TABLE OF CONTENTS
2 / 36 INST-002742 / Beco-DUO600
1 Introduction ...................................................................................................... 4
1.1 Delivery package ..................................................................................... 4
1.2 Incoming inspection ................................................................................. 5
2 Safety ................................................................................................................ 6
2.1 Explanation of symbols used ................................................................... 6
2.2 Intended use ............................................................................................ 7
2.3 Personnel................................................................................................. 8
2.3.1 Operators..................................................................................... 8
2.3.2 Maintenance staff ........................................................................ 8
2.4 Informal safety precautions...................................................................... 8
2.5 Preventing damage to equipment............................................................ 9
2.6 Organisational safety measures .............................................................. 9
2.7 Residual risks......................................................................................... 10
2.8 Transport and storage............................................................................ 11
3 Product description ....................................................................................... 12
4 Operation ........................................................................................................ 13
4.1 Initial commissioning.............................................................................. 13
4.1.1 Dismantling the dispenser ......................................................... 13
4.1.2 Installing the stator..................................................................... 15
4.1.3 Reassembling the dispenser ..................................................... 16
4.1.4 Information on the sensors ........................................................ 17
4.1.5 Connecting the dosing unit to the drive unit............................... 18
4.1.6 Feeding material and bleeding the dispenser for the first time .. 19
4.1.7 Calibration.................................................................................. 20
4.2 Switching on, starting dosing process.................................................... 20
4.3 Recommendations for problem-free operation ...................................... 21
4.4 Switching off, ending dosing process..................................................... 22
4.5 Decommissioning................................................................................... 23
4.6 Re-commissioning ................................................................................. 23
