Viking SR-1 User manual

PRODUCT MANUAL
Designed, Manufactured and Supported in the USA
COMMUNICATION & SECURITY SOLUTIONS
Add Loud Ringing to Any Analog Phone
Features
The SR-1 will generate loud ringing from an analog
ringing line or from a dry contact closure. There
are 4 different ringing sounds to choose from.
Loudness is easily adjusted with a volume control
and test button.
The SR-1’s unique sounding rings are useful for
employees that often work away from their desks,
allowing them to instantly recognize when their
phone is ringing. A second set of contact inputs will
trigger a door chime (doorbell) sound. This can be
used to notify that a door has opened or used as a
door bell or push for assistance button.
The SR-1 comes complete with a power supply
and connections for an optional external speaker.
• Loud ringing from an analog line
• Loud ringing from a dry contact closure
• Choose one of four ringing sounds:
- Electronic warble (traditional loud ringer)
- Double gong (two identical “gong” tones)
- Quadruple chime (four descending chime tones)
- Electronic Bell
• Adjustable volume control
• Provides a door chime tone for either a door
bell, a door open sensor, or a “Push for
Assistance” button
• Test button for setting volume
• External 8 Ohm speaker can be added
• Power supply included
• Single line loud ringing
• Night bell ringing
• Business/offices/small warehouses
• Floating employee
• “Push Button for Assistance” chime
• Push button doorbell
Power: 120V AC/13.8V AC 1.25A, UL listed
adapter provided
Dimensions: 140mm x 115mm x 40mm (5.5” x
4.5” x 1.6”)
Shipping Weight: 0.75 kg (1.5 lbs)
Environmental: 0°C to 32°C (32°F to 90°F) with
5% to 95% noncondensing humidity
Maximum Sound Pressure: 90 db @ 1 meter
(nominal)
105 db with added 25AE Paging Horn
Connections: 6 cage clamp screw terminals
SR-1
Single Line Loud Ringer
and Door Chime
August 30, 2016
Applications
Specifications
www.vikingelectronics.com
Information: [phone]
VIKING

Installation
A. Wiring the SR-1
IMPORTANT: Electronic devices are susceptible to lightning and power station electrical surges from both the AC
outlet and the telephone line. It is recommended that a surge protector be installed to protect against such surges.
Programming
2
Rear View of the SR-1
13.8V AC
Power Input
120V AC
PABX/KSU
Common Audible
Contact Closure
Ringing Analog
PABX/KSU Station
- or -
Magnet
Normally Open
Door Sensor
Switch
or
Doorbell or
"Push for
Assistance"
Button Optional 8 Ohm
Speaker (model
25AE shown,
not included)
13.8 VAC
LINE
CONTACT
CHIME
EXT SPEAKER
B. Mounting the SR-1
UP
Call
VIKING©
3.40”
3.30”
2.35”
3.40”
1.55”
To open the speaker
box, remove the two
screws from the cover.
Mount the back panel to a
wall, a single gang box or
a 4” x 4” junction box with
the arrow pointing up.
Attach the cover to the
base with the two included
screws as shown.
Front View of the SR-1 Internal View of the
back panel SR-1 Side View of the SR-1
Rear View of the
W-2000A / W-2000A-EWP
The SR-1 contains two different functions: loud ringing and door chime.
Use the following sections to program and set-up each function.
A. Single Line Loud Ringer
1. DIP Switch Programming
Sw 1 Sw 2 Description
OFF OFF Electronic Warble
OFF ON Double Gong
ON OFF Quadruple Chime
ON ON Electronic Bell
VIKING©
Back Internal
View of the SR-1
Front View of the SR-1
12
ON
OFF ON
DIP Switches
Test Button
(bottom view)
Volume
Control
Minimum Maximum
Use a small screw
driver to adjust.
2. Test Button
The Test Button is used to test the
selected tone and set the volume
level.

3
3. Sound Output Specifications for Loud Ringer
All tones require a minimum of 180ms of ringing voltage (or contact closure) to trigger. Once
triggered, the electronic warble and electronic bell will run continuously until ringing stops (or
contacts open). All other tones (double gong, quadruple chime, and doorbell) will run through
their full sequence once and will not cycle again until the ringing stops (or contact opens) for at
least 50ms and a second ring signal (or contact closure) triggers them again.
a. Electronic Warble (traditional loud ringer)
Duration of Ring/Closure
Frequency alternates between
1440 Hz and 1140 Hz 20 times per second
0.74 sec 2.2 sec
0.36
sec
0.36
sec
0.36
sec 2.2 sec
Duration of Ring/Closure
Frequency alternates between
773 Hz and 769 Hz 20 times per second
575 Hz 575 Hz
888 Hz 699 Hz 584 Hz 492 Hz
ON
OFF
ON
OFF
ON
OFF
ON
OFF
b. Double Gong (two “gong” tones)
c. Quadruple Chime (four decending chime tones)
d. Electronic Bell
B. Door Chime
2.7 sec
794 Hz 526 Hz
ON
OFF
0.36 sec
A second set of contact inputs will trigger a door
chime (doorbell) sound. This can be used to
notify that a door has opened or used as a door
bell or push for assistance button. A momentary
contact closure on the door chime screw
terminals will produce the door chime (Ding-
Dong) tones (right).

The SR-1 will monitor for ringing on an analog phone line such as a PABX/KSU station and will produce
the selected loud ringing tone when ring voltage is detected. A dry contact closure can also be used to
trigger the selected loud ringing tone. Select the electronic warble tone (traditional loud ringing) for
noisy areas. The softer chime and bell tones work well in less noisy environments. The front panel Test
Button can be used to easily set the volume level.
A momentary contact closure on the door chime screw terminals will produce the door chime (Ding-
Dong) tones. This can be used to notify that a door has been opened, or used as a doorbell, or “Push
for Assistance” button.
An external 8 Ohm speaker can be used for greater volume and/or additional coverage.
4
Operation
Printed in the U.S.A.
IF YOU HAVE A PROBLEM WITH A VIKING PRODUCT, CONTACT: VIKING TECHNICAL SUPPORT AT [phone]
Our Technical Support Department is available for assistance Monday through Friday, 8:00am - 5:00pm central time. So that we can give you better service, before you call please:
1. Know the model number, the serial number and what software version you have (see serial label).
2. Have your Product Manual in front of you.
3. It is best if you are on site.
RETURNING PRODUCT FOR REPAIR
The following procedure is for equipment that needs repair:
1. Customer must contact Viking's Technical Support Department at 715-386-8666 to obtain a Return Authorization (RA) number. The customer MUST have a complete description of the problem,
with all pertinent information regarding the defect, such as options set, conditions, symptoms, methods to duplicate problem, frequency of failure, etc.
2. Packing: Return equipment in original box or in proper packing so that damage will not occur while in transit. Static sensitive equipment such as a circuit board should be in an anti-static bag,
sandwiched between foam and individually boxed. All equipment should be wrapped to avoid packing material lodging in or sticking to the equipment. Include ALL parts of the equipment. C.O.D. or
freight collect shipments cannot be accepted. Ship cartons prepaid to: Viking Electronics, 1531 Industrial Street, Hudson, WI 54016
3. Return shipping address: Be sure to include your return shipping address inside the box. We cannot ship to a PO Box.
4. RA number on carton: In large printing, write the R.A. number on the outside of each carton being returned.
RETURNING PRODUCT FOR EXCHANGE
The following procedure is for equipment that has failed out-of-box (within 10 days of purchase):
1. Customer must contact Viking’s Technical Support at 715-386-8666 to determine possible causes for the problem. The customer MUST be able to step through recommended tests for diagnosis.
2. If the Technical Support Product Specialist determines that the equipment is defective based on the customer's input and troubleshooting, a Return Authorization (R.A.) number will be issued.
This number is valid for fourteen (14) calendar days from the date of issue.
3. After obtaining the R.A. number, return the approved equipment to your distributor, referencing the R.A. number. Your distributor will then replace the Viking product using the same R.A. number.
4. The distributor will NOT exchange this product without first obtaining the R.A. number from you. If you haven't followed the steps listed in 1, 2 and 3, be aware that you will have to
pay a restocking charge.
DOD# 477
ZF301840 Rev B
Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking Electronics, and its affiliates
and/or subsidiaries assume no responsibility for errors and omissions contained in this information. Revisions of this document or new editions of it may be issued
to incorporate such changes.
Warranty
Product Support: [phone]
TWO YEAR LIMITED WARRANTY
Viking warrants its products to be free from defects in the workmanship or materials, under normal use and service, for a period of two years from the date of purchase
from any authorized Viking distributor. If at any time during the warranty period, the product is deemed defective or malfunctions, return the product to Viking Electronics,
Inc., 1531 Industrial Street, Hudson, WI., 54016. Customer must contact Viking's Technical Support Department at 715-386-8666 to obtain a Return Authorization (R.A.)
number.
This warranty does not cover any damage to the product due to lightning, over voltage, under voltage, accident, misuse, abuse, negligence or any damage caused by
use of the product by the purchaser or others. This warranty does not cover non-EWP products that have been exposed to wet or corrosive environments. This warranty
does not cover stainless steel surfaces that have not been properly maintained.
NO OTHER WARRANTIES. VIKING MAKES NO WARRANTIES RELATING TO ITS PRODUCTS OTHER THAN AS DESCRIBED ABOVE AND DISCLAIMS ANY
EXPRESS OR IMPLIED WARRANTIES OR MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE.
EXCLUSION OF CONSEQUENTIAL DAMAGES. VIKING SHALL NOT, UNDER ANY CIRCUMSTANCES, BE LIABLE TO PURCHASER, OR ANY OTHER PARTY,
FOR CONSEQUENTIAL, INCIDENTAL, SPECIAL OR EXEMPLARY DAMAGES ARISING OUT OF OR RELATED TO THE SALE OR USE OF THE PRODUCT SOLD
HEREUNDER.
EXCLUSIVE REMEDY AND LIMITATION OF LIABILITY. WHETHER IN AN ACTION BASED ON CONTRACT, TORT (INCLUDING NEGLIGENCE OR STRICT LIABILITY)
OR ANY OTHER LEGAL THEORY, ANY LIABILITY OF VIKING SHALL BE LIMITED TO REPAIR OR REPLACEMENT OF THE PRODUCT, OR AT VIKING'S OPTION,
REFUND OF THE PURCHASE PRICE AS THE EXCLUSIVE REMEDY AND ANY LIABILITY OF VIKING SHALL BE SO LIMITED.
IT IS EXPRESSLY UNDERSTOOD AND AGREED THAT EACH AND EVERY PROVISION OF THIS AGREEMENT WHICH PROVIDES FOR DISCLAIMER OF
WARRANTIES, EXCLUSION OF CONSEQUENTIAL DAMAGES, AND EXCLUSIVE REMEDY AND LIMITATION OF LIABILITY, ARE SEVERABLE FROM ANY OTHER
PROVISION AND EACH PROVISION IS A SEPARABLE AND INDEPENDENT ELEMENT OF RISK ALLOCATION AND IS INTENDED TO BE ENFORCED AS SUCH.
PART 15 LIMITATIONS
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference at his own expense.