ViewZ VZ-MV1602-SDI User manual

VZ-MV1602-SDI User Manual
INSTRUCTION MANUAL
VER 1.1
2018.8.6

VZ-MV1602-SDI User Manual
1
Instruction Manual
Compact 1RU 16 Channel 3G-SDI VZ-MV1602-SDI Multiviewer
with 16×16 3G-SDI Matrix Switcher
This device is the perfect solution for a large broadcast project. One machine supports two modes, 16 channel SDI
multiviewer mode and 16x16 SDI matrix switcher. The input signal detects SD, HD and 3G-SDI automatically. The video
format of multiview outputs can be selected from total 9 formats from 720p to 1080p. There are 20 preset layouts
including 16/12/11/10/9/8/6/4 for choices. You can even SOLO any input signal in full screen through the shortcut key.
MMV16310 also supports UMD, audio meter, signal status and time code overlay. All functions can be quickly controlled
by the PC software or front panel button & knob.

VZ-MV1602-SDI User Manual
2
Default Mode: Multiviewer Mode
Connections
Standards
Interfaces
SDI Inputs Format Support
(HD) 1920×1080p 60/59.94/50/30/29.97/25/24/23.98
(HD) 1920×1080PsF 30/29.97/25/24/23.98
(HD) 1920×1080i 60/59.94/50
(HD) 1280×720p 60/59.94/50
(HD) 1280×720p 30/29.97/25/24/23.98
(SD) 625i 50
(SD) 525i 59.94
SDI & HDMI Outputs Format Support
1080p 60/50/30/25/24
1080i 60/50
720p 60/50
SDI Auto Switching
Automatically detects SD, HD and 3G-
SDI on inputs
SDI Video Rate
SD/HD/3G-SDI
SDI Compliance
SMPTE 292M, SMPTE 259M,
SMPTE 424M, SMPTE 352M,
SDI Video Input
16×SD/HD/3G-SDI(75Ω BNC)
SDI Video Loop Output
Control
Front panel button,
PC software via LAN/RS-422
SDI Video Output
2×SD/HD/3G-SDI(75Ω BNC)
HDMI Video Output

Technical Specifications
3
①Inputs SDI inputs 1-16 ②Loop Outputs SDI loop outputs 1-16
③RS-422 Reserved for software control ④LAN Software control and update
⑤Power Dual power connectors PS-1 & PS-2,
for power redundancy ⑥Power Switch To turn on or off the device
⑦Outputs Multiview outputs, SDI×2 & HDMI×1
Second Mode: Switcher Mode
Connections
Standards
SDI Format Support
(2K) 2048×1080p 30/29.97/25/24/23.98
(2K) 2048×1080PsF 30/29.97/25/24/23.98
(HD) 1920×1080p 60/59.94/50/30/29.97/25/24/23.98
(HD) 1920×1080PsF 30/29.97/25/24/23.98
(HD) 1920×1080i 60/59.94/50
(HD) 1280×720p 60/59.94/50
(HD) 1280×720p 30/29.97/25/24/23.98
(SD) 625i 50
(SD) 525i 59.94
SDI Compliance
SMPTE 372M, SMPTE 259M,
SMPTE 292M, SMPTE 296M,
SMPTE 424M, SMPTE 425M,
DVB-ASI
SDI Color Space and Precision
RGB 4:4:4 10bit/12bit
SDI Video Input
16×SD/HD/3G-SDI/DVI-ASI(75Ω BNC)
SDI Video Output
16×SD/HD/3G-SDI/DVI-ASI(75Ω BNC)
Updates and Configuration
LAN(RJ45)
Control
Front panel button,
PC software via LAN/RS-232

Technical Specifications
4
Interfaces
①Inputs SDI inputs 1-16 ②Outputs SDI outputs 1-16
③RS-422 Reserved for PC software control ④LAN PC software control and update
⑤Power Dual power connectors PS-1 & PS-2,
for power redundancy ⑥Power Switch To turn on or off the device
Note: The mode of Multiviewer and Switcher can be switched by PC software or knob menu.
Controls
Front Panel Control
①2.2 Inch LCD Display Show Device status and menu control
②IN/OUT Buttons
Input or output channel from 1 to 16 channel
1) Multiviewer Mode

Technical Specifications
5
and Channel Buttons - Switching an source to an window.
press buttons “IN, 1, OUT, 2” to switch source 1 signal to window 2.
- Switching an input to multiple windows.
Press buttons “IN, 1, OUT, 2, 4, 5” to switch source 1 signal to windows 2, 4, 5.
2) Switcher Mode
- Switching an input to an output.
press buttons “IN, 1, OUT, 2” to switch input 1 signal to output 2.
- Switching an input to multiple outputs.
Press buttons “IN, 1, OUT, 2, 4, 5” to switch input 1 signal to output 2, 4, 5.
3) Note
- Channel button over 10 need two buttons to combine,
For example, 10= [10+] [10+], 11=[10+] [1], 12=[10+][2], ... ,16=[10+][6]
- The OUT button indicator will automatically close after 8s. When it is off, you
only need to press the OUT button again to continue the unperformed switch.
③Time Code Button Quick switch for Time Code overlays ON/OFF
④Audio Meter Button Quick switch for Audio Meter bars ON/OFF
⑤UMD Button Quick switch for UMD overlays ON/OFF
⑥Multiview Layout Button Quick switch between 20 kinds of multiviewer layouts
⑦Full Screen Button
Press this button to activate the full screen mode; then select channel button to
solo any inputs as full screen
⑧Lock Button Lock or unlock, press the button to Lock or unlock front panel buttons
⑨Knob
Controls the menu.
Turn anticlockwise=menu Up , Turn clockwise=menu down, Press down = Enter
PC Control
You can control the Multiviewer via web browser. The default IP address of Multiviewer is 192.168.1.215.

Technical Specifications
6
LAN Port Control Instruction
I. LAN Port Control
Method A) When connecting device with a router with DHCP features.
The matrix switcher will auto obtain an IP address, so you can scan the device directly by the control software.
Method B) When connecting VZ-MV1602-SDI with a PC without DHCP.
Please make sure that device and PC are in the same local area network, and set PC’s IP address to
"192.168.1.xxx", except device’s default IP address 192.168.1.215, then press the "scanning" button on
control software to scan the device. If the device cannot be found, wait 30s and then scan again.
PS: check the LAN port indicators to see current state of device.
Yellow indicator blinking --- data is transmitting
Green indicator keeps on --- connect successfully with Ethernet
II. Seiral Port Control
1. Connecting device with a PC via serial port.
2. Press the SETTING

Technical Specifications
7
Menu Control
Main Menu Sub Menu Options Description
System
Setting
Language
Chinese/English
Change the Language between
Chinese and English
LCD brightness
10
-100
Set the brightness backlight between 10
-100
LCD ON/OFF
Always/ Off/ Dim
Set the state of backlight,there are three mode for
option: Always/Off/ Dim
LCD Sleep
5~60s
Set backlight time of
“Off”and “Dim”
Reset
Reset to default configuration
Custom1
Load Custom1 configuration
Custom2
Load Custom2 configuration
Return
Back to the main menu
Network
Setting
IP Acqui
Dynamic/Static
Two ways to acquire the IP: Static(set IP freely by
yourself) and
Dynamic(IP configured by router)
IP Addr
Set the IP ad
dress
NetMask
Default setting is 255.255.255.0
GateWay
Set Gateway according to current IP address
Save
Save network setting
Return
Back to the main menu
Overlay
Setting
Item Select
UMD/Input Resolu/Audio
Meter/Time Code/Border/Audio
Alarm
Select a certain overlay
Win/Source
1~16
Select a Window or signal sour
ce for each setting
Enable
On/Off
On/Off the selected overlay
Text Color
Yellow/White/Gray/Violet
Red/Light Blue/Light
Green/Light
Cyan/Light
Yellow/Transparent/HalfTrans/Blac
k/Blue/Red/Magenta/Green/Cyan
Text color setting

Technical Specifications
8
Background
Yellow/White/Gray/Violet
Red/Light Blue/Light Green/Light
Cyan/Light
Yellow/Transparent/HalfTrans/Blac
k/Blue/Red/Magenta/Green/Cyan
Background color setting
Return
Back to the main menu
Audio
Setting
Audio Source
WIN1~WIN16
Select the audio source of multiviewer output
Audio Meter
1~16
Select a certain window for audio meter setting
Channel
CH1&CH2
CH3&CH4
CH5&CH6
CH7&CH8
CH9&CH10
CH11&CH12
CH13&CH14
CH15&CH16
Set the audio channel of audio meter
Return
Back to the main menu
Output
Setting
Format
1080P60/1080P50/1080P30/1080
P25/1080P24/1080I60/1080I50/72
0P60/720P50
Set the output formats
Mode
Multiviewer/
Switcher
Change the mode between Multiviewer and
Switcher
SDI Loop Out
Under "Matrix Switcher" mode,
set all input and
output channels correspond one by one
Return
Back to the main menu
Device
Info
Version
Current version information
Return
Back to the
main menu
Exit
Exit main menu
Power
Power Supply
PS-1, PS-2, power redundancy
Voltage Range
DC 12-24V
Power Consumption
36W
Physical Specifications

Technical Specifications
9
Dimension
Standard 19” 1 rack unit
Net Weight
2.0kg
Gross Weight
3.8kg
Environmental Specifications
Operating Temperature
0℃~60℃
Storage Temperature
-30℃~70℃
Relative Humidity
0%~90% non-condensing
What's Included
Compact 1RU 16 Channel 3G-SDI Multiviewer with 16×16 3G-SDI Matrix Switcher
DC 12V 5A Power Adapter × 2
Warranty
3 Year Limited Manufacturer's Warranty.
Note: due to constant effort to improve products and product features, specifications may change without notice.