Viking W-1000 Instructions for use

W-1000
W-1000
W-2000A
W-2000A
Handsfree Doorboxes
August 1, 2001
P
Ph ho on ne e. .. .. .7 71 15 5. .3 38 86 6. .8 88 86 61 1
i
in nf fo o@ @v vi ik ki in ng ge el le ec ct tr ro on ni ic cs s. .c co om m
h
ht tt tp p: :/ // /w ww ww w. .v vi ik ki in ng ge el le ec ct tr ro on ni ic cs s. .c co om m
Power: 120V AC/13.8V AC 1.25A UL listed adapter provided
Dimensions: W-1000 - Overall - 127 x 127 x 57 mm (5.0 x 5.0
x 2.25”), Plastic Electrical Box - 102 x 102 x 57mm (4 x 4 x
2.25”), W-2000A - 140 x 115 x 38mm (5.5” x 4.5” x 1.5”).
Shipping Weight: W-1000 - 1.36 kg (3 lbs), W-2000A - .75 kg
(1.5 lbs)
Connections: (4) position screw terminal strip
Ringer Output: 3.0 REN, 20Hz
Ring Cadence: 1 second ON, 3.5 seconds OFF
Maximum Loop Length: 1.9 Km (6300 ft) - 24 AWG twisted pair
Maximum Power Run: 45.7 m (150 ft) - 24 AWG twisted pair
Answer Your Door or Gate From Any Phone
in Your Home or Office
Now you can answer your door or gate from the safety of
your telephone!
The W-1000 (flush mount) and W-2000A (surface mount)
doorboxes are designed to be installed on the unused tele-
phone line input of nearly any phone system. One or two
doorboxes can also share an
existing residential phone line
when used in combination with a
C-1000A doorbox controller.
P
Pr ra ac ct ti ic ce e
T
TE
EL LE EC CO OM MS
SO
OL LU UT TI IO ON NS SF FO OR RT TH HE E2
21 1S
ST TC
CE
EN NT TU UR RY Y
TECHNICAL
TECHNICAL
S
Sp pe ec ci if fi ic ca at ti io on ns s
F
Fe ea at tu ur re es s• Commercial, industrial and residential door
security
• Door or gate communication
• Use with the C-1000A controller for single line
residential systems or when the operation of
door strikes or gate openers is necessary
M
Ma ad de ei in nt th he eU U. .S S. .A A. .
• W-1000: Vandal resistant, black powder
painted, aluminum faceplate with heavy duty
call button and mounting gaskets
• W-2000A: Ash colored, impact resistant, UV
stable, plastic chassis
• 24 volt talk battery
• 20 Hz ring generator (3.0 REN)
• Handsfree VOX operation
• Adjustable maximum number of rings (1 to
approximately 7)
• Microphone volume adjustment
• Compact 45° terminal strip for easy wiring
• Optional surface mount box (VE-5x5) avail-
able for the W-1000
When the Push To Call button is pressed, the doorbox gen-
erates a standard ring cadence for an adjustable number of
rings. To converse with the visitor, the inside party simply
answers the call from the phone of their choice.
A
Ap pp pl li ic ca at ti io on ns s
W-1000
W-2000A

-
Q170200
100½ 0.5W
UP
Call
VIKING©
A. Adjusting the Maximum Number of Rings
The W-1000/2000A can be adjusted to output a ring signal from 1 to approximately 7 rings. Turn the “RING ADJ” poten-
tiometer clockwise to increase the maximum number of rings as shown above.
Note: Test the unit after each potentiometer adjustment to determine if the desired number of rings was achieved.
Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking Electronics, and its affiliates and/or
subsidiaries assume no responsibility for errors and omissions contained in this information. Revisions of this document or new editions of it may be issued to incorporate
such changes.
Fax Back Doc 170
ZF301390 Rev D
Printed in the U.S.A.
P
Pr ro od du uc ct tS Su up pp po or rt tL Li in ne e. .. .. .7 71 15 5. .3 38 86 6. .8 86 66 66 6F Fa ax xB Ba ac ck kL Li in ne e. .. .. .7 71 15 5. .3 38 86 6. .4 43 34 45 5
Caution: When warm air comes in contact with cold surfaces, such as out-
side walls and conduits, it causes condensation. To prevent condensation and
moisture from accumulating inside the W-1000 always bring conduit into the
bottom of the unit. Otherwise drill a 1/4” diameter hole in the bottom of the
gray plastic box for drainage.
Note: The W-1000 will NOT mount to a standard double gang box.
Note: When using the large foam gasket (flush mounting), peel off the paper
liner and adhere gasket to the back of the faceplate, centering over the four
corner mounting holes.
Call
I
In ns st ta al ll la at ti io on n
P
Pr ro og gr ra am mm mi in ng g
B. Adjusting the Microphone Volume
In certain noisy locations (background traffic, machinery or wind), the microphone volume may need to be decreased.
A symptom of this is one-way talk path, in which the distant party cannot be heard over the speaker. A “MIC VOL”
adjustment is provided on the W-1000/2000A for increasing or decreasing the microphone sensitivity.
Notes: If the microphone volume is set too high or too low, one-way talk path may occur. For extremely noisy envi-
ronments, use the W-3000 (Fax Back Document 180).
+
+
RING ADJ
MICVOL
VIKING© MODEL C-1000A
VIKING
ELECTRONICS
HUDSON,WI 54016
DOOR ENTRY/PAGING
CONTROLLER
POWER 13.8V AC
LINE IN PHONES STATUS
AUX. CONTACT OUTPUT DOOR STRIKE 1 DOOR BOX 1 DOOR BOX POWER DOOR BOX 2 DOOR STRIKE 2
34567891011
12
12
or
-or-
-or-
C.O. Line C-1000A
120V AC
13.8V AC
Standard PVC
electrical box
(Carlon part #
E989NNJ - included)
Large foam or small
rubber gasket
(included)
Important: Do NOT install a W-1000 or a W-2000A on a telephone line without a C-1000A (Fax Back Document 155).
RING ADJ
MIC VOL
Single Line
non-KSU phone
Unused PABX/KSU
trunk input
Mount back panel to a wall, a sin-
gle gang box or a 4”x4” junction
box with the arrow pointing up.
3.63”
Typical
3.40”
1.55”
3.30”
2.35”
3.40”
A. Mounting the W-1000
B. Mounting the W-2000A
C. Wiring the W-1000 or the W-2000A
Side view of the W-2000A
W-1000 and W-2000A Terminals
shown from back
Attach the cover to the base
with the two included screws
as shown.
Front view of the W-2000A Back panel of the W-2000A
To open the speaker box,
remove the two screws from the
cover.
Multi-Line
Phone
Note: Retrieve Fax Back Document 155 for residential installation information on the C-1000A.