Viking DGWH User manual

VENTILATION
Built-In Classic Chimney Glass Wall Hood
PLANNING AND DESIGN GUIDE
VIKINGRANGE.COM • 1-888-VIKING1
R E V I S E D 1 / 1 5 / 0 9
© 2 0 0 9 V R C — INFORMATION SUBJECT TO CHANGE
All models include
FINISH DETAILS
• Stainless Steel (SS)
Standard Features & Accessories
Model Options
ORDERING INSTRUCTIONS
First specify model number, followed by color code (DGWH3042SS).
• Recommended for use with 30” and
36”W. non-griddle/grill ranges, 30” and
36”W. non-griddle/grill rangetops, and
30” and 36”W. cooktops
• Heavy-duty construction; sleek,
contemporary design and styling
o Virtually seamless stainless steel
design with no visible screws
• Adjustable duct cover (for 8 9’
ceilings) ships standard with hood
• Heat sensor turns the ventilator on full
power when cooking temperatures
reach uncomfortable levels
• Variable speed 450 CFM blower ships
standard for custom venting—allows
you to leave ventilator at favorite/most-
used setting
• May be converted for non-ducted
recirculation (accessory kit sold
separately)
• Advanced, electronic push-button
controls with LED display
• Delay feature allows you to set the
ventilator to shut off on its own
• Easy cleanup
o Dishwasher-safe, stainless steel mesh
filters efficiently remove grease and
heated vapors from the air, and are
easily removed for quick cleaning
(frame and mesh are stainless steel)
•See Dimensions & Specifications
table for number of filters per model
o Design of low-profile filter system
means less interior hood space to be
cleaned
• Two 20-watt halogen lights with
dimmer control. (bulbs included)
DGWH Designer
Chimney Glass Wall Hood

VENTILATION
Built-In Classic Chimney Glass Wall Hood
PLANNING AND DESIGN GUIDE
VIKINGRANGE.COM • 1-888-VIKING1
R E V I S E D 1 / 1 5 / 0 9
© 2 0 0 9 V R C — INFORMATION SUBJECT TO CHANGE

Please see
Installation Notes &
Accessories for
important information,
including ventilator
kits, duct covers,
backsplashes, and
warming shelf
panels.
Dimensions & Specifications
PRODUCT DIMENSIONS
20”
(50.8cm)
12”
(30.5cm)
35-7/16”
(106.4cm)
11-1/2”
(29.2cm)
27-1/2”
(69.9cm)
to
48”
(121.9cm)
3-5/16”
(8.4cm)
DGWH Designer
Chimney Glass Wall Hood
CHIMNEY WALL HOOD
Model Hood Duct Cover Li hts Filters Heat Approx.
Width Hei ht Width Depth Hei ht Lamps Ship. wt.
DGWH3646 35-7/16” 3-5/16” 11-1/2” 12” (30.5 cm) 27-1/2” (69.9 cm)— 22N/A 67 lbs.
(90.0 cm) (8.4 cm) (29.2 cm) 48” (121.9 cm) (30.4 kg)

VENTILATION
Built-In Classic Chimney Glass Wall Hood
PLANNING AND DESIGN GUIDE
VIKINGRANGE.COM • 1-888-VIKING1
R E V I S E D 1 / 1 5 / 0 9
© 2 0 0 9 V R C — INFORMATION SUBJECT TO CHANGE
60”min.
(152.4cm)
to
66”max.
(167.6cm)
36”
(91.4cm)
24”min.
(61.0cm)
to
30”max.
(76.2cm)
Dimensions & Specifications
CLEARANCE DIMENSIONS
CHIMNEY WALL HOOD
Note: For best performance and safe, efficient operation, it is recommended that the bottom of the hood be 24” (61.0 cm) to
30” ( 6.2 cm) above the countertop.
DGWH Designer
Chimney Glass Wall Hood

PLANNING AND DESIGN GUIDE
VIKINGRANGE.COM • 1-888-VIKING1
R E V I S E D 1 / 1 5 / 0 9
© 2 0 0 9 V R C — INFORMATION SUBJECT TO CHANGE
Proper installation/ductin is extremely
important to ensure maximum
performance. Use a qualified and
trained installer.
DUCTING
• 450 CFM interior (blower
included)
• Check with a qualified and
trained installer for local codes
and makeup air requirements,
if any.
• Max. duct run length—50’
(152.4 m)
o Duct run length is for general
reference only; for longer
duct runs, increase duct size
and contact a qualified and
trained installer.
o Straight runs and gradual
turns are best; for example,
each 90” elbow is equivalent
to 5’ 10’ (1.52 3.05 cm) of
straight run.
• 6” round duct
o Never use flexible duct; it
creates back pressure/air
turbulence and greatly
reduces performance.
GAS
Not applicable
ELECTRICAL
• Hardwire direct with two-wire
with ground
• 120 VAC/60 Hz
• Max. amp usage—3.13
PLUMBING
Not applicable
VENTILATION
Built-In Classic Chimney Glass Wall Hood
Installation Requirements
Model Interior Ventilator Kits Interior Duct Size Interior Max. Amps
DGWH3646 450 CFM Standard 6” (15.2 cm) 3.13
Note: All CFMs are based on tests with 0.1 static pressure. Without applying static pressure (some brands do not), CFM could be greatly
overstated.
UTILITY REQUIREMENTS
DGWH Designer
Chimney Glass Wall Hood

PLANNING AND DESIGN GUIDE
VIKINGRANGE.COM • 1-888-VIKING1
R E V I S E D 1 / 1 5 / 0 9
© 2 0 0 9 V R C — INFORMATION SUBJECT TO CHANGE
VENTILATION
Built-In Classic Chimney Glass Wall Hood
Recirculatin Hood Conversion Kits
• For DGWH only
• Eliminates ducting
•Kit includes
o Charcoal filter
o Installation hardware
o Top vent/grille
•Air diverter
•Reducing collar
Duct Cover Extensions
• For DGWH only
• 11-1/2”W. x 12”D. x 36”-56”H.
• Extends height of hood by up to 12” (for 10’ ceilings)
• Replaces adjustable duct cover supplied with hood
• Specify finish code following accessory model number (for example, DGCE1210-SS)
• Available in Stainless Steel (SS)
Compliance Information
WARRANTY SUMMARY*
• One-year full warranty—complete product
• Five-year limited warranty—all ventilator motors
• Ninety-day limited warranty—cosmetic parts such as glass, painted, and decorative items
*Must use Vi ing ventilator its with Vi ing hoods; use of non-Vi ing its voids product warranty. For complete warranty see Use & Care Guide.
Warranty valid on Viking products shipped within the United States and Canada.
Installation Notes & Accessories
Model Description Approx. ship wt. lbs. (k )
DGRK36 36”W. gla hood 3 (1.1)
Model Description Approx. ship wt. lbs. (k )
DGCE1210 De igner gla duct cover exten ion 12 (5.4)