Vigitron MaxiiFiber Vi50004 User manual

Vi50004 4-Port Media Converter Installation Manual
Application Drawing
Media Converter
Important Safety Warning
WARNING! - To reduce the risk of fire or electric shock, do not expose
this apparatus to rain or moisture. This apparatus shall not be exposed to
dripping or splashing and no objects filled with liquids, such as vases shall
be placed on the apparatus.
WARNING! - This apparatus is a Class I product. This product must
be connected to a mains socket outlet thru an AC to DC Power supply.
WARNING! - The mains plug is used as the disconnect device and
shall remain readily operable.
DO NOT OPEN
RISK OF ELECTRIC SHOCK
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK,
DO NOT REMOVE COVER. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
IP Camera-end Installation
The Smart Choice for Transmission Solutions www.vigitron.com
Ethernet Switch/NVR-end Installation
- Connect an approved 12VDC power supply to the power connector of
Vi50004. An Octopus power cable is provided to simplify connection. Each
port can also use PoE if provided from switch.
- Connect the RJ45 connector of the Ethernet switch to the 100/1000BaseT
Ethernet port of Vi50004 using a standard Cat5/6 cable of maximum
328 feet (100 m) in length.
- Insert a suitable 1000Mbps SFP into the SFP socket of the Vi50004. The
SFP needs to match the specification of the fiber optics cable.
- Connect one end of the long fiber optic cable to a SFP module.
The Ethernet link, Fiber link, activity LEDs should be "ON" and "Blink" to
indicate the status of each port.
Note: As no standards exist between SFP and network switches the switch port bandwidth
setting may have to be fixed at 1000Mbps (1G).
- Read and keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Install in accordance with the manufacturer’s instructions.
- This installation should be made by a qualified service person and should
conform to all local codes.
- To reduce the risk of fire or electrical shock, do not expose these products
to rain, moisture, dripping or splashing.
- No objects filled with liquids, such as vases, shall be placed on Vigitron
equipment.
- DO NOT install the unit in a place where the operating ambient tempera
ture exceeds 70° C.
- Make sure that the external power supply output voltage is in the
recommended range.
- Do not install near any heat sources such as radiators, heat registers,
stoves or other apparatus that produce heat.
- Protect the power cord from being walked on or pinched particularly at
plugs and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long
periods of time.
- Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as a power
supply cord or plug is damaged, liquid has been spilled, or objects have
fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
- The power plug is used as the disconnect device and shall remain readily
operable.
UMVi50004-0521
- Insert a suitable 1000MBps SFP into the SFP socket of the Vi50000A. The
SFP needs to match the specification of the fiber optics cable.
- Connect the fiber connector of the optical wire to the SFP.
- If the IP Camera is non-PoE use an approved 12VDC or 48VDC power
adapter to power the Vi50000A.
- If the IP Camera is PoE enabled use the Vi0017 or another approved
48VDC power adapter to power the Vi50000A.
- Connect the IP camera RJ45 connector to the “10/100BaseT Ethernet” port
of Vi50000A using a standard Cat5/6 cable of maximum 100m in length.
The link LED on the 10/100 connector should be “ON” to indicate proper
connection between the camera and Vi50004.
Vigitron's Vi50004 is a 4-port fiber to UTP media converter enabling
Ethernet signals to be transmitted over different types of fiber optic cables.
The use of SFP fiber modules results in compatibility with all major single
and multimode fiber optics cables to achieve desired transmission
distances depending on the type of cables and SFPs. The Vi50004 is an
efficient solution for connecting uplinks from multiple network switches to
headend in IDF to MDF system configurations using fiber cables. The
Vi50004 expands fiber transmission capacity for most switches that have
just two fiber ports. With the growing number of cameras requiring 1G
connection, the Vi50004 provides an efficient solution for systems that
multiple of these cameras are used.
Up to four Vi50004 can be placed in a Vi5000R to create rackmountable
headend solutions from 4 to 16 ports providing cost effective solutions for
any size applications.
Network Switch
Data
Long Distance Fiber
PoE Camera
Vi50000A
Vi50004
Power
Supply
Data
Long Distance Fiber
Vi50000A
Power
Supply
Data
Long Distance Fiber
PoE Camera
Vi50000A
Power
Supply
Data
Long Distance Fiber
PoE Camera
Vi50000A
Power
Supply
Data + 60W PoE
328 ft. (100m)
Data + 60W PoE
328 ft. (100m)
Data + PoE
328 ft. (100m)
Data + PoE
328 ft. (100m)
Power
Supply
The Vi50004 along with Vi50000 enables addging fiber connection to any network switch. SFPs
need to be added to Vi50004 and Vi50000A to match the fiber optic cables.

Limited Lifetime Warranty
Vigitron, Inc. warrants that all Vigitron products (“Product”), if used in accordance
with these instructions, will be free of defects in material and workmanship for
lifetime defined as the duration period of time until product end of life is announce-
ment. After which Vigitron will continue to provide warranty services for a period of 3
years. Period covering valid warranty will be determined by proof of purchase in the
form of an invoice from an authorized Vigitron dealer.
Warranty will only be provided for as long as the original end user purchaser owns
the product. Warranty is not transferrable. At Vigitron's option, defective product will
be repaired, replaced or substituted with a product of equal value. This warranty
does not apply if, in the judgment of Vigitron, Inc., the Product fails due to damage
from shipment, handling, storage, accident, abuse or misuse, or if it has been used
or maintained not conforming to Product manual instructions, has been modified, or
serial number removed or defaced. Repair by anyone other than Vigitron, Inc. or an
approved agent will void this warranty. Vigitron, Inc. shall not under any circum-
stances be liable to any person for any incidental, indirect or consequential
damages, including damages resulting from use or malfunction of the product, loss
of profits or revenues or costs of replacement goods. The maximum liability of
Vigitron, Inc. under this warranty is limited to the original purchase price of the
Product only.
Technical Specifications*
RoHS
Electrical
Ethernet Standard 100/1000BaseT, Auto-Negotiation, Auto
MDI/MDI-X (x4)
Fiber Compatibility Multi-Mode Fiber Optical Cable: 50/125um
Multi-Mode Fiber Optical Cable: 62.5/125um
Single-Mode Fiber Optical Cable: 9/125um
Wave Division Multiplexing***
Distance Based on cable and SFP
Fiber Connection LC based on SFP (x4)
Connectors Fiber: SFP sockets compliant to MSA standards
Ethernet: 4 x RJ45
Power: 4 x 5mm round power connector
Status LED Power: Green LED
Ethernet: Link/Traffic, 100/1000Mbps
Compliances Data Interfaces & RFC 768 UDP, RFC 2068 HTTP
RFC 793 TCP, RFC 791 IP
RFC 1783 TFTP, RFC 894 IP over Ethernet
RFC 2544 TCP/IP Packet Transmission
Standards IEEE 802.3ab 1000Base-T, IEEE 802.3 10/100Base-T
IEEE 802.3u 100Base-TX
IEEE 802.3af, IEEE 802.3at
Power 12VDC @ 0.7A
Regulatory
Safety CE
Environmental RoHS, WEEE
Environmental
Humidity 0 to 95%, non-condensing
Temperature Operating: 0°C to +70°C
Storage: -40°C to +85°C
Mechanical
Dimensions 1.65 x 2.69 x 4.08 in., 4.19 x 6.83 x 10.36 cm (HxWxL)
Weight 0.59lb (266g)
Housing Extruded Aluminum
Octopus Cable Power supply cable (included)
Optional Accessories**
Vi0014, Power Supply
Vi5000R, Rackmount Adapter to Holds Up to (4) Vi50004s
Vi5000B, Blank Panel for Vi5000R
*Specifications subject to change without notice.
**Sold separately
***There is no standard method for reading SFP bdata rate. Different SFPs may not sense the differences
Ordering Information
Status LEDs
© Copyright 2021 Vigitron, Inc.
TEL (+1) 858 - 484 - 5209 • FAX (+1) 858 - 484 - 1205
7810 Trade Street, Suite 100, San Diego, CA 92121, USA • [email protected] • www.vigitron.com
LED Name Color Status Function
OFF Power is OFF
ON Power is ON
OFF No PoE
ON PoE
OFF Fiber Link is OFF
YELLOW ON /
FLASHING Fiber Activity
OFF No connection
FLASHING Connection is OK with Traffic
OFF No connection
ON Connection is OK
Link
(Standard Side)
Power GREEN
PoE
Fiber Port
Traffic
(Standard Side) GREEN
YELLOW
GREEN
Vi50004 4-Port 1G Ethernet Fiber Media Convertor
Vi50000 1-Port PoE 1G Ethernet Fiber Media Convertor
Vi0014 12VDC @ 3A Power Supply
Vi00850MMA-H 850nm Multi-Mode Hardened SFP
Vi01310SM-H 1310nm Single-Mode Hardened SFP
Vi01310MMA-H 1310nm Multi-Mode Hardened SFP
Vi01310sm2.5-H 1310SM 2.5Gbps Single-Mode Hardened SFP
PART No. Description
Note: The Vi01310sm2.5-H will only provide 1Gbps when used with Vi50004.