge using a Silicon Image Sil3132 bridge).
Holding the reset button in when powering on the board prevents booting and requires a re-power.
Make sure the reset button is not being asserted low when powering on the board.
If the +5 V input voltage is low (below +5 V) and the wires to the power supply are long (greater
than 12 inches) or too low of a gauge (less than 16 AWG) the board may take longer to power on
due to in-rush current causing a droop on the + 5 V power at the power connector input. This
droop in the +5 V power causes the board to switch the regulators off and then back on again.
Typically, this results in only a short delay (less than 1 second). Users should measure the +5 V
power at the connector with their particular power delivery system to see if the voltage at that point
ever drops below about +4.75 V when power is applied.
BIOS
S3 wake using power button may require keyboard/mouse activity to turn on the display.
The first display port (J3) can also support HDMI (it is a DP++ port). To support HDMI there are
two options:
Use an active DP-to-HDMI adapter
Use a passive DP-to-HDMI adapter and request a custom BIOS from VersaLogic.
Legacy USB support is not available in xHCI (USB 3.0) mode. Non-UEFI pre-OS and installation
environments may require EHCI (USB 2.0) mode for USB keyboard functionality.
Operating Systems
Driver support (via VersaAPI) for SPX-5 module and I2C PWM output are not yet available.

Bengal (VL-EPMe-30) Reference Manual v
Contents
Introduction ...................................................................................................................1
Description..........................................................................................................................1
Features and Construction.....................................................................................1
Technical Specifications.....................................................................................................3
Thermal Considerations......................................................................................................3
Block Diagram....................................................................................................................4
Cautions..............................................................................................................................5
Electrostatic Discharge..........................................................................................5
Handling Care........................................................................................................5
Earth Ground Requirement....................................................................................5
Battery Usage.........................................................................................................5
Configuration and Setup...............................................................................................6
Initial Configuration ...........................................................................................................6
Basic Setup .........................................................................................................................6
BIOS Setup Utility.............................................................................................................. 7
Operating System Installation............................................................................................. 7
Physical Layout.............................................................................................................8
Dimensions and Mounting..................................................................................................8
Bengal Dimensions................................................................................................8
VL-CBR-5015 Dimensions ...................................................................................9
Hardware Assembly............................................................................................... 9
External Connectors .........................................................................................................10
Bengal Connector Locations – Top Side.............................................................10
Bengal Connector Locations – Bottom Side .......................................................11
Bengal Connector Functions and Interface Cables..............................................12
VL-CBR-5015 Connector Locations...................................................................13
VL-CBR-5015 Connector Functions...................................................................14
VL-CBR-2004B Dimensions and Connectors.....................................................15
Jumper Blocks ..................................................................................................................16
Configuration Switches ....................................................................................................17
System Features..........................................................................................................18
Power Supply....................................................................................................................18
Power Connectors................................................................................................18
Power Requirements............................................................................................19
Power Delivery Considerations...........................................................................19
CPU...................................................................................................................................19
System RAM.....................................................................................................................20
Resetting BIOS to Factory Defaults .................................................................................20
Clearing CMOS RAM and RTC Registers.......................................................................20
Real Time Clock (RTC)....................................................................................................21
Expansion Bus..................................................................................................................21

Contents
Bengal (VL-EPMe-30) Reference Manual vi
PCI.......................................................................................................................21
PCIe/104†OneBank†...........................................................................................21
Interfaces and Connectors .........................................................................................23
User I/O Connector........................................................................................................... 23
Serial Ports........................................................................................................................24
COM Port Configuration.....................................................................................24
RS-485 Mode Line Driver Control......................................................................25
Serial Port Connectors.........................................................................................25
I2C.....................................................................................................................................25
GPIO.................................................................................................................................25
Battery Connector.............................................................................................................26
VL-CBR-0203 External Battery Module............................................................. 26
Ethernet Status LEDs........................................................................................................27
USB Interfaces..................................................................................................................27
LEDs.................................................................................................................................28
Programmable LED.............................................................................................28
SATA/mSATA Activity LED .............................................................................28
Power LEDs.........................................................................................................28
Power Button....................................................................................................................29
Supported Power States.......................................................................................29
Pushbutton Reset ..............................................................................................................30
Speaker .............................................................................................................................30
Video Interfaces................................................................................................................31
VGA Connector...................................................................................................31
DisplayPort..........................................................................................................32
Console Redirection ............................................................................................32
Ethernet.............................................................................................................................33
Ethernet Connectors ............................................................................................33
Ethernet Status LEDs...........................................................................................34
SATA Port ........................................................................................................................35
PCIe Mini Card / mSATA................................................................................................ 36
PCIe Mini Card LEDs .........................................................................................38
Digital I/O.........................................................................................................................38
DIO Guidelines....................................................................................................39
SPX Expansion Bus..........................................................................................................40
VersaLogic SPX Expansion Modules ................................................................. 41
SPI Registers........................................................................................................ 42
Thermal Considerations .............................................................................................45
Selecting the Correct Thermal Solution for Your Application ........................................45
Heat Plate.............................................................................................................45
System-level Considerations ...............................................................................46
CPU Thermal Trip Points....................................................................................47
Thermal Specifications, Restrictions, and Conditions ........................................ 48
Overall Restrictions and Conditions....................................................................48
Heat Plate Only Restrictions and Conditions:.....................................................48
Heat Sink Only Considerations: ..........................................................................48
Heat Sink with Fan Considerations:....................................................................48

Contents
Bengal (VL-EPMe-30) Reference Manual vii
EPMe-30 Thermal Characterization.................................................................................49
Test Results..........................................................................................................50
Installing the VersaLogic Thermal Solutions...................................................................53
Installing the Passive Heat Sink ..........................................................................53
Installing the Heat Sink Fan ................................................................................54
Appendix A – References............................................................................................55
Figures
Figure 1. Major Components and Connectors (Top Side)..............................................................................2
Figure 2. Major Components and Connectors (Bottom Side) ........................................................................3
Figure 3. Bengal Board Block Diagram.........................................................................................................4
Figure 4. Bengal Dimensions and Mounting Holes........................................................................................8
Figure 5. VL-CBR-5015 Dimensions and Mounting Holes ...........................................................................9
Figure 6. Connector Locations (Top Side)...................................................................................................10
Figure 7. Connector Locations (Bottom)......................................................................................................11
Figure 8. VL-CBR-5015 Connectors............................................................................................................13
Figure 9. VL-CBR-2004 Dimensions, Connectors, Jumper Blocks, As-Shipped.........................................15
Figure 10. As-Shipped Jumper Settings .......................................................................................................16
Figure 11. Location of SW1 Configuration Switch Block............................................................................17
Figure 12. J20 and VL-CBR-1008 Pin Numbering......................................................................................18
Figure 13. Location and Pin Configuration of J8 Battery Connector ...........................................................26
Figure 14. VL-CBR-0203 Latching Battery Module....................................................................................26
Figure 15. Location of the D11 and D12 LEDs............................................................................................28
Figure 16. Side View of Board Showing Pin Numbers of the Ethernet Connectors.....................................33
Figure 17. Location of Ethernet Status LEDs...............................................................................................34
Figure 18. EPMe-30EAP CPU Core Temperature Relative to Ambient Temperature.................................50
Figure 19. EPMe-30EBP CPU Core Temperature Relative to Ambient Temperature.................................51
Figure 20. EPMe-30ECP CPU Core Temperature Relative to Ambient Temperature.................................52
Figure 21. Installing the Passive Heat Sink..................................................................................................53
Figure 22. Installing the Heat Sink Fan........................................................................................................54
Tables
Table 1: Connector Functions and Interface Cables......................................................................................12
Table 2: VL-CBR-5015 Functions................................................................................................................14
Table 3: Connector Functions and Interface Cables......................................................................................15
Table 4: Jumper Summary.............................................................................................................................16
Table 5: Switch Setting Summary .................................................................................................................17
Table 6: J20 Main Power Connector Pinout..................................................................................................18
Table 7: PCI/104-Express†“B” Connector (PCI) Current Ratings................................................................21
Table 8: PCIe/104†OneBank†Interfaces ......................................................................................................21
Table 9: PCI/104-Express†“A” Connector (PCIe/104†) Current Ratings .....................................................22
Table 10: J18 User I/O Connector Pinout .....................................................................................................23
Table 11: User I/O Connector Signal Routing to VL-CBR-5015 Paddleboard.............................................24
Table 12: COM1-2 Pinout – VL-CBR-5015 Connector J3...........................................................................25
Table 13: USB 3.0 J16 Connector Pinout .....................................................................................................27

Contents
Bengal (VL-EPMe-30) Reference Manual viii
Table 14: Supported Power States.................................................................................................................29
Table 15: VGA Video Output Pinout............................................................................................................31
Table 16: mini DisplayPort Connector Pinout...............................................................................................32
Table 17: Ethernet Connector Pinout (J1, J7) ...............................................................................................33
Table 18: Ethernet Status LEDs ....................................................................................................................34
Table 19: SATA Port Pinout.........................................................................................................................35
Table 20: PCIe Mini Card / mSATA Pinout .................................................................................................36
Table 21: PCIe Mini Card LED States..........................................................................................................38
Table 22: J21 I/O Connector Pinout..............................................................................................................39
Table 23: SPX Expansion Bus Pinout...........................................................................................................40
Table 24: SPI Control Register 1 Bit Assignments .......................................................................................42
Table 25: SPI Control Register 2 Bit Assignments .......................................................................................43
Table 26: CPU Thermal Trip Points..............................................................................................................47
Table 27: Temperature Monitoring Programs...............................................................................................47
Table 28: Absolute Minimum and Maximum Air Temperatures...................................................................48
Table 29: EPMe-30 Thermal Testing Setup..................................................................................................49

Bengal (VL-EPMe-30) Reference Manual 1
Introduction
Description
Features and Construction
The Bengal is a feature-packed single board computer (SBC) designed to support OEM
applications where high reliability and long-term availability are required. Its features include:
Intel†Atom†“Bay Trail” processor,
quad, dual, or single core with
processor clock rates up to 1.91 GHz
(Atom E3845)
Integrated IntelGen7 graphics core,
supports DirectX11, Open GL3, and
H.264, MPEG-2 encoding/decoding
Analog and dual Mini DisplayPort
video outputs
Up to 8 GB DDR3L memory, one
SO-DIMM socket
Two Intel I210-IT-based Ethernet
ports, auto-detect 10Base-T /
100Base-TX / 1000Base-T
One USB 3.0 port and five USB 2.0
ports
Trusted Platform Module
Two RS-232/422/485 serial ports
Three 8254 timer/counters
Sixteen digital I/O lines
SATA port, 3 Gb/s
Mini PCIe / mSATA socket, supports
Wi-Fi modems, GPS receivers, flash
storage, and other modules
SPX expansion
PC/104 form factor with PCIe/104†
OneBank†expansion
Customization available
The Bengal is compatible with popular operating systems such as Microsoft†Windows†, Windows
Embedded, Linux, VxWorks†, and QNX†.
VL-EPMe-30 boards are subjected to complete functional testing and are backed by a limited five-
year warranty. Careful parts sourcing and US-based technical support ensure the highest
possible quality, reliability, service, and product longevity for this exceptional single-board
computer (SBC).
Figure 1 and Figure 2 show the locations of the Bengal board’s connectors and major
components on the top side and bottom side of the board, respectively.
11

Introduction
Bengal (VL-EPMe-30) Reference Manual 2
Item Description Item Description
A
Intel Atom “Bay Trail” SoC
M
External battery connector
B
PMIC power regulator
N
PCIe Minicard (mSATA) connector
C
FPGA
O
Power connector
D
PCI Express Switch
P
Reserved
E
Ethernet 1 PHY
Q
Reserved
F
Ethernet 0 PHY
R
Configuration switches
G
Ethernet port 0
S
VGA connector
H
Ethernet port 1
T
Mini DisplayPort1
I
Digital I/O
U
CPU fan connector
J
USB hub device
V
Mini DisplayPort2
K
User I/O connector
W
SATA connector
L
SPX connector
Figure 1. Major Components and Connectors (Top Side)

Introduction
Bengal (VL-EPMe-30) Reference Manual 3
Item Description Item Description
A
PCI connector
F
SPI Flash device (backup)
B
Trusted Platform Module (TPM)
G
DDR3 SO-DIMM socket
C
USB 3.0 connector
H
COM port transceiver
D
PCIe/104 OneBank connector
I
COM port jumper block
E
SPI Flash device (primary)
J
Ethernet transformers
Figure 2. Major Components and Connectors (Bottom Side)
Technical Specifications
See the Bengal Data Sheet for complete specifications.
Thermal Considerations
The operating temperature for the Bengal is -40 °C to +85 °C, de-rated -1.1 °C per 305m (1,000
ft.) above 2,300m (7,500 ft.). All Bengal models include a rigid-mount heat plate thermal solution.
Refer to Chapter 6 for information on additional thermal solutions.

Introduction
Bengal (VL-EPMe-30) Reference Manual 4
Block Diagram
Figure 3. Bengal Board Block Diagram

Introduction
Bengal (VL-EPMe-30) Reference Manual 5
Cautions
Electrostatic Discharge
CAUTION:
Electrostatic discharge (ESD) can damage circuit boards, disk drives, and other
components. The circuit board must only be handled at an ESD workstation. If an
approved station is not available, some measure of protection can be provided by
wearing a grounded antistatic wrist strap. Keep all plastic away from the board, and do
not slide the board over any surface.
After removing the board from its protective wrapper, place the board on a grounded,
static-free surface, component side up. Use an antistatic foam pad if available.
The board should also be protected inside a closed metallic antistatic envelope during
shipment or storage.

Note:
The exterior coating on some metallic antistatic bags is sufficiently conductive to cause
excessive battery drain if the bag comes in contact with the bottom side of the Bengal.
Handling Care
CAUTION:
Avoid touching the exposed circuitry with your fingers when handling the board. Though
it will not damage the circuitry, it is possible that small amounts of oil or perspiration on
the skin could have enough conductivity to cause the contents of CMOS RAM to
become corrupted through careless handling, resulting in CMOS resetting to factory
defaults.
Earth Ground Requirement
CAUTION:
All mounting standoffs (four on PC/104 boards, eight on EBX and EPIC boards) should
be connected to earth ground (chassis ground). This provides proper grounding for EMI
purposes.
Battery Usage
CAUTION:
If you are using a CBR-5015 paddleboard with the Bengal board, do not connect an
external battery using the J8 connector. Connecting two batteries to the Bengal board
will damage the batteries and may possibly damage the Bengal board and the CBR-
5015 paddleboard as well.

Bengal (VL-EPMe-30) Reference Manual 6
Configuration and Setup
Initial Configuration
The following components are recommended for a typical development system:
Bengal (VL-EPMe-30) computer
VL-ATX power supply
VL-MM9-xxEBN DDR3 SO-DIMM module (see System RAM)
VGA display (or display with DisplayPort input)
Standard I/O paddleboard (VL-CBR-5015)
USB keyboard and mouse
USB CD-ROM drive (optional)
USB SSD or floppy disk drive (optional)
VL-HD35-xxx SATA hard drive (optional)
The following VersaLogic cables are recommended:
VL-CBR-1204 VGA adapter cable (or VL-EPH-V6 Mini DisplayPort converter)
VL-CBR-0702 or VL-CBR-0701 – SATA data cable
VL-CBR-0401 – ATX to SATA power adapter
VL-CBR-0804 – Ethernet RJ-45 adapter cable
VL-CBR-1008 – Main power cable
You will also need an operating system (OS) installation CD-ROM.
Basic Setup
The following steps outline the procedure for setting up a typical development system. The Bengal
should be handled at an ESD workstation or while wearing a grounded antistatic wrist strap.
Before you begin, unpack the Bengal and accessories. Verify that you received all the items you
ordered. Inspect the system visually for any damage that may have occurred in shipping. Contact
[email protected]om immediately if any items are damaged or missing.
Gather all the peripheral devices you plan to attach to the Bengal and their interface and power
cables.
It is recommended that you attach standoffs to the board (see Hardware Assembly) to stabilize
the board and make it easier to work with.
1. Install Memory
Insert the DDR3L DRAM module into the SO-DIMM socket J9 on the bottom side of the
board and latch it into place.
2. Attach Cables and Peripherals
Plug the VGA cable VL-CBR-1204 into socket J5. Attach the cable to the VGA display.
(Alternatively, you can attach a DisplayPort enabled display to one of the Mini DisplayPort
connectors at J3 or J22. The VL-EPH-V6 video adapter card converts DisplayPort output
to LVDS.)
Plug the VL-CBR-5015 paddleboard into socket J18.
22

Configuration and Setup
Bengal (VL-EPMe-30) Reference Manual 7
Plug a USB CD-ROM drive, USB keyboard, and USB mouse into any of the USB
connectors at J4 and J5 of the paddleboard.
Plug the SATA data cable VL-CBR-0702 into socket J2. Attach a hard drive to the
connector on the cable.
Attach the SATA power adapter cable VL-CBR-0401 to the ATX power supply and SATA
drive.
Optionally, attach a LAN cable to either of the Ethernet connectors at J1 or J7 on the
Bengal using the VL-CBR-0804 RJ-45 adapter.
3. Attach Power
Plug the power adapter cable VL-CBR-1008 into socket J20. Attach the motherboard
connector of the ATX power supply to the adapter.
4. Review Configuration
Before you power up the system, double-check all the connections. Make sure all cables
are oriented correctly and that adequate power will be supplied to the VL-EPMe-30 and
peripheral devices.
5. Power On
Turn on the ATX power supply and the video monitor. If the system is correctly
configured, a video signal should be present.
6. Select a Boot Drive
During startup, press <CTRL> <B> to display the boot menu. Insert the OS installation
CD in the CD-ROM drive and select to boot from the CD-ROM drive.
7. Install Operating System
Install the operating system according to the instructions provided by the operating
system manufacturer. (See Operating System Installation.)
BIOS Setup Utility
Refer to the BIOS Reference Manual (available on the Bengal Product Support Page) for
information on accessing and configuring settings in the BIOS Setup utility. All BIOS menus,
submenus, and configuration options are described in the BIOS Reference Manual.
Operating System Installation
The standard PC architecture used on the VL-EPMe-30 makes the installation and use of most of
the standard x86-based operating systems very simple. The operating systems listed on the
VersaLogic OS Compatibility Chart use the standard installation procedures provided by the
maker of the OS. Special optimized hardware drivers for a particular OS, or a link to the drivers,
are available at the Bengal Product Support Page.

Integrator’s Note:
Booting to Windows requires changing the default boot OS in the BIOS Setup utility.

Bengal (VL-EPMe-30) Reference Manual 8
Physical Layout
Dimensions and Mounting
Bengal Dimensions
The Bengal complies with PC/104-Plus dimensional standards. Figure 4 shows the board’s
dimensions to help with pre-production planning and layout.
Figure 4. Bengal Dimensions and Mounting Holes
(Not to scale. All dimensions in inches.)
33

Physical Layout
Bengal (VL-EPMe-30) Reference Manual 9
VL-CBR-5015 Dimensions
Figure 5 shows the dimensions and mounting holes for the VL-CBR-5015.
All dimensions are in inches
Illustration is not to scale
BENGAL_05
0.065
5.10
5.50
1.17
1.24
1.57
1.95
Figure 5. VL-CBR-5015 Dimensions and Mounting Holes
Hardware Assembly
The Bengal provides both PCI and PCIe/104 OneBank connectors for adding expansion modules
to the bottom of the stack.
The entire assembly can sit on a tabletop or it can be secured to a base plate. When bolting the
unit down, make sure to secure all four standoffs to the mounting surface to prevent circuit board
flexing. Standoffs are secured to the top circuit board using four pan head screws. Standoffs and
screws are available as part number VL-HDW-105.
An extractor tool is available (part number VL-HDW-203) to separate the expansion modules from
the stack. Use caution when using the extractor tool not to damage any board components.

Physical Layout
Bengal (VL-EPMe-30) Reference Manual 10
External Connectors
Bengal Connector Locations – Top Side
Item
Ref
Des.
Description Item
Ref
Des.
Description
A
J7
Ethernet Port 0
I
J12
Reserved
B
J1
Ethernet Port 1
J
J15
Reserved
C
J21
Digital I/O
K
J5
VGA Connector
D
J18
User I/O
L
J3
Mini DisplayPort1
E
J19
SPX Connector
M
J24
CPU Fan
F
J8
External Battery Connector
N
J22
Mini DisplayPort2
G
J14
PCIe Minicard (mSATA)
O
J2
SATA Connector
H
J20
Power Connector
Figure 6. Connector Locations (Top Side)

Integrator’s Notes:
The User I/O connector (J18) includes signals for COM ports, USB, LEDs, power and reset
buttons, audio, and speaker.
The DisplayPort audio channel works only on the Mini DisplayPort1 connector (J3).

Physical Layout
Bengal (VL-EPMe-30) Reference Manual 11
Bengal Connector Locations – Bottom Side
Item
Ref
Des.
Description
A
J11
PCI
B
J16
USB 3.0
C
J10
PCIe/104 OneBank
D
J9
DDR3 SO-DIMM
Figure 7. Connector Locations (Bottom)

Physical Layout
Bengal (VL-EPMe-30) Reference Manual 12
Bengal Connector Functions and Interface Cables
Table 1 provides information about the function, mating connectors, and transition cables for
Bengal connectors. Page numbers indicate where additional information is available.
Table 1: Connector Functions and Interface Cables
Connector
(Note)
Function Mating Connector Transition
Cable
Cable Description Page
J1 Gigabit Ethernet 1
FCI 10073599-008LF
housing, FCI 10044403-
101LF crimp VL-CBR-0804 12-inch 8-pin to RJ-45
Ethernet cable 33
J2 SATA Standard SATA VL-CBR-0702;
VL-CBR-0401
20-inch SATA data,
latching; ATX to SATA
power adapter
35
J3
Mini DisplayPort 1
—
—
—
32
J5 VGA Molex 501330-0500
pin/crimp VL-CBR-1204 12-inch 12-pin to 15-pin
VGA adapter board and
cable 31
J6
Factory Use Only
—
—
—
—
J7 Gigabit Ethernet 0
FCI 10073599-008LF
housing, FCI 10044403-
101LF crimp
VL-CBR-0804 12-inch 8-pin to RJ-45
Ethernet cable 33
J8 Battery connector
Molex 501330-0200
mating connector housing
Molex 501334-0100
mating connector crimp
pin for 28-32 gauge wire
— — 25
J9
DDR3 SO-DIMM
—
—
—
20
J10
PCIe/104
OneBank Stack
Down
— — — 21
J11 PCI Stack Down AMP 1375799-1 — — 21
J12 Factory use only — — — —
J14 PCIe Minicard /
mSATA
— — — 36
J15
Factory use only
—
— — —
J16 Micro USB 3.0 USB 3.0 Micro-A VL-CBR-1015 0.5 m USB 3.0 Micro-A to
Micro-B cable
27
J18
COM ports, USB,
PLED, power LED,
push-button reset,
power button,
audio jacks, PC
speaker, battery
input
Oupiin 1204-50G00B2A VL-CBR-5013A 12-inch 1.27 mm IDC 50- pin to 50-pin on VL-CBR-
5015 paddleboard 23
J19 SPX FCI 89361-714LF
VL-CBR-1401
or
VL-CBR-1402
2 mm 14-pin IDC, 2 or 4
SPX device cable 40
J20 Main power input Berg 69176-010 (housing) + Berg 47715-
000 (pins)
VL-CBR-1008 Interface from standard
ATX power supply 18
J21 Digital I/O
Molex 501193-2000
pin/crimp
VL-CBR-2005
12-inch 1 mm 20-pin DIO
cable and paddleboard
38
J22
Mini DisplayPort 2
—
—
—
32
J24 CPU fan
Provided with HDW-407
fan assembly (if used)
—
Fan power cable with 3-
pin connector
—
Note: Connector locations J4, J13, J17, and J23 are not used.