Viking DCH 12''H User manual

Viking Range Corporation
111 Front Street
Greenwoo , Mississippi 38930 USA
[phone]
For pro uct information,
call 1-888-VIKING1 (845-4641)
or visit the Viking Web site at
vikingrange.com
F20472 (062207J)
UL
C
UL
Viking Installation Guide
Designer Hoods

Table of Contents
Warnings & Important Information _________________________________________________________ 3- 4
DCH 12”H. Classic Chimney Wall Hoo s w/Stan ar Ventilator
Dimensions & Specifications ______________________________________________________ 5
Clearance Dimensions ____________________________________________________________ 6
Interior Ventilator Dimensions _____________________________________________________ 7
DCWH/DCWN/DCWL Classic Chimney Wall Hoo s—
Le geless & Le ge 30”, 33”, 36”, 39”, 42”, 45”, 48”, & 51”
Dimensions & Specifications _______________________________________________________ 8
Clearance Dimensions ____________________________________________________________ 9
Interior Ventilator Dimensions ____________________________________________________ 10
Exterior Ventilator Dimensions ___________________________________________________ 11
DCIH Classic Chimney Islan Hoo s 36”, 42”, & 54”
Dimensions & Specifications ______________________________________________________ 12
Clearance Dimensions___________________________________________________________ 13
Interior Ventilator Dimensions_____________________________________________________ 14
Exterior Ventilator Dimensions ___________________________________________________ 15
DTWS Slim Tra itional Wall Hoo s 30”, 36”, 42”, & 48”
Dimensions & Specifications _____________________________________________________ 16
Clearance Dimensions ___________________________________________________________ 17
Interior Ventilator Dimensions_____________________________________________________ 18
Exterior Ventilator Dimensions ___________________________________________________19
DTWL/DTWN Tall Tra itional Wall Hoo s—Le geless & Le ge 30”, 36”, 42”, & 48”
Dimensions & Specifications _____________________________________________________ 20
Clearance Dimensions___________________________________________________________ 21
Interior Ventilator Dimensions ___________________________________________________ 22
Exterior Ventilator Dimensions ___________________________________________________ 23
DSWB Box Wall Hoo s 30”, 36”, 42”, & 48”
Dimensions ___________________________________________________________________ 24
Clearance Dimensions ____________________________________________________________ 25
Interior Ventilator Dimensions _____________________________________________________ 26
Exterior Ventilator Dimensions ___________________________________________________ 27
Planning Information________________________________________________________________ 28
Installation Proce ure
Installation (DCH 12”H. Classic Chimney Wall Hoo s w/Stan ar Ventilator) ___________ 29
Duct Cover Option (DCH 12”H. Classic Chimney Wall Hoo s w/Stan ar Ventilator)____ 31
Installation (DCH 12”H. Classic Chimney Wall Hoo s w/Recirculating Kit)______________ 32
Installation (DCWH/DCWN/DCWL Classic Chimney &
DTWL/DTWN Tall Tra itional Wall Hoo s) ________________________________________ 34
Duct Cover Option (DCWH/DCWN/DCWL Classic Chimney Wall Hoo s) ______________ 35
Duct Cover Option (DTWL/DTWN Tall Tra itional Wall Hoo s) _______________________ 36
Installation (DTWS Slim Tra itional & DSWB Box Wall Hoo s) ________________________ 36
Duct Cover Option (DTWS Slim Tra itional Wall Hoo s) _____________________________ 38
Duct Cover Require (DSWB Box Wall Hoo s) _____________________________________ 39
Installation (DCIH Classic Chimney Islan Hoo s) ___________________________________ 40
Wiring Diagram _____________________________________________________________________42
Service & Registration_______________________________________________________________ 43
3
IMPORTANT–Please Read and Follow!
NOTE: If installing hood with war ing shelf panel,
install war ing shelf panel first.
IMPORTANT PLEASE READ AND FOLLOW
• Before beginning, please rea these instructions
completely an carefully.
• Do not remove permanently affixe labels, warnings, or
plates from the pro uct. This may voi the warranty.
• Please observe all local an national co es an
or inances. If no local co es are applicable, wire in
accor ance with the National Electrical Co e,
ANSI/NFPA 70-latest e ition.
• Out oor approve mo els shoul be installe in a
covere non-enclose area an shoul be protecte
from the elements as much as possible.
• The installer shoul leave these instructions with the
consumer who shoul retain for local inspector’s use an
for future reference.
• Check with a qualifie an traine installer or local co es
for makeup air requirement, if any.
This hoo is for resi ential installation only an is not
esigne for installation over a commercial pro uct. Make
sure power is off at the main circuit breaker or fuse box
before making connections. To avoi risk of fire, electric
shock, or injury to persons, turn off the electricity to the
hoo from the power supply before servicing or cleaning.
Viking hoo s are equippe with the variable spee
controls for blowers. These units will not function with a
single spee ventilator. All Viking ventilator kits are
esigne specifically for use with Viking hoo s. Use of any
non-Viking ventilator kit will voi the hoo warranty.
READ AND SAVE THESE INSTRUCTIONS
WARNING
TO REDUCE THE RISK OF A RANGETOP
GREASE FIRE
1. Never leave surface units unatten e at high
setting. Boilovers cause smoking an greasy
spillovers that may ignite. Heat oils slowly on
low or me ium settings.
2. Always turn hoo ON when cooking at high
heat or when cooking flaming foo s. (i.e. crepes
suzette, cherries jubilee, peppercorn beef
flambé).
3. Clean ventilating fans frequently. Grease shoul
not be allowe to accumulate on fan or filter.
4. Use proper pan size. Always use cookware
appropriate for the size of the surface element.
TO REDUCE THE RISK OF FIRE, ELECTRICAL
SHOCK, OR INJURY TO PERSONS, OBSERVE
THE FOLLOWING
1. Installation work an electrical wiring must be
one by qualifie person(s) in accor ance with
all applicable co es an stan ar s, inclu ing
fire-rate construction.
2. Sufficient air is nee e for proper combustion
an exhausting of gases through the flute
(chimney) of fuel burning equipment to prevent
back rafting. Follow the heating equipment
manufacturer’s gui eline an safety stan ar s
such as those publishe by the National Fire
Protection Association (NFPA), an the
American Society for Heating, Refrigeration an
Air Con itioning Engineers (ASHRAE), an the
local co e authorities.
3. When cutting or rilling into wall or ceiling, o
not amage electrical wiring or other hi en
utilities.
4. Ducte fans must always be vente to the
out oors.
5. WARNING!: To re uce risk of fire, use only
metal uctwork.
6. CAUTION!: To re uce risk of fire an to
properly exhaust air, be sure to uct air outsi e.
Do not vent exhaust air into spaces within walls
or ceilings, or into attics, crawl spaces, or
garages.
7. CAUTION!: To Re uce the Risk of Fire an
Electric Shock, Install this rangehoo only with
remote blower mo els manufacture by Viking,
mo el numbers – DEV900/DEV1200,
VEV900/VEV1200, OR DEV1500, VEV1500 or
integral blowers manufacture by Viking, mo el
numbers – DIV300, DIV440, DIV600, DIV800,
DIV1200, VIV300, VIV600, or VIV1200. NOTE –
Please refer insi e for specific canopy/blower
combinations.
WARNING
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK, OR INJURY TO PERSONS, OBSERVE THE
FOLLOWING
• Use this unit only in the manner inten e by the
manufacturer. If you have any questions, contact
the manufacturer.
• Before servicing or cleaning unit, switch power off
at service panel an lock service panel to prevent
power from being switche on acci entally. When
the service isconnecting means cannot be locke ,
securely fasten a prominent warning evice, such
as a tag, to the service panel.

5
IMPORTANT–Please Read and Follow!
4
WARNING
TO REDUCE THE RISK OF FIRE,
ELECTRICAL SHOCK, OR INJURY
TO PERSONS
Rangehoo s must be installe with
the ventilators that are specifie on
their carton in icating suitability with
this mo el. Other ventilators cannot be substitute .
CAUTION
For general ventilating use only. Do not use to
exhaust hazar ous or explosive materials an
vapors.
WARNING
TO REDUCE THE RISK OF INJURY TO PERSONS
IN THE EVENT OF A RANGETOP GREASE FIRE,
OBSERVE THE FOLLOWING. (Based on “Kitchen
Firesafety Tips,” published by NFPA.)
1. SMOTHER FLAMES with a close fitte li , cookie
sheet, or metal tray, then turn off the burner. BE
CAREFUL TO PREVENT BURNS. If the flames o
not go out imme iately, EVACUATE AND CALL
THE FIRE DEPARTMENT.
2. NEVER PICK UP A FLAMING PAN. You may be
burne .
3. DO NOT USE WATER, inclu ing wet ishcloths or
towels a violent steam explosion will result.
4. Use an extinguisher ONLY if
• You know it is a Class ABC extinguisher, an you
alrea y know how to operate it.
• The fire is small an containe in the area where
it starte .
• The fire epartment is being calle .
• You can fight the fire with your back to an exit.
DCH 12”H. Classic Chim ey Wall Hoods w/Sta dard Ve tilator
Descriptio 30” 36”
Duct cover wi th 16” (40.6 cm)
Duct cover epth 12” (30.5 cm)
Duct cover height 18” (45.7 cm) to 30” (76.2 cm)
Number of lights 2
Number of filters 2
Interior ventilator kit 460 CFM
Interior uct size* 7” (17.8 cm)
Interior—Maximum amps 5.6
* Disregard when using recirculating kits.
4 0 CFM blower is shipped with hood.
NOTE: All products ust be hard wired with 2-wire with ground.
24”
(61.0cm)
16”
(40.6 cm)
12”
(30.5cm)
18”
(30.5cm)
to
30”
(76.2cm)
12”
(30.5cm)
A
A (Hood width)
30”W. 29-7/8” (75.9 cm)
36”W. 35-7/8” (91.1 cm)
2 ”
(5.1cm)
Dimensions & Specifications
(DCH 12”H. Classic Chimney Wall Hoo s w/Stan ar Ventilator)
NOTE: Optional duct cover sold separately.

6
Clearance Dimensions
7
30”min.
(76.2cm)
to
33”max.
(83.8cm)
66”min.
(167.6 cm)
to
69”max.
(175.3 cm)
36”
(91.4cm)
A
30”W. 14-15/16” (37.9 cm)
36”W. 17-15/16” (45.6 cm)
16” (40.6 cm)
A
4”
(10.2 cm)
120 V
7” (17.8 cm) dia.
duct location
9-3/4”
(24.8 cm)
460 CFM Interior Ventilator Installation
(DCH 12”H. Classic Chimney Wall Hoo s w/Stan ar Ventilator)
(DCH 12”H. Classic Chimney Wall Hoo s w/Stan ar Ventilator)
Top view
Interior Ventilator Dimensions

Clearance Dimensions
9
Dimensions & Specifications
8
24”
(61.0cm)
B
C
A
D
12”
(30.5cm)
E
E (Hood height)
30”W. 12” (30.5 cm)
33“W. 12” (30.5 cm)
36”W. 14” (35.6 cm)
39“W. 14” (35.6 cm)
42”W. 14” (35.6 cm)
45“W. 14” (35.6 cm)
48”W. 14” (35.6 cm)
51”W. 14” (35.6 cm)
A (Duct cover width)
30”W. 10” (25.4 cm)
33“W. 10” (25.4 cm)
36”W. 12” (30.5 cm)
39“W. 12” (30.5 cm)
42”W. 12” (30.5 cm)
45“W. 12” (30.5 cm)
48”W. 18” (45.7 cm)
51”W. 18” (45.7 cm)
B (Hood width)
30”W. 29-7/8” (75.9 cm)
36”W. 35-7/8” (91.1 cm)
42”W. 41-7/8” (106.4 cm)
48”W. 47-7/8” (121.6 cm)
D (Duct height)
30”/33“W.
36”/39“W.
42”/45“W.
48”/51“W.
18” (45.7 cm) to
30“ (76.2 cm)
16” (40.6 cm) to
28” (71.1 cm)
C (Hood width–Ledge models)
33”W. 32-7/8” (83.5 cm)
39”W. 38-7/8” (98.4 cm)
45”W. 44-7/8” (114.0 cm)
51”W. 50-7/8” (129.2 cm)
25-1/2”
(64.8cm)
Ledge models only
2”
(5.1cm)
(DCWH Classic Chimney Wall Hoo s 30”, 36”, 42”, & 48”)
(DCWN Le geless mo els 30”, 36”, 42”, & 48”)
(DCWL Le ge mo els 33”, 39”, 45”, & 51”)
* A 1,200 CFM interior- or exterior-power ventilator should be used when installed over range/rangetop
with gas char-grill. Max duct run is 50 ft.
** It is recommended that the 1,500 CFM ventilator be used with longer duct runs. Max duct run is 75 ft.
NOTE: Maximum amp rating for hoods includes recommended ventilator kit rating; All products must be
hard wired with 2-wire with ground. An interior- or exterior-power ventilator kit must be purchased for
installation with all Designer hoods.
DCWH/DCWN/DCWL Classic Chim ey Wall Hoods—Ledgeless & Ledge
Descriptio 30”/33” 36”/39” 42”/45” 48”/51”
Duct cover wi th 10” (25.4 cm) 12” (30.5 cm) 12” (30.5 cm) 18” (45.7 cm)
Duct cover epth 12” (30.5 cm)
Duct cover height 18” (45.7 cm) to 16” (40.6 cm) to 16” (40.6 cm) to 16” (40.6 cm) to
30” (76.2 cm) 28” (71.1 cm) 28” (71.1 cm) 28” (71.1 cm)
Number of lights 2223
Number of filters 2233
Interior ventilator kits DIV300/ DIV300/ DIV600 DIV1200*
DIV440 DIV600
Exterior ventilator kits DEV900/ DEV900/ DEV900/ DEV1200*/
DEV1200* DEV1200* DEV1200* DEV1500**
Interior uct size 7” (17.8 cm) 7” (17.8 cm) 7” (17.8 cm) 10” (25.4 cm)
Exterior uct size 10” (25.4 cm)
Interior—Maximum amps 1.7/3.2 1.7/3.9 3.9 7.3
Exterior—Maximum amps 6.6./3.9 6.6./3.9 6.6/3.9 4.3/5.1
30”min.
(76.2cm)
to
36”max.
(91.4cm)
66”min.
(167.6 cm)
to
72”max.
(182.9 cm)
36”
(91.4cm)
(DCWH/DCWN/DCWL Classic Chimney Wall Hoo s)
NOTE: For best perfor ance, it is reco ended
that the botto of the hood be 30” (76.2 c ) to
36” (91.4 c ) above the countertop. These di ensions
provide for safe and efficient operation of the hood.

10
Exterior Ventilator Dimensions
11
1-1/2”
(3.8 cm)
10” (25.4 cm) dia.
duct location
1-1/2”
(3.8 cm)
18”
(45.8 cm)
23-15/16”
(60.8 cm)
1-1/2”
(3.8 cm) 120 V
power
supply
6”
(15.2 cm)
Classic
Chimney
w/Ledge
Classic
Chimney
1-1/2”
(3.8 cm)
7” (17.8 cm) dia.
duct location
A
1-1/2”
(3.8 cm) 120V
power
supply
6”
(15.2 cm)
B
A
30”W. 10” (25.4 cm)
33“W. 10” (25.4 cm)
36“W. 12” (30.5 cm)
39“W. 12” (30.5 cm)
42“W. 12” (30.5 cm)
45“W. 12” (30.5 cm)
B
30”W. 14-15/16” (37.9 cm)
33“W. 14-15/16” (37.9 cm)
36“W. 17-15/16” (45.6 cm)
39“W. 17-15/16” (45.6 cm)
42”W. 20-15/16” (53.2 cm)
45“W. 20-15/16” (53.2 cm)
Classic
Chimney
w/Ledge
Classic
Chimney
1-1/2”
(3.8 cm)
1-1/2”
(3.8 cm)
1-1/2”
(3.8 cm)
18”
(45.8 cm)
1-1/2”
(3.8 cm) 120 V
power
supply
Classic
Chimney
w/Ledge
Classic
Chimney
6”
(15.2 cm)
10” (25.4 cm) dia.
duct location
9
23-15/16”
(60.8 cm)
1-1/2”
(3.8 cm)
1-1/2”
(3.8 cm)
A
1-1/2”
(3.8 cm) 120V
power
supply
Classic
Chimney
w/Ledge
Classic
Chimney
6”
(15.2 cm)
C
B
A
30”W. 10” (25.4 cm)
33“W. 10” (25.4 cm)
36“W. 12” (30.5 cm)
39”W. 12” (30.5 cm)
42”W. 12” (30.5 cm)
45”W. 12” (30.5 cm)
B
30”W. 14-15/16” (37.9 cm)
33“W. 14-15/16” (37.9 cm)
36”W. 17-15/16” (45.6 cm)
39“W. 17-15/16” (45.6 cm)
42“W. 20-15/16” (53.2 cm)
45“W. 20-15/16” (53.2 cm)
C (Duct diameter)
30”W. 8” (20.3 cm)*
33“W. 8” (20.3 cm)*
36“W. 10” (25.4 cm)
39“W. 10” (25.4 cm)
42“W. 10” (25.4 cm)
45“W. 10” (25.4 cm)
900 or 1200 CFM Exterior Ventilator Installation
for 30”, 33”, 36”, 39”, 42”, & 45” mo els
1200 or 1500 CFM Exterior Ventilator Installation
for 48” & 51” mo els
300, 440 or 600 CFM Interior Ventilator Installation
for 30”, 33”, 36”, 39”, 42”, & 45” mo els
(DCWH/DCWN/DCWL Classic Chimney Wall Hoo s) (DCWH/DCWN/DCWL Classic Chimney Wall Hoo s)
1200 CFM Interior Ventilator Installation
for 48” & 51” mo els
Top view
Top view
Top view
Top view
Interior Ventilator Dimensions
* 8” to 10” transition to be
acquired locally.

Clearance Dimensions
13
Dimensions & Specifications
12
30”
(76.2cm)
B
A
14”
(35.6cm)
C
2”
(5.1cm)
12”
(30.5cm)
B (Hoodwidth)
36”W. 35-7/8” (91.1 cm)
42”W. 41-7/8” (106.4 cm)
54”W. 53-7/8” (136.8 cm)
A (Duct cover width)
36”W. 12” (30.5 cm)
42”W. 12” (30.5 cm)
54”W. 18” (45.7 cm)
C (Duct height)
36”W.
42”W.
54”W.
16” (40.6 cm)
or
28” (71.1 cm)
or
40” (101.6 cm)
(DCIH Classic Chimney Islan Hoo s 36”, 42”, & 54”)
* A 1,200 CFM interior- or exterior-power ventilator should be used when installed over range/rangetop
with gas char-grill. Max duct run is 50 ft.
** It is recommended that the 1,500 CFM ventilator be used with longer duct runs. Max duct run is 75 ft.
NOTE: Maxi u a p rating for hoods includes reco ended ventilator kit rating; All products ust be
hard wired with 2-wire with ground. An interior- or exterior-power ventilator kit ust be purchased for
installation with all Designer hoods.
DCIH Classic Chim ey Isla d Hoods
Descriptio 36” 42” 54”
Duct cover wi th 12” (30.5 cm) 12” (30.5 cm) 18” (45.7 cm)
Duct cover epth 12” (30.5 cm)
Duct cover height 16” (40.6 cm) or 28” (71.1 cm) or 40” (101.6 cm)
Number of lights 446
Number of filters 233
Interior ventilator kits DIV600 DIV600 DIV1200*
Exterior ventilator kits DEV900/ DEV900/ DEV1200*/
DEV1200* DEV1200*/DEV1500** DEV1200*/DEV1500**
Interior uct size 7” (17.8 cm) 7” (17.8 cm) 10” (25.4 cm)
Exterior uct size 10” (25.4 cm)
Interior—Maximum amps 3.9 4.7 8.6
Exterior—Maximum amps 6.6./3.9 7.4/4.7/5.5 5.6/6.4
30”min.
(76.2cm)
to
36”max.
(91.4cm)
66”min.
(167.6 cm)
to
72”max.
(182.9 cm)
36”
(91.4cm)
NOTE: Optional duct cover sold separately.
(DCIH Classic Chimney Islan Hoo s)
NOTE: For best perfor ance, it is reco ended
that the botto of the hood be 30” (76.2 c ) to
36” (91.4 c ) above the countertop. These di ensions
provide for safe and efficient operation of the hood.

Interior Ventilator Dimensions
14
Exterior Ventilator Dimensions
15
26-15/16”
(68.4 cm)
12”
(30.5 cm)
10” (25.4 cm) dia.
duct location
18”
(45.7 cm)
6” (15.2 cm)
120 V
power supply
7”
(17.8 cm)
15”
(38.1 cm)
4-3/4”
(12.1 cm)
4-3/4”
(12.1 cm)
12”
(30.5 cm)
A
7” (17.8 cm) dia.
duct location
15”
(38.1 cm)
12”
(30.5 cm)
120 V
power
supply
A
36”W. 17-15/16” (45.6 cm)
42”W. 20-15/16” (53.2 cm)
26-15/16”
(68.4 cm)
12”
(30.5 cm)
10” (25.4 cm) dia.
duct location
1
18”
(45.7 cm)
6” (15.2 cm)
120 V
power supply
7”
(17.8 cm)
15”
(38.1 cm)
4-3/4”
(12.1 cm)
4-3/4”
(12.1 cm)
12”
(30.5 cm)
A
10” (25.4 cm) dia.
duct location
15”
(38.1 cm)
9
12”
(30.5 cm)
120 V
power
supply
A
36”W. 17-15/16” (45.6 cm)
42”W. 20-15/16” (53.2 cm)
900 or 1200 CFM Exterior Ventilator Installation for 36” & 42” mo els
1200 or 1500 CFM Exterior Ventilator Installation for 54” mo els
600 CFM Interior Ventilator Installation for 36” & 42” mo els
(DCIH Classic Chimney Islan Hoo s) (DCIH Classic Chimney Islan Hoo s)
Top view
Top view
Top view
Top view
1200 CFM Interior Ventilator Installation for 54” mo els

Clearance Dimensions
17
Dimensions & Specifications
16
24”
(61.0 cm)
B
9”
(22.9 cm)
21”
(53.3cm)
to
33”
(83.8 cm)
A
12”
(30.5 cm)
B (Hood width)
30”W.29-7/8” (75.9 cm)
36”W.35-7/8” (91.1 cm)
42”W.41-7/8” (106.4 cm)
48”W.47-7/8” (121.6 cm)
A (Duct cover width)
30”W.12” (30.5 cm)
36”W.12” (30.5 cm)
42”W.12” (30.5 cm)
48”W.20” (50.8 cm)
2 ”
(5.1 cm)
(DTWS Slim Tra itional Wall Hoo s 30”, 36”, 42”, & 48”)
* A 1,200 CFM interior- or exterior-power ventilator should be used when installed over range/rangetop
with gas char-grill. Max duct run is 50 ft.
** It is recommended that the 1,500 CFM ventilator be used with longer duct runs. Max duct run is 75 ft.
NOTE: Maxi u a p rating for hoods includes reco ended ventilator kit rating; All products ust be
hard wired with 2-wire with ground. An interior- or exterior-power ventilator kit ust be purchased for
installation with all Designer hoods.
DTWS Slim Traditio al Wall Hoods
Descriptio 30” 36” 42” 48”
Duct cover wi th 12” (30.5 cm) 12” (30.5 cm) 12” (30.5 cm) 20” (50.8 cm)
Duct cover epth 12” (30.5 cm)
Duct cover height 21” (53.3 cm) to 33” (83.8 cm)
Number of lights 22 2 3
Number of filters 22 3 3
Interior ventilator kits DIV300/ DIV300/ DIV440 DIV880
DIV440 DIV440
Exterior ventilator kits DEV900 DEV900 DEV900 DEV1200*/
DEV1500**
Interior uct size 7” 7” 7” 10”
(17.8 cm) (17.8 cm) (17.8 cm) (25.4 cm)
Exterior uct size 10” (25.4 cm)
Interior—Maximum amps 1.7/3.2 1.7/3.2 3.2 5.6
Exterior—Maximum amps 6.6 6.6 6.6 4.3/5.1
66”min.
(167.6 cm)
to
72”max.
(182.9 cm)
30”min.
(76.2cm)
to
36”max.
(91.4cm)
36”
(91.4cm)
(DTWS Slim Tra itional Wall Hoo s)
NOTE: For best perfor ance, it is reco ended
that the botto of the hood be 30” (76.2 c ) to
36” (91.4 c ) above the countertop. These di ensions
provide for safe and efficient operation of the hood.

1918
120 V
power supply
5-9/16”
(14.3 cm)
A
5-1/8”
(13.0 cm)
11”
(27.9 cm)
8” (20.3 cm)*
dia. duct
location
1-1/8”
(2.9 cm)
9
A
30”W. 15-3/4” (40.0 cm)
36”W. 18-3/4” (47.6 cm)
42”W. 21-3/4” (55.2 cm)
120 V
7-7/8” (20.0 cm)
1-1/8” (2.9 cm)
6” (15.2 cm)
19”
(48.3 cm)
1
23-15/16”
(60.1 cm)
10” (25.4 cm)
dia. duct
location
900 or 1200 CFM Exterior Ventilator Installation
for 30”, 36” & 42” mo els
1200 or 1500 CFM Exterior Ventilator Installation
for 48” mo els
120 V
power supply
5-9/16”
(14.3 cm)
A
5-1/8”
(13.0 cm)
11”
(27.9 cm)
7” (17.8 cm)
dia. duct
location
3
1-1/8”
(2.9 cm)
A
30”W. 15-3/4” (40.0 cm)
36”W. 18-3/4” (47.6 cm)
42”W. 21-3/4” (55.2 cm)
300 or 440 CFM Interior Ventilator Installation
for 30”, 36”, & 42” mo els
(DTWS Slim Tra itional Wall Hoo s) (DTWS Slim Tra itional Wall Hoo s)
Exterior Ventilator DimensionsInterior Ventilator Dimensions
10” (25.4 cm)
dia. duct
location
120 V
7-7/8” (20.0 cm)
1-1/8” (2.9 cm)
6” (15.2 cm)
19”
(48.3 cm)
8
23-15/16”
(60.1 cm)
Top view
Top view
Top view
Top view
880 CFM Interior Ventilator Installation
for 48” mo els
* 8” to 10”
transition to be
acquired locally.

2120
DTWL/DTWN Tall Traditio al Wall Hoods—Ledgeless & Ledge
Descriptio 30” 36” 42” 48”
Duct cover wi th 29-7/8” (75.9 cm) 35-7/8” (91.1 cm) 41-7/8” (106.4 cm) 47-7/8” (121.6 cm)
Duct cover epth 12” (30.5 cm)
Duct cover height 12” (30.5 cm)
Number of lights 2223
Number of filters 2233
Interior ventilator kits VIV300/ VIV300/ VIV600/ VIV1200*
VIV600/VIV1200* VIV600/VIV1200* VIV1200*
Exterior ventilator kits VEV900/1200* VEV900/1200* VEV900/1200* VEV1200*/1500**
Interior uct size 7” (17.8 cm) 7” (17.8 cm) 7” (17.8 cm) 10” (25.4 cm)
Exterior uct size 10” (25.4 cm)
Interior—Maximum amps 2.4/4.6/6.6 2.4/4.6/6.6 4.6/6.6 7.0
Exterior—Maximum amps 6.6/3.9 6.6/3.9 6.6/3.9 4.3/5.1
* A 1,200 CFM interior- or exterior-power ventilator should be used when installed over range/rangetop
with gas char-grill. Max duct run is 50 ft.
** It is recommended that the 1,500 CFM ventilator be used with longer duct runs. Max duct run is 75 ft.
NOTE: Maxi u a p rating for hoods includes reco ended ventilator kit rating; All products ust be
hard wired with 2-wire with ground. An interior- or exterior-power ventilator kit ust be purchased for
installation with all Designer hoods.
24”
(61.0cm)
B
A
18”
(45.7cm)
12”
(30.5cm)
12”
(30.5cm)
B (Hood width)
30”W. 29-7/8” (75.9 cm)
36”W. 35-7/8” (91.1 cm)
42”W. 41-7/8” (106.4 cm)
48”W. 47-7/8” (121.6 cm)
A (Duct cover width)
30”W. 29-7/8” (75.9 cm)
36”W. 35-7/8” (91.1 cm)
42”W. 41-7/8” (106.4 cm)
48”W. 47-7/8” (121.6 cm)
2”
(5.1 cm)
Ledge modelsonly
25-1/2”
(64.8cm)
Ledge modelsonly
(DTWL/DTWN Tall Tra itional Wall Hoo s—
Le geless & Le ge 30”, 36”, 42”, & 48”)
Dimensions & Specifications Clearance Dimensions
30”min.
(76.2cm)
to
36”max.
(91.4cm)
66”min.
(167.6 cm)
to
72”max.
(182.9 cm)
36”
(91.4cm)
NOTE: Optional duct cover sold separately.
(DTWL/DTWN Tall Tra itional Wall Hoo s)
NOTE: For best perfor ance, it is reco ended
that the botto of the hood be 30” (76.2 c ) to
36” (91.4 c ) above the countertop. These di ensions
provide for safe and efficient operation of the hood.

Exterior Ventilator Dimensions
23
Interior Ventilator Dimensions
22
23-15/16”
(60.8 cm)
5/8” (1.6 cm)
18-3/4” (47.6 cm)
8-3/8”
(21.3 cm)
120
V
9-1/2”
(24.1 cm)
9-1/4”
(23.5 cm)
5-1/2”
(14.0 cm)
Tall Traditional
with Ledge
Tall Traditional
Ledgeless
10” (24.8 cm) dia.
duct location
18-3/4” (47.6 cm)
4-5/8”
(11.7 cm) 9-1/8”
(23.2 cm)
A
9-5/8”
(24.4 cm)
9-3/8”
(23.8 cm)
3
Tall Traditional
with Ledge
120
V
Tall Traditional
Ledgeless
A (Duct diameter)
VIV300 7” (17.8 cm)/10“ (25.4 cm)
VIV600 7” (17.8 cm)/10“ (25.4 cm)
VIV1200 10” (25.4 cm)
23-15/16”
(60.8 cm)
E
8-3/16”
(20.7 cm)
5-15/16”
(15.1 cm)
6-5/8”
(16.8 cm)
3” (7.62 cm)
2-1/2” (6.35 cm)
Tall Traditional
with Ledge
120
V
Tall Traditional
Ledgeless
10” (24.8 cm) dia.
duct location
A
5-5/16”
(15.1 cm)
3”
(7.6 cm)
2-1/2”
(6.4 cm)
Tall Traditional
with Ledge
Tall Traditional
Ledgeless
120
V
10” (24.8 cm) dia.
duct location
3
8-1/4”
(20.9 cm)
6-7/16”
(16.4 cm)
A (Duct diameter)
30”W. 14-15/16” (37.9 cm)
36”W. 17-15/16 (45.6 cm)
42”W. 20-15/16” (56.2 cm)
900 or 1200 CFM Exterior Ventilator Installation
for 30”, 36”, & 42” mo els
1200 or 1500 CFM Exterior Ventilator Installation for 48” mo els
300, 600, or 1200 CFM Interior Ventilator Installation
for 30”, 36”, & 42” mo els
(DTWL/DTWN Tall Tra itional Wall Hoo s) (DTWL/DTWN Tall Tra itional Wall Hoo s)
1200 CFM Interior Ventilator Installation for 48” mo els
Top view
Top view
Top view
Top view

Clearance Dimensions
25
Dimensions & Specifications
24
DSWB Box Wall Hoods
Descriptio 30” 36” 42” 48”
Duct cover wi th 29-7/8” (75.9 cm) 35-7/8” (91.1 cm) 41-7/8” (106.4 cm) 47-7/8” (121.6 cm)
Duct cover epth 12” (30.5 cm)
Duct cover height 21” (53.3 cm) or 33” (83.8 cm) or 44” (111.8 cm)
Number of lights 2223
Number of filters 2233
Interior ventilator kits DIV300/440 DIV300/440 DIV440 DIV880
Exterior ventilator kits DEV900 DEV900 DEV900 DEV1200*/1500**
Interior uct size 7” (17.8 cm) 7” (17.8 cm) 7” (17.8 cm) 10” (25.4 cm)
Exterior uct size 10” (25.4 cm)
Interior—maximum amps 1.7/3.2 1.7/3.2 3.2 5.6
Exterior—maximum amps 6.6 6.6 6.6 4.3/5.1
* A 1,200 CFM interior- or exterior-power ventilator should be used when installed over range/rangetop
with gas char-grill. Max duct run is 50 ft.
** It is recommended that the 1,500 CFM ventilator be used with longer duct runs. Max duct run is 75 ft.
NOTE: Maximum amp rating for hoods includes recommended ventilator kit rating; All products must be
hard wired with 2-wire with ground. An interior- or exterior-power ventilator kit must be purchased for
installation with all Designer high hoods.
C (Duct height)
30”W.
36”W.
42”W.
48”W.
21” (53.3cm)
or
33” (83.8 cm)
or
44” (111.8 cm)
24”
(61.0cm)
B
A
C
9”
(22.9cm)
12”
(30.5cm)
A (Duct cover width)
30”W. 29-7/8” (75.9 cm)
36”W. 35-7/8” (91.1 cm)
42”W. 41-7/8” (106.4 cm)
48”W. 47-7/8” (121.6 cm)
B (Hood width)
30”W. 29-7/8” (75.9 cm)
36”W. 35-7/8” (91.1 cm)
42”W. 41-7/8” (106.4 cm)
48”W. 47-7/8” (121.6 cm)
(DSWB Box Wall Hoo s 30”, 36”, 42”, & 48”)
30”min.
(76.2cm)
to
36”max.
(91.4cm)
66”min.
(167.6 cm)
to
72”max.
(182.9 cm)
36”
(91.4cm)
NOTE: Duct cover sold separately—Required for Installation.
(DSWB Box Wall Hoo s)
NOTE: For best perfor ance, it is reco ended
that the botto of the hood be 30” (76.2 c ) to
36” (91.4 c ) above the countertop. These di ensions
provide for safe and efficient operation of the hood.

Exterior Ventilator Dimensions
27
Interior Ventilator Dimensions
26
10” (25.4 cm)
dia. duct
location
120 V
7-7/8” (20.0 cm)
1-1/8” (2.9 cm)
6” (15.2 cm)
19”
(48.3 cm)
8
23-15/16”
(60.1 cm)
120 V
power supply
5-9/16”
(14.3 cm)
A
5-1/8”
(13.0 cm)
11”
(27.9 cm)
7” (17.8 cm)
dia. duct
location
3
1-1/8”
(2.9 cm)
A
30”W. 15-3/4” (40.0 cm)
36”W. 18-3/4” (47.6 cm)
42”W. 21-3/4” (55.2 cm)
10” (25.4 cm)
dia. duct
location
120 V
7-7/8” (20.0 cm)
1-1/8” (2.9 cm)
6” (15.2 cm)
19”
(48.3 cm)
1
23-15/16”
(60.1 cm)
120 V
power supply
5-9/16”
(14.3 cm)
A
5-1/8”
(13.0 cm)
11”
(27.9 cm)
8” (20.3 cm)*
dia. duct
location
1-1/8”
(2.9 cm)
9
A
30”W. 15-3/4” (40.0 cm)
36”W. 18-3/4” (47.6 cm)
42”W. 21-3/4” (55.2 cm)
900 or 1200 CFM Exterior Ventilator Installation
for 30”, 36”, & 42” mo els
1200 or 1500 CFM Exterior Ventilator Installation
for 48” mo els
300, 440 CFM Interior Ventilator Installation
for 30”, 36”, & 42” mo els
(DSWB Box Wall Hoo s) (DSWB Box Wall Hoo s)
880 CFM Interior Ventilator Installation
for 48” mo els
Top view
Top view
Top view
Top view
*8” to 10”
transition to be
acquired locally.

2928
Planning Information
Plan where the uct work will be locate . Install
proper-size uct work, roof, or wall cap for the
type of blower you are using. A just your
measurements for various heights of ceilings,
soffits, cabinets, or ranges/rangetops.
Proper installation of ducting is extremely
important to ensure maximum performance
from any ventilation product.
• All CFMs are base on tests at 0.1 static pressure:
without applying static pressure, CFM woul be
greatly overstate .
• Straight runs an gra ual turns are best; for
example, each 90º elbow is equivalent to 5-10 feet
(1.52-3.05 cm) of straight run.
• Never use flexible uct; it creates back pressure/air
turbulence an greatly re uces performance.
• Proper performance is epen ent on proper
ucting; make sure that a qualifie an traine
installer is use .
• Check with a qualifie an traine installer or local
co es for makeup air requirement, if any.
• Max. amp rating for hoo s inclu es recommen e
ventilator kit rating; all pro ucts must be har
wire irect with 2-wire with groun .
Check Framing
NOTE: Because of the weight of the hood ake sure
that the ounting screws are driven into the fra ing
and not just the drywall. It ay be necessary to drill
additional holes in the canopy for proper align ent.
So e hoods require a locally supplied wood strip for
ounting. Check installation procedure of your hood
on page 34 to deter ine if a wood strip is required.
Electrical Supply
Run 120 VAC electrical wiring from service panel
to installation location. See specification pages
for the maximum amp requirements.
Roof cap
7” round duct
Duct cover or soffit
300 or 600 CFM
single blower
interior-power
typical ductwork
Hood
Roof cap
10” round duct
Duct cover or soffit
1200 CFM
single blower
interior power
typical ductwork
Hood
Exterior blower
10” round duct
Duct cover or soffit
900, 1200, or
1500 CFM
exterior power
typical ductwork
Hood
Duct Duct cover or soffit
Wall installation
exterior power
typical ductwork
NOTE: Wall exhaust must be a minimum of 24” (61.0 cm)
from ground. This may vary depending on local codes
and geographic location.
Hood
Wall cap
Installation (DCH 12”H. Classic Chimney Wall Hoo s w/Stan ar Ventilator)
1
Check amper for unrestricte movement, a just if
necessary.
2
3
Attach transition to amper. Seal with aluminum tape.
Flip hoo over an remove electrical box cover.
1
4
2
1
5
Insert 6” of electrical wiring through the top of vent
hoo an secure using wiring restrain. Refer to local
co es.
Sli e uct over transition an tape aroun joint.
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK, OR INJURY TO PERSONS, OBSERVE THE
FOLLOWING
• Use this unit only in the manner inten e by the
manufacturer. If you have any questions, contact
the manufacturer.
• Before servicing or cleaning unit, switch power off
at service panel an lock service panel to prevent
power from being switche on acci entally. When
the service isconnecting means cannot be locke ,
securely fasten a prominent warning evice, such
as a tag, to the service panel.

3130
CAUTION: If not using a uct cover, using screws
provi e make sure top mounting screws are secure
into soffit or cabinet frame. Use a itional mounting
screws, if necessary.
Connect black to black, white to white, an the
green/bare wire un er the green screw.
NOTE: Housing wiring ust be properly installed for
wiring to be correct when wiring unit.
5/16”
nutdriver
BLACK
BLACK
WHITE
WHITE
GREEN
BARE OR GREEN
7
Replace electrical box cover. Make connection to
breaker box.
1
2
3
9
1
1
2
8
Sli e spacer front over front lip. Push spacer rear up,
then sli e back over rear lip.
Sli e filter front over front lip. Push filter rear up, then
sli e back over rear lip.
2
1
3
10
3
4
2
Place uct cover top insi e uct cover base an lower until
esire height is foun . Mark height. Use the retaining nuts
an bolts to fasten in place from the insi e an remove tape.
Sli e uct cover in place an fasten from insi e canopy
using the sheet metal screws provi e .
1
2
Measure istance from ceiling to canopy. Tape to avoi scratching.
Duct Cover Option (DCH 12”H. Classic Chimney Wall Hoo s w/Stan ar Ventilator)
CAUTION: Secure vent hoo to wall using screws
provi e . Use a itional mounting screws an wall
anchors, if necessary.
6
5/16”
nutdriver
2
1
3
11
Sli e filter front over front lip. Push filter rear up, then
sli e back over rear lip.

32 33
CAUTION: Secure vent hoo . Make sure mounting
screws are secure into framing using a itional
mounting screws an wall anchors, if necessary.
Connect black to black, white to white, an the
green/bare wire un er the green screw.
NOTE: Housing wiring ust be properly installed for
wiring to be correct when wiring unit.
7
5/16”
nutdriver
BLACK
BLACK
WHITE
WHITE
GREEN
BARE OR GREEN
8
3
4
5
Attach with screws an lock washers provi e . Attach with screws.
Remove electrical box cover.
1
6
2
Flip hoo over. Insert 6” of electrical wiring through the
top of vent hoo an secure using wiring restrain. Refer
to local co es.
Replace electrical box cover. Make connection to
breaker box.
1
1
2
9
10
Sli e filter front over front lip. Push filter rear up, then
sli e back over rear lip.
2
1
11
3
Assemble brackets to mesh filters an insert charcoal
filters.
2
1
2
Remove amper an iscar with transition. Turn recirculating unit upsi e own. Place vent hoo
upsi e own on recirculating unit.
Installation (DCH 12”H. Classic Chimney Wall Hoo s w/Recirculating Kit)
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK, OR INJURY TO PERSONS, OBSERVE THE
FOLLOWING
• Use this unit only in the manner inten e by the
manufacturer. If you have any questions, contact
the manufacturer.
• Before servicing or cleaning unit, switch power off
at service panel an lock service panel to prevent
power from being switche on acci entally. When
the service isconnecting means cannot be locke ,
securely fasten a prominent warning evice, such
as a tag, to the service panel.

3534
1-13/16”
(4.6cm)
1-1/2”x 3/4”
(3.8 cm) x (1.9 cm)
wood strip
1
5/16”
nut driver
Slot for
wood strip
2
5/16”
nut driver
Measure own 1-13/16 (4.6 cm) from esire height of
hoo an secure 1-1/2” x 3/4” woo strip (not
inclu e ) to wall using screws provi e .
Use a itional mounting screws to secure hoo to
woo strip.
Installation(DCWH/DCWN/DCWL Classic Chimney & DTWL/DTWN Tall Tra itional Wall Hoo s)
3
5/16”
nut driver
5/16”
nut driver
CAUTION: Secure vent hoo to wall using screws provi e .
Make sure mounting screws are secure into frame. Use
a itional mounting screws an wall anchors, if necessary.
CAUTION: If not using a uct cover, using screws provi e
make sure top mounting screws are secure into soffit or
cabinet frame. Use a itional mounting screws, if necessary.
To install ventillation kit
refer to ventillation kit
installation instructions.
1
2
3
4
Sli e filter front over front lip. Push filter rear up, then
sli e back over rear lip.
1
2
3
5
Sli e spacer front over front lip. Push spacer rear up,
then sli e back over rear lip.
1
2
3
6
Sli e filter front over front lip. Push filter rear up, then
sli e back over rear lip.
1
2
Measure istance from ceiling to canopy. Tape to avoi scratching.
Duct Cover Option (DCWH/DCWN/DCWL Classic Chimney Wall Hoo s)
Sli e filter front over front lip. Push filter rear up, then
sli e back over rear lip.
2
1
3
13
Sli e spacer front over front lip. Push spacer rear up,
then sli e back over rear lip.
2
1
3
12

3736
Installation (DTWS Slim Tra itional & DSWB Box Wall Hoo s)
1
1
2
2
Flip hoo over. Remove electrical box cover.
Insert 6” of electrical wiring through the top of vent hoo
an secure using wiring restrain. Refer to local co es.
3
5/16”
nutdriver
5/16”
nut driver
CAUTION: Using screws provi e secure vent hoo to wall.
Make sure mounting screws are secure into frame. Use
a itional mounting screws an wall anchors, if necessary.
CAUTION: If not using a uct cover, using screws
provi e make sure top mounting screws are secure
into soffit or cabinet frame. Use a itional mounting
screws, if necessary.
BLACK
BLACK
WHITE
WHITE
GREEN
BARE OR GREEN
4
1
1
2
5
Connect black to black, white to white, an the
green/bare wire un er the green screw.
NOTE: Housing wiring ust be properly installed for
wiring to be correct when wiring unit.
Replace electrical box cover. Make connection to
breaker box.
1
2
2
Measure istance from ceiling to canopy. Sli e uct cover in place an fasten from insi e canopy
using the sheet metal screws provi e .
Duct Cover Option (DTWL/DTWN Tall Tra itional Wall Hoo s)
To install ventillation kit
refer to ventillation kit
installation instructions.
3
4
2
Place uct cover top insi e uct cover base an lower until
esire height is foun . Mark height. Use the retaining nuts
an bolts to fasten in place from insi e an remove tape.
Sli e uct cover in place an fasten from insi e canopy
using the sheet metal screws provi e .
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK, OR INJURY TO PERSONS, OBSERVE THE
FOLLOWING
• Use this unit only in the manner inten e by the
manufacturer. If you have any questions, contact
the manufacturer.
• Before servicing or cleaning unit, switch power off
at service panel an lock service panel to prevent
power from being switche on acci entally. When
the service isconnecting means cannot be locke ,
securely fasten a prominent warning evice, such
as a tag, to the service panel.

3938
3
4
2
Place uct cover top insi e uct cover base an lower until
esire height is foun . Mark height. Use the retaining nuts
an bolts to fasten in place from insi e an remove tape.
Sli e uct cover in place an fasten from insi e canopy
using the sheet metal screws provi e .
1
2
Sli e rails into openings in uct cover.
3
4
Sli e rails out an position in elbows. Fasten uct cover to canopy with screws provi e .
Lower uct cover into position on canopy.
Duct Cover Require (DSWB Box Wall Hoo s Only)
2
1
3
7
1
2
1
2
3
8
Sli e filter front over front lip. Push filter rear up, then
sli e back over rear lip.
Sli e spacer front over front lip. Push spacer rear up,
then sli e back over rear lip. NOTE: Nu ber of spacers
and baffles ay vary by odel.
Duct Cover Option (DTWS Slim Tra itional Wall Hoo s)
Tape to avoi scratching.
Measure istance from ceiling to canopy.
1
2
3
6
Sli e filter front over front lip. Push filter rear up, then
sli e back over rear lip.