Viotek GN32DR User manual

ORCURVED GAMING MONIT
USER MANUAL
GN32DR
In order to continue serving our customers and providing the best products, our product information
including our user manuals may receive updates from time to time. Please check our website for the
latest user manuals and product materials. Ver 1.0 7/30/18

2
Table of Contents
Section 1: Safety Precautions................................................................3
Section 2: Box Contents.........................................................................4
Section 3: Product Overview .................................................................5
3.1 – Monitor Buttons .........................................................................5
3.2 – Monitor Ports.............................................................................5
Section 4: Stand Installation..................................................................6
Section 5: Wall Mounting........................................................................8
Section 6: Connectivity Options ...........................................................9
6.1 – Connecting the Power Cable.....................................................9
6.2 – Connecting Your Earphones .....................................................9
6.3 – DP Connectivity ........................................................................10
6.4 – HDMI Connectivity ....................................................................10
6.5 – DVI Connectivity .......................................................................10
Section 7: Basic Operation ....................................................................11
Section 8: Indicator Light .......................................................................11
Section 9: OSD ........................................................................................12
9.1 – OSD Menu Functions ................................................................13
Section 10: ECO Modes and Gameplus Switching..............................14
Section 11: Troubleshooting ..................................................................15
11.1 – General Problems ....................................................................15
11.2 – PIP (Picture in Picture) Input Information ................................16
11.3 – PBP (Picture by Picture) Resolution Information.....................16
Section 12: Information .........................................................................16
12.1 – Specications ..........................................................................16
12.2 – Resolution Compatibility for DVI/DP .......................................17
Section 13: 1 Year Limited Hardware Warranty ...................................17

3
Section 1: Safety Precautions
Read and observe the following warnings and information below.
1. Before cleaning, always unplug your monitor. It is recommended that you use dry cloth or
lightly damp cloth to clean your monitor. Dry cloth is, however, the safest. If using damp
cloth, wait for your monitor to completely dry before plugging it in again.
2. Do not use alcohol or ammonia-based cleaner and/or liquids to clean your monitor.
3. This monitor features ventilation openings on the back of the unit. Avoid blocking these
openings to prevent the monitor from overheating.
4. Avoid placing this monitor near any heat sources e.g: portable heaters or heating vents,
as this may cause damage to your monitor.
5. Do not spray cleaner and or any kind of liquid directly onto the monitor’s screen or any
part of the monitor.
6. Do not insert anything into any part of the monitor especially the ventilation openings.
7. Always make sure your monitor is placed on a secure, level surface to prevent it from
falling and sustaining damage.
8. Unplug your monitor during any extended periods of non-use.
9. Do not place heavy items on the monitor or monitor cables.
10. Do not attempt to disassemble or remove parts from the monitor. Any disassembly or
modication etc. not performed by an authorized technician can result in damage to the
monitor and/or possible exposure to high voltage electricity which may lead to serious
injury or death.
VIOTEK®shall not be held responsible for injury or damage of products or persons due to
failure to adhere to the aforementioned precautions or any others noted hereafter.

4
Section 2: Box Contents
Monitor x 1 Stand Stem x 1
(with Attached Bracket)
Stand Base x 1 Cover Base x 1
Cover x 1
Power Cable x 1
(AC 100-240V, 50/60Hz)
NO. 2 Screws x 3 NO. 3 Screws x 4
(for Wall Mounting)
NO. 1 Screw x 1 DP Cable x 1
Screwdriver x 1 Allen Key x 1 User Manual x 1
Note: The NO. 3 Screws come in two sizes: 26mm x 2 and 31mm x 2.
26mm
31mm

5
Section 3: Product Overview
3.1 – Monitor Buttons
8 Audio Output:Insert the audio cable for output of audio signals.
9 DP Connector: Insert one end of the DP cable into the computer’s DP output and
connect the other end to the monitor’s DP port.
10 HDMI Connector: Insert one end of the HDMI cable into the computer’s HDMI output
and connect the other end to the monitor’s HDMI port.
11 DVI Connector: Insert one end of the DVI cable into the computer’s DVI output and
connect the other end to the monitor’s DVI port.
8 9 10 11
1 3 4 5 6 72
1 Power Connector: Insert the power cable to supply power to the monitor.
2 M Menu Button: Press to display the OSD menu or enter sub-menus.
3 Down Button: Press to move down in the menus.
4 Up Button: Press to move up in the menus.
5 E Exit Button:Press to exit.
6 Power Button: Press to turn the monitor on/off.
7 LED Indicator: Changes colors to indicate status. Refer to Section 8.
The E button can also be used to switch between “Limit” and “Full” color gamuts when
a compatible graphics card and either HDMI or DP connections are in use.
3.2 – Monitor Ports

6
Section 4: Stand Installation
Keep the foam underneath the monitor before attaching the stand.
1. Open the package, take out the product with foam still attached, and gently place it on a
desktop or table.
Monitor
Stand Base
Foam
Foam
Stand Stem
2. Take out the two main parts of the stand and remove the foam covering the top of the
monitor. Next, use the included allen key and the NO.1 screw to fasten the base to the
stem.
Stand Base
Stand Stem
NO. 1 Screw (1x)
Bracket
3. Take out the cover base, insert it into the stand near the bottom, and secure it with the NO.
2 screws. Next, place the cover over the cover base and press lightly to secure.
NO. 2 Screws (3x)
Cover
Cover Base
4. Remove the monitor from the remaining foam section.

7
5. Align the stand stem’s bracket with the opening on the back of the monitor. With the top
going in rst, carefully insert the bracket. The pieces should click into place.
6. Place the monitor on your desktop or table after completing installation and carefully pull
or push the screen up or down to adjust height.
7. If needed, the stand can easily be detached from the monitor by pressing the button near
the bracket. Make sure the monitor is laid on a at surface before removing the stem.
Button
To avoid damage, do not touch the screen when moving the monitor.

8
Section 5: Wall Mounting
This monitor ONLY includes screws which may be used when attaching the monitor to
a mount. No mount or mounting accessory is included.
1. Open the package, take out the product with foam still attached, and gently place it on a
desktop or table. Remove the extra parts and the foam covering the monitor. If the monitor
was already attached to the stand, remove the stand.
Monitor
Stand Base
Foam
Foam
Stand Stem
2. Remove the original screws from the opening in the back of the monitor.
3. Follow the directions received with your mount, stand, or accessory and install the monitor
on the wall or xture as desired. Remember to use the included NO. 3 screws when
attaching anything to the back of the monitor. Refer to the image ( 1) for correct screw
placement.
1
Use the 31mm
NO. 3 Screws x 2
Use the 26mm
NO. 3 Screws x 2
- Do not discard the original screws.
- Use only the NO. 3 screws provided for mounting. You MUST
follow the gure above for secure installation.
Mount
(Not included)

9
Section 6: Connectivity Options
6.1 – Connecting the Power Cable
Connect the included power cable to the power connector, and then plug the other end into an
wall outlet.
Power Cable
6.2 – Connecting Your Earphones
Plug in your earphones to receive audio signals from your monitor. If your earphones are
connected to the monitor and audio devices are connected to your computer at the same time,
the audio devices will not produce sound. Earphones and other audio devices not included.
Earphones (Not included)
Listening to loud audio for prolonged periods of time may permanently damage your
hearing.

10
6.3 – DP Connectivity
In order for the monitor to receive DP signals from the computer, use the DP cable to connect
the monitor to the computer.
DP
DP OUTPUT
DP Cable (Included)
6.4 – HDMI Connectivity
In order for the monitor to receive HDMI signals from the computer, use an HDMI cable to
connect the monitor to the computer.
HDMI OUTPUT
PC
HDMI Cable (Not included)
6.5 – DVI Connectivity
In order for the monitor to receive DVI signals from the computer, use a DVI cable to connect
the monitor to the computer.
DVI Cable (Not included)
DVI OUTPUT