VEVOR HLT1-NFI-F User manual

Technical Support and E-Warranty Certificate
www.vevor.com/support
Electrical Blanket
MODEL: HLT1-NFI-F / HLB-NFI-FF /
HLB-NFI-QF / HLB-NFI-KF
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and does not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

- 1 -
MODEL: HLT1-NFI-F / HLB-NFI-FF / HLB-NFI-QF / HLB-NFI-KF
Have product questions? Need technical support? Please feel free to
contact us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
Electrical Blanket

- 2 -
PRODUCTION SCHEDULE
TECHNICAL SPECIFICATION
FCC Information
CAUTION: Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment!
This device complies with Part 1S of the FCC Rules. Operation is subject to the
following two conditions:
1) This product may cause harmful interference.
2)This product must accept any interference received, including interference that
may cause undesired operation.
WARNING: Changes or modifications to this product are not expressly approved
by the party. Responsible for compliance could void the user's authority to operate
the product.
model
picture
HLT1-
NFI-F
HLB-
NFI-FF
HLB-
NFI-QF
HLB-
NFI-KF
Number of
power cables
1
1
2
2
Number of
controllers
1
1
2
2
model
HLT1-NFI-F
HLB-NFI-FF
HLB-NFI-QF
HLB-NFI-KF
Electrical Rating
120~ 60Hz
120~ 60Hz
120~ 60Hz
120~ 60Hz
power（W）
100
100
110*2
100*2
product size
50"x60"
72"x84"
84"x90"
100"x90"
net weight（kg）
1.25
2.14
2.97
3.36

- 3 -
Note: This product has been tested and found to comply with the limits for a Class
B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to
protect reasonably against harmful interference in a residential installation.
This product generates, uses, and can radiate radio frequency energy, and if not
installed and used by the instructions, it may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in
a particular installation. Suppose this product does cause harmful interference to
radio or television reception, which can be determined by turning the product off
and on. In that case, the user is encouraged to try to correct the interference by
one or more of the following measures.
· Reorient or relocate the receiving antenna.
· Increase the distance between the product and receiver.
· Connect the product to an outlet on a circuit different from that to which the
receiver is connected.
· Consult the dealer or an experienced radio/TV technician for assistance.
IMPORTANT INSTRUCTIONS
DO NOT DESTROY
WARNINGS AND SAFEGUARDS
TO REDUCE THE RISKS OF BURNS, ELECTRIC SHOCK, OVERHEATING,
FIRE, AND PERSONAL INJURY, PLEASE READ THE INSTRUCTIONS
CAREFULLY. THIS PRODUCT MUST BE USED BY THE FOLLOWING
INSTRUCTIONS:
01. READ ALL INSTRUCTIONS BEFORE USING THE PRODUCTS.
02. THE PRODUCTS ARE DESIGNED ONLY TO WARM UP THE HUMAN
BODY.
03. KEEP ALL DOGS, CATS, AND OTHER PETS AWAY FROM THIS HEATED
PRODUCT. THIS IS AN ELECTRICAL APPLIANCE THAT THEY CAN DAMAGE
OR BE INJURED BY.
04. DO NOT USE THIS HEATED PRODUCT WITH AN INFANT, A CHILD(0-3
YEARS OLD), AN INCAPACITATED OR IMMOBILE PERSON, APARAPLEGIC,
A QUADRIPPLEGIC, A DIABETIC, ONE INSENSITIVE TO HEAT SUCH AS A

- 4 -
PERSON WITH POOR BLOOD CIRCULATION OR ANYONE WHO CANNOT
CLEARLY UNDERSTAND THE INSTRUCTIONS AND/OR OPERATE THE
CONTROLS.
05. THIS PRODUCT CAN BE USED ON CHILDREN (3-8 YEARS OLD)ONLY
UNDER SUPERVISION FROM ADULTS AND IF THEY HAVE BEEN GIVEN
ADEQUATE INSTRUCTIONS ON HOW TO USE IT SAFELY.
06. THIS PRODUCT CAN BE USED BY CHILDREN OVER THE AGE OF 8,
PEOPLE WITH REDUCED PHYSICAL, SENSORY, OR MENTAL SKILLS, AND
PEOPLE LACKING EXPERIENCE OR KNOWLEDGE OF THEYARE
SUPERVISED AND HAVE BEEN INSTRUCTED ON HOW TO USE IT SAFELY,
FULLY AWARE OF THE CONSEQUENT RISK OF USE.
07. CHILDREN SHOULD NOT PLAY WITH THE PRODUCT.
08. CLEANING AND MAINTENANCE MUST NOT BE PERFORMED BY
CHILDREN UNLESS SUPERVISED.
09. DO NOT USE THIS PRODUCT ON A WATERBED, SOFA, BUNK BED, OR
MECHANICALLY ADJUSTABLE BED.
10. DO NOT USE THE PRODUCT WITH ROCKING CHAIRS, RECLINERS,
CHAIRS WITH CASTERS OR WHEELS, OR OTHER FURNITURESUBJECT TO
MOVEMENT.
11. DO NOT USE WITH ANOTHER ELECTRICALLY HEATED PRODUCT SUCH
AS A ELECTRIC BLANKET, ELECTRIC MATTRESS PAD, OR HEATED
THROW.
12. DO NOT TUCK IN, PINCH, FLEX, OR EXPOSE THE HEATING WIRE. DO
NOT WRAP OR TUCK THE PRODUCT, SUPPLY CORD, OR CONTROL IN A
SOFA OR OTHER FURNITURE. ALL PORTIONS OF THE PRODUCT AND
CONTROLLER SHOULD BE VISIBLE AT ALL TIMES.
13. DO NOT PUNCTURE; DO NOT FASTEN IN PLACE USING PINS OR OTHER
METALLIC OBJECTS.
14. NEVER USE PINS IN AND AROUND THE PRODUCT. THEY MAY DAMAGE
THE ELECTRIC WIRING.

- 5 -
15. DO NOT ROUTE ELECTRICAL CORDS BETWEEN THE MATTRESS AND
BOX SPRING. DO NOT ALLOW THE CORDS TO BE PINCHED.
16. DO NOT PULL, TWIST OR MAKE SHARP BENDS ON THE CORDS.
17. DO NOT USED WITH DAMAGED CORDS. DAMAGED CORDS CAN LEAD
TO POSSIBLE OVERHEATING OR FIRE.
18. WRAPPING THE CORD AROUND THE CONTROLLER MAY DAMAGE THE
CORD. LOOP LO0SELY WHEN STORING.
19. IFTHEPLUG DOES NOT HT INTO OUTLET, CONTACTAC(Alt+A)
ELECTRICIAN.
20. MAKE SURE THE CORD FROM THE CONTROLLER TO YOUR HEATED
PRODUCT IS CONNECTED AND LOCKED TIGHTLY.
21. DO NOT DRY CLEAN THE PRODUCT. CLEANING LIQUID MAY
DAMAGE THE INSULATION OF THE HEATING ELEMENT. IMPROPER
LAUNDERING MAY CAUSE PROBLEMS WITH THE HEATING WIRE WHICH
CAN LEAD TO FIRE.
22. THIS PRODUCT IS NOT DESIGNED FOR MEDICAL USE IN HOSPITALS.
23. THE ELECTRICAL AND MAGNETIC FIELDS EMITTED BY THE PRODUCT
MAY INTERFERE WITH THE FUNCTIONS OF MEDICAL DEVICES LIKE A
PACEMAKER. PLEASE CONSULT YOUR DOCTOR
BEFORE USE, IF YOU ARE EQUIPPED WITH A MEDICAL DEVICE.
24. PLEASE CHECK THE PRODUCT FREQUENTLY FOR SIGNS OF DAMAGE
OR WEAR AND TEAR. IF SUCH SIGNS ARE EVIDENT, IF THE PRODUCT HAS
BEEN USED INCORRECTLY, OR IF IT NO LONGER HEATS UP, IT MUST BE
CHECKED BY THE MANUFACTURER BEFORE BEING SWITCHED ON AGAIN.
THERE ARE NO USER-SERVICEABLE PARTS.
25. IF THE MAINS CONNECTION CORD IS DAMAGED, IT MUST BE
DISPOSED OF; IF THE CORD CANNOT BE REMOVED FROM THE PRODUCT,
THE PRODUCT SHOULD BE DISPOSED OF ALONG WITH THE CORD.
26. NEVER PULL BY THE CORD OR USE THE CORD AS A HANDLE; DO NOT
PINCH THE CORD.

- 6 -
27. THE ELECTRONIC COMPONENTS IN THE CONTROLLER WOULDWARM
UP WHEN THE PRODUCT IS IN USE. FOR THIS REASON, CONTROLLER
MUST NEVER BE COVERED WHILE IN USE.
28. THE PRODUCT MAY EXPERIENCE INCREASED HEAT IN AREAS WHERE
THE HEATED PRODUCT IS BUNCHED OR FOLDED WHILE IN USE.SO THEY
NEVER FOLDED, BALLED UP, OR BUNCHED THE PRODUCT IN ANY WAY
WHEN IN USE. THIS MAY RESULT IN OVERHEATING AND/OR PERMANENT
DRINKING OF THE FABRIC.
29. DO NOT USED IN AN ENVIRONMENT WITH OVERLY ABUNDANT
OXYGEN.
30. KEEP THE CONTROLLER AWAY FROM DRAFTY AREAS THAT MAY
BECOME DAMP OR WET SUCH AS AN OPEN WINDOW.
31. TURN OFF OR UNPLUG THE CONTROLLER FOR THE PRODUCT WHEN
NOT USED. NEVER LEAVE IT UNATTENDED WHILE USING, ESPECIALLY
WHILE CHILDREN ARE PRESENT.
32. BESURE, THIS PRODUCT IS USED ONLY ON AN AC SUPPLY CURRENT
CIRCUIT OF 110-120 VOLTS 60HZ. DO NOT USE WITH AN EXTENSION CORD.
DO NOT USE WITH GENERATORS, POWER CONVERTERS, OR INVERTERS.
33. THE PRODUCT SHOULD ONLY BE USED IN CONJUNCTION WITH THE
SPECIFIED CONTROLLER.
34. MUCH WASHING AND IMPROPER WASHING MAY CAUSE DAMAGE OF
TO THE PRODUCT, AND ENSURE TO WASH THE PRODUCT ACCORDING TO
THE INSTRUCTION ON THE LABEL OF THE PRODUCT.
35. DO NOT USE IF THE PRODUCT IS WET.
36. THE CONTROLLER IS NOT WATERPROOF. DO NOT IMMERSE IN
WATER.
37. NEVER IRON THE PRODUCT.
38. DO NOT USE WITH LINIMENT, SALVE, OR OINTMENT PREPARATIONS.
39. FOR HOUSEHOLD USE ONLY.
40. NOT FOR HOTELS, MOTELS, OR OTHER INSTITUTIONAL USE.

- 7 -
SAVE THESE INSTRUCTIONS; DO NOT DESTROY
INSTALLATION INSTRUCTIONS
POLARIZED PLUG:
Plug the power cord into a 110-120 volt wall outlet.
Do not attempt to force the plug. This appliance has
a polarized plug(one blade is wider than the other).
This plug is intended to fit only one way into an outlet
to reduce the risk of electrical shock. If the plug does
not fit in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician.
Do not attempt to modify the plug in any way. If the plug fits loosely into the AC
outlet, or if the ac outlet feels warm, do not use that outlet.
FCC CERTIFIED
This product complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This product may not cause harmful interference, and
2. This product must accept any interference received, including interference that
may cause undesired operation.
Note: This product has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential. This
product generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this product does cause
harmful interference to radio or televisions reception, which can be determined by
turning the product off and on, the user is encouraged to correct the interference
by one or more of the following.

- 8 -
Measures:
*Reorient or relocate the receiving antenna.
*Increase the separation between the product and the receiver.
*Connect the product to an outlet on a circuit different from that to which the
receiver is connected.
*Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Product Operation Guide
When setting up the heated product, follow the steps below in order.
Step 1:Locate the heated product's information label near the coupler.
Step 2: Connect the cord to the coupler at the bottom of the heated product until
the plastic hinges click into place.
CAUTION: The cord must be COMPLETELY CONNECTED. A risk of fire could
result from a loose connection.
Step 3:Plug the power cord into a 110-120 volt wall outlet.
CAUTION: Do not plug the main power cord into the wall outlet until you have
completely set up your heated product per the instructions.
Disconnect the power cord from the wall before detaching the control from the
heated product.
Always make sure cords and
controls are NOT trapped or
pinched between bed slats,
mattresses, or springs,
against the wall, footboard,
or bed frame, or between
furniture, walls, or chairs. Do
not wrap control in heated
products when in use.
Do not use with generator
power or inventor.

- 9 -
CAUTION:
Please follow these directions in the order they are given to ensure the product will
work correctly.
Please do not turn on the product until it has been fully assembled.
CAUTION:
To plug the control cord connector and coupler, make sure the align arrows on the
connector and cord are pushed until they lock.
Using Your Heated Product:
Warning: This product is equipped with a SAFETY SYSTEM. This sensor
technology prevents the product surface from getting overheated entirely and
would automatically switch off when a malfunction occurs. Please note that for
safety, the product could not be operated any longer after the malfunction. If the
overheat protection is activated, please get in touch with us.
1. press the"ON/OFF" button to the lowest heat setting to turn on the product.
2. Repeat pressing the "ON/OFF' button to scroll to desired heat setting.
3.There are totally 5 setting levels.1-2-3-4-5(From the lowest to the highest).Which
with the display light will shine accordingly.
User Tip: The fastest way to preheat is to set the product at the highest heating
level after turning it on.
4. To turn off the product, scroll through heat settings until all LED indicator lights
turn off.
CAUTION: Do not connect the controller to the power supply before connecting it
to the heated product.
Caution: ALWAYS turn the product OFF when not in use.
Note: To restart all products after a power failure, Press the power button, and the
heated product will begin to warm.
AUTO SHUT-OFF FEATURE
The "Auto-Off" feature is designed to conserve energy by automatically turning the
product off. Usually, the throw is 3 hours, and the electric blanket and a mattress
pad are 10 hours. For the exact hours, you can check the chart On page 01 of this
instruction.
Note: The "Auto-Off" feature automatically resets the timer after a power outage.

- 10 -
CARE INSTRUCTIONS
Before Washing or Storing Your Heated Bedding Product:
1. Disconnect the power cord from the wall BEFORE detaching the control cord
from the heated product.
2. Ensure that no cords are connected and that none of the wires have worn
through the fabric.
3. Carefully follow all washing instructions; your heated product may shrink and
cause a fire hazard.
· DO NOT submerge control in the water.
· DO NOT dry clean your heated product, Dry cleaning solvents may damage the
wires.
· DO NOT use bleach or cleaning fluids.
· DO NOT use a wringer.
· DO NOT iron your heated product.
· DO NOT use mothballs or sprays of any kind.
· DO NOT reconnect the heated product or use it until it is COMPLETELY dry.
· DO NOT wash or put into water the power cord or any of the product's cards.
· DO NOT use analgesic cream in combination with your heated product.
Taking care of your heated product is easy and safe as long as you follow a few
simple steps.

- 11 -
Machine Washing
1. Presoak the blanket/mattress pad/throw for 15 minutes in mild soap and cold
water.
2. Wash in mild soap and cold water on the 'delicate" or"gentle' cycle in the washer
for two minutes. Remember, do not use bleach.
3. Rinse in fresh, cold water.4Spin dry in the washing machine. Then gently stretch
it to its original size.
Machine Drying
Caution: Do not use commercial dryers or the dryers at your local Laundromat.
They get too hot and would damage the wiring of the heated product.
1. Preheat the dryer to the 'low" temperature for 2 minutes.
2. Place blanket/mattress pad/throw into the dryer and tumble dry for 10 minutes at
a low temperature.
3. Remove the blanket/mattress pad/throw while still damp, and gently stretch it to
its original size.
4. Drape the heated product over a clothesline or a shower rod. DO NOT use
clothespins
5. The Heated product must be completely dry before reconnecting the power or
control plug.
Hand Drying
1. Gently stretch the blanket/mattress pad/throw back to its original size.
2. Drape the heated product over a clothesline or hang it over a shower rod. DO
NOT use clothespins.
3. The Heated product must be COMPLETELY dry before reconnecting the power
or control plug.

- 12 -
QUESTIONS & ANSWERS
Problem
Cause
Solution
The product does
not produce enough
heat or does not
work.
Heating products provide
safe heat and protect
consumers' skin within a
temperature range based
on international safety
standards, which helps
avoid low-temperature
bums. Therefore, the
temperature setting is for
keeping warm instead of
getting hot.
If you don't feel the heat,
you can fold the product
and test it for 30 minutes to
see whether it works or
not(But please make sure
that the product is placed
fiat without being folded for
normal use). Please get in
touch with customer
service if you still can't feel
the heat after the test.
The indicator light
on My controller is
flashing.What
should L do?
Some errors happen on the
heated product. The
indicated light gives
warnings to the user.
Turn the controller off.
Unplug the controller from
the wall outlet. Unplug the
controller cord from the
product. Wait 30 seconds
and reconnect, making
sure the arrows are
properly aligned. Now plug
into the 110~120 volt wall
outlet and push the control
button until the
temperature is high. If you
still have issues, Contact
the producer.
The product does
not heat uniformly.
The product is folded, or the
heating wire is coiled during
use.
Please place the
under-blanket flat for use.
The temperature of the
body areas that contact the

- 13 -
heating zones is higher
than those that do not,
which is normal.
The product no
longer works after
being used for a
period of time.
The product is not used or
washed properly.
please contact our
customer service.
The controller is
light but the product
does not heat up.
Mis-used or mis-connected
of the heated product.
Test the product by folding
the textile over on itself
and turning the setting to
high. Ensure that the
indicator Light is on.After
approximately five
minutes, carefully feel
between the layers
Caution: Never leave the
the product was turned on
and folded up for more
than 5~7 minutes.
Why is my
controller warm?
It is normal for electric
product. Do not wrap the
controller in the heated
product during the using.
A small amount of heat is
produced when
transferring power from the
wall to the product. This
warmth is Completely
normal and is nothing to
be concerned about.
If the above suggestions cannot solve the problems, this might result from the
permanent switch-off protection via the safety system. In this case, please get in
touch with our customer service.
Made In China

Technical Support and E-Warranty Certificate
www.vevor.com/support