Vestax VOM-QFO LE DX User manual

Congratulations on your purchase of the Vestax QFO LE DX. There have been instructions added
to the CONNECTION section in page 10. Please be sure to completely read this supplemental
instruction sheet together with the user's manual to use the QFO LE DX safely and obtain its best
performance.
①The SUB PHONO/LINE select switch on
PGM2 is marked as the THRU/VINYL switch on
the QFO LE DX. (fig.1)
・THRU :Input signal from LINE IN 2
isassigned to PGM 2
・VINYL:Vinyl sound is assigned to PGM 2
②THRU OUT located on the rear panel outputs
the vinyl sound as LINE. (LINE OUT) This is
used to send the control signals of software
control vinyl to computers. (fig.2 Rear panel)
③LINE IN 1 located on the rear panel is input
connection for LINE signals. The signal will be
inputted to PGM 1.
fig.1
fig.2
Example of connection with a computer
DJ SOFTWARE START