Vision VN101PN User manual

High Resolution indoor / outdoor
Compact Night Vision Bullet Camera
Quick Installation Guide
VN101PN
CAUTION
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE THE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED PERSONNEL.
RISK OF ELECTRIC
SHOCK
Compact Night Vision Camera
QUICK INSTALLATION GUIDE
1. Precautions
•Please read the manual carefully before the installation in order to make use the
camera to be set up correctly and to have the best picture quality.
•Please keep the manual in good condition for your future reference and service
application.
4. Package
Compact Night Vision Camera
QUICK IN STALLATION GUIDE
Standard Cable-through type bracket
+ Special features
●
1/3” HIGH RESOLUTION SUPER SENSITIVE CCD
●
650TV Lines(Color)/ 700TVLines(B/W)
SmartIR and De moire
Standard
Cable-through type bracket
•Installation and services should only be carried out by an authorized personnel
according to local safety regulations.
•If any liquid or solid matter gets into the housing, immediately disconnect the
camera from power supply and have it checked by your authorized dealer before
reusing.
•Avoid installing the camera at extremely hot or cold places.
•If you are not a certified person, never try to dismantle the camera.
To avoid electric shock, never remove the screws or covers. There are no parts
inside that need maintenance by the user. All maintenance should be carried out
by qualified personnel.
•Avoid installing the camera at a place of high humidity.
•Avoid installing the camera at the place exposed to gas or oil.
•Keep the top glass of the lens always clean in order to obtain the best picture
Camera x 1
●
● 2D DNR / Dead pixelcompensation
●
Wide rangeof Auto WhiteBalance
Manual x 1
Tapping screws x 3
L-Wrench x 1
Plastic anchor x 3
+ Special features
●1/3” HIGH RESOLUTION SUPER SENSITIVE CCD
● 700TV Lines(Color)/ 750TV Lines(B/W)
● Smart IR and Demoire
● 2D DNR / Dead pixel compensation
quality all the time. Be careful not to be stained by fingerprint.
•Don't face the camera directly toward sunlight or sunlight reflecting area.
The sensor may go defective at this condition.
•Please give a special attention to keep the unit from dangerous drop or external
shock during the process of transportation or handling.
•Never try to touch the camera in wet hand. It may cause an electric shock.
•Do not expose the camera to radioactivity. It causes a serious damage on the
sensor.
5. Installation
(Option: Cable-through type bracket)
Tapping screws x 4 Plastic anchor x 4
● Wide range of Auto White Balance
5-1. How to install on the Wall / Ceiling
(Standard)
Dear Customers!
By selecting this product, you have decided to use a professional device that
guarantees highest quality and reliability. We would like to thank you very much for
your confidence and kindly ask you to read the following instructions carefully before
installation and operation in order to take full advantage of all quality features
regarding this product.
2. Limitation of liability
This publication is provided “AS IS” without warranty of any kind, either express or
implied, including but not limited to, the implied warranties of merchantability, fitness
for any particular purpose, or non-infringement of the third party's right.
This publication could include technical inaccuracies or typographical errors. Changes
are added to the information herein, at any time, for the improvements of
this publication and/or the corresponding product(s).
◆Wall
Screw (3-Ø4*30L)
L-Wrench
(A) (B)
Plastic anchor
The lighting flash with an arrowhead symbol, within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
INFORMATION
This equipment has been tested and found to comply with limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own expense.
3. Disclaimer of warranty
In no event shall seller be liable to any party or any person, except for
replacement or reasonable maintenance of the product, for the cases, including
but not limited to below:
(1) Any damage and loss, including without limitation, direct or indirect, special,
consequential or exemplary, arising out of or relating to the product;
(2) Personal injury or any damage caused by inappropriate use or negligent
operation of the user;
(3) Unauthorized disassemble, repair or modification of the product by the user;
(4) Inconvenience or any loss arising when images are not displayed, due to any
reason or cause including any failure or problem of the product;
(5) Any problem, consequential inconvenience, or loss or damage, arising out of
◆Celling
Plastic anchor
Screw (3-Ø4*30L)
(B)
L-Wrench
(A)
WARNING
Changes or modifications not expressly approved by the manufacturer could void the
user’s authority to operate the equipment.
CAUTION –To prevent electric shock and risk of the fire hazards
Do NOT use power source other than that specified.
Do NOT expose this appliance to rain or moisture.
This installation should be made by a qualified service person and should conform
to
all local codes.
the system combined by the devices of third party.
(6) Any claim or action for damages, brought by any person or organization being
photogenic subject, due to violation of privacy with the result of that
surveillance-camera's picture, including saved data, for some reason, becomes
public or is used for the purpose other than surveillance.
①Drill three screw holes on the wall / ceiling plate to fix three anchor (supplied)
in the holes.
②Fix the plastic anchors in the holes.
③Position the mounting bracket on the screw points.
@ Fix the mounting bracket by tightening the screws.
® Slightly loosen bolt(A),part(B) , then adjust the direction of the camera and then
tighen (A),(B) firmly.

High Resolution indoor / outdoor
Compact Night Vision Bullet Camera
QUICK INSTALLATION GUIDE
CAUTION
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE THE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED PERSONNEL.
RISK OF ELECTRIC
SHOCK
Compact Night Vision Camera
QUICK INSTALLATION GUIDE
1. Precautions
•Please read the manual carefully before the installation in order to make use the
camera to be set up correctly and to have the best picture quality.
•Please keep the manual in good condition for your future reference and service
application.
4. Package
Compact Night Vision Camera
QUICK IN STALLATION GUIDE
Standard Cable-through type bracket
+ Special features
●
1/3” HIGHRESOLUTION SUPER SENSITIVECCD
●
650TV Lines(Color)/ 700TVLines(B/W)
SmartIR and De moire
Standard Cable-through type bracket
•Installation and services should only be carried out by an authorized personnel
according to local safety regulations.
•If any liquid or solid matter gets into the housing, immediately disconnect the
camera from power supply and have it checked by your authorized dealer before
reusing.
•Avoid installing the camera at extremely hot or cold places.
•If you are not a certified person, never try to dismantle the camera.
To avoid electric shock, never remove the screws or covers. There are no parts
inside that need maintenance by the user. All maintenance should be carried out
by qualified personnel.
•Avoid installing the camera at a place of high humidity.
•Avoid installing the camera at the place exposed to gas or oil.
•Keep the top glass of the lens always clean in order to obtain the best picture
Camera x 1
●
●
2D DNR / Dead pixelcompensation
●
Wide rangeof Auto WhiteBalance
Manual x 1
Tapping screws x 3
L-Wrench x 1
Plastic anchor x 3
+ Special features
●1/3” HIGH RESOLUTION SUPER SENSITIVE CCD
● 700TV Lines(Color)/ 750TV Lines(B/W)
● Smart IR and Demoire
● 2D DNR / Dead pixel compensation
quality all the time. Be careful not to be stained by fingerprint.
•Don't face the camera directly toward sunlight or sunlight reflecting area.
The sensor may go defective at this condition.
•Please give a special attention to keep the unit from dangerous drop or external
shock during the process of transportation or handling.
•Never try to touch the camera in wet hand. It may cause an electric shock.
•Do not expose the camera to radioactivity. It causes a serious damage on the
sensor.
5. Installation
(Option: Cable-through type bracket)
Tapping screws x 4 Plastic anchor x 4
● Wide range of Auto White Balance
5-1. How to install on the Wall / Ceiling
(Standard)
Dear Customers!
By selecting this product, you have decided to use a professional device that
guarantees highest quality and reliability. We would like to thank you very much for
your confidence and kindly ask you to read the following instructions carefully before
installation and operation in order to take full advantage of all quality features
regarding this product.
2. Limitation of liability
This publication is provided “AS IS” without warranty of any kind, either express or
implied, including but not limited to, the implied warranties of merchantability, fitness
for any particular purpose, or non-infringement of the third party's right.
This publication could include technical inaccuracies or typographical errors. Changes
are added to the information herein, at any time, for the improvements of
this publication and/or the corresponding product(s).
◆Wall
Screw (3-Ø4*30L)
L-Wrench
(A) (B)
Plastic anchor
The lighting flash with an arrowhead symbol, within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
INFORMATION
This equipment has been tested and found to comply with limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own expense.
3. Disclaimer of warranty
In no event shall seller be liable to any party or any person, except for
replacement or reasonable maintenance of the product, for the cases, including
but not limited to below:
(1) Any damage and loss, including without limitation, direct or indirect, special,
consequential or exemplary, arising out of or relating to the product;
(2) Personal injury or any damage caused by inappropriate use or negligent
operation of the user;
(3) Unauthorized disassemble, repair or modification of the product by the user;
(4) Inconvenience or any loss arising when images are not displayed, due to any
reason or cause including any failure or problem of the product;
(5) Any problem, consequential inconvenience, or loss or damage, arising out of
◆Celling
Plastic anchor
Screw (3-Ø4*30L)
(B)
L-Wrench
(A)
WARNING
Changes or modifications not expressly approved by the manufacturer could void the
user’s authority to operate the equipment.
CAUTION –To prevent electric shock and risk of the fire hazards
Do NOT use power source other than that specified.
Do NOT expose this appliance to rain or moisture.
This installation should be made by a qualified service person and should conform
to
all local codes.
the system combined by the devices of third party.
(6) Any claim or action for damages, brought by any person or organization being
photogenic subject, due to violation of privacy with the result of that
surveillance-camera's picture, including saved data, for some reason, becomes
public or is used for the purpose other than surveillance.
①Drill three screw holes on the wall / ceiling plate to fix three anchor (supplied)
in the holes.
②Fix the plastic anchors in the holes.
③Position the mounting bracket on the screw points.
@ Fix the mounting bracket by tightening the screws.
® Slightly loosen bolt(A),part(B) , then adjust the direction of the camera and then
tighen (A),(B) firmly.
CAUTION
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE THE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED PERSONNEL.
RISK OF ELECTRIC
SHOCK
Compact Night Vision Camera
QUICK INSTALLATION GUIDE
1. Precautions
•Please read the manual carefully before the installation in order to make use the
camera to be set up correctly and to have the best picture quality.
•Please keep the manual in good condition for your future reference and service
application.
4. Package
Compact Night Vision Camera
QUICK IN STALLATION GUIDE
Standard Cable-through type bracket
+ Special features
●
1/3” HIGH RESOLUTION SUPER SENSITIVE CCD
●
650TV Lines(Color)/ 700TVLines(B/W)
SmartIR and De moire
Standard
Cable-through type bracket
•Installation and services should only be carried out by an authorized personnel
according to local safety regulations.
•If any liquid or solid matter gets into the housing, immediately disconnect the
camera from power supply and have it checked by your authorized dealer before
reusing.
•Avoid installing the camera at extremely hot or cold places.
•If you are not a certified person, never try to dismantle the camera.
To avoid electric shock, never remove the screws or covers. There are no parts
inside that need maintenance by the user. All maintenance should be carried out
by qualified personnel.
•Avoid installing the camera at a place of high humidity.
•Avoid installing the camera at the place exposed to gas or oil.
•Keep the top glass of the lens always clean in order to obtain the best picture
Camera x 1
●
●
2D DNR / Dead pixelcompensation
●
Wide rangeof Auto WhiteBalance
Manual x 1
Tapping screws x 3
L-Wrench x 1
Plastic anchor x 3
+ Special features
●1/3” HIGH RESOLUTION SUPER SENSITIVE CCD
● 700TV Lines(Color)/ 750TV Lines(B/W)
● Smart IR and Demoire
● 2D DNR / Dead pixel compensation
quality all the time. Be careful not to be stained by fingerprint.
•Don't face the camera directly toward sunlight or sunlight reflecting area.
The sensor may go defective at this condition.
•Please give a special attention to keep the unit from dangerous drop or external
shock during the process of transportation or handling.
•Never try to touch the camera in wet hand. It may cause an electric shock.
•Do not expose the camera to radioactivity. It causes a serious damage on the
sensor.
5. Installation
(Option: Cable-through type bracket)
Tapping screws x 4 Plastic anchor x 4
● Wide range of Auto White Balance
5-1. How to install on the Wall / Ceiling
(Standard)
Dear Customers!
By selecting this product, you have decided to use a professional device that
guarantees highest quality and reliability. We would like to thank you very much for
your confidence and kindly ask you to read the following instructions carefully before
installation and operation in order to take full advantage of all quality features
regarding this product.
2. Limitation of liability
This publication is provided “AS IS” without warranty of any kind, either express or
implied, including but not limited to, the implied warranties of merchantability, fitness
for any particular purpose, or non-infringement of the third party's right.
This publication could include technical inaccuracies or typographical errors. Changes
are added to the information herein, at any time, for the improvements of
this publication and/or the corresponding product(s).
◆Wall
Screw (3-Ø4*30L)
L-Wrench
(A) (B)
Plastic anchor
The lighting flash with an arrowhead symbol, within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
INFORMATION
This equipment has been tested and found to comply with limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own expense.
3. Disclaimer of warranty
In no event shall seller be liable to any party or any person, except for
replacement or reasonable maintenance of the product, for the cases, including
but not limited to below:
(1) Any damage and loss, including without limitation, direct or indirect, special,
consequential or exemplary, arising out of or relating to the product;
(2) Personal injury or any damage caused by inappropriate use or negligent
operation of the user;
(3) Unauthorized disassemble, repair or modification of the product by the user;
(4) Inconvenience or any loss arising when images are not displayed, due to any
reason or cause including any failure or problem of the product;
(5) Any problem, consequential inconvenience, or loss or damage, arising out of
◆Celling
Plastic anchor
Screw (3-Ø4*30L)
(B)
L-Wrench
(A)
WARNING
Changes or modifications not expressly approved by the manufacturer could void the
user’s authority to operate the equipment.
CAUTION –To prevent electric shock and risk of the fire hazards
Do NOT use power source other than that specified.
Do NOT expose this appliance to rain or moisture.
This installation should be made by a qualified service person and should conform
to
all local codes.
the system combined by the devices of third party.
(6) Any claim or action for damages, brought by any person or organization being
photogenic subject, due to violation of privacy with the result of that
surveillance-camera's picture, including saved data, for some reason, becomes
public or is used for the purpose other than surveillance.
①Drill three screw holes on the wall / ceiling plate to fix three anchor (supplied)
in the holes.
②Fix the plastic anchors in the holes.
③Position the mounting bracket on the screw points.
@ Fix the mounting bracket by tightening the screws.
® Slightly loosen bolt(A),part(B) , then adjust the direction of the camera and then
tighen (A),(B) firmly.

CAUTION
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE THE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED PERSONNEL.
RISK OF ELECTRIC
SHOCK
Compact Night Vision Camera
QUICK INSTALLATION GUIDE
1. Precautions
•Please read the manual carefully before the installation in order to make use the
camera to be set up correctly and to have the best picture quality.
•Please keep the manual in good condition for your future reference and service
application.
4. Package
Compact Night Vis ion Camera
QUICK IN STALLATION GUIDE
Standard Cable-through type bracket
+ Special features
●
1/3” HIGHRESOLUTION SUPER SENSITIVECCD
●
650TV Lines(Color)/ 700TVLines(B/W)
SmartIR and De moire
Standard Cable-through type bracket
•Installation and services should only be carried out by an authorized personnel
according to local safety regulations.
•If any liquid or solid matter gets into the housing, immediately disconnect the
camera from power supply and have it checked by your authorized dealer before
reusing.
•Avoid installing the camera at extremely hot or cold places.
•If you are not a certified person, never try to dismantle the camera.
To avoid electric shock, never remove the screws or covers. There are no parts
inside that need maintenance by the user. All maintenance should be carried out
by qualified personnel.
•Avoid installing the camera at a place of high humidity.
•Avoid installing the camera at the place exposed to gas or oil.
•Keep the top glass of the lens always clean in order to obtain the best picture
Camera x 1
●
●
2D DNR / Dead pixelcompensation
● Wide rangeof Auto WhiteBalance
Manual x 1
Tapping screws x 3
L-Wrench x 1
Plastic anchor x 3
+ Special features
●1/3” HIGH RESOLUTION SUPER SENSITIVE CCD
● 700TV Lines(Color)/ 750TV Lines(B/W)
● Smart IR and Demoire
● 2D DNR / Dead pixel compensation
quality all the time. Be careful not to be stained by fingerprint.
•Don't face the camera directly toward sunlight or sunlight reflecting area.
The sensor may go defective at this condition.
•Please give a special attention to keep the unit from dangerous drop or external
shock during the process of transportation or handling.
•Never try to touch the camera in wet hand. It may cause an electric shock.
•Do not expose the camera to radioactivity. It causes a serious damage on the
sensor.
5. Installation
(Option: Cable-through type bracket)
Tapping screws x 4 Plastic anchor x 4
● Wide range of Auto White Balance
5-1. How to install on the Wall / Ceiling
(Standard)
Dear Customers!
By selecting this product, you have decided to use a professional device that
guarantees highest quality and reliability. We would like to thank you very much for
your confidence and kindly ask you to read the following instructions carefully before
installation and operation in order to take full advantage of all quality features
regarding this product.
2. Limitation of liability
This publication is provided “AS IS” without warranty of any kind, either express or
implied, including but not limited to, the implied warranties of merchantability, fitness
for any particular purpose, or non-infringement of the third party's right.
This publication could include technical inaccuracies or typographical errors. Changes
are added to the information herein, at any time, for the improvements of
this publication and/or the corresponding product(s).
◆Wall
Screw (3-Ø4*30L)
L-Wrench
(A) (B)
Plastic anchor
The lighting flash with an arrowhead symbol, within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
INFORMATION
This equipment has been tested and found to comply with limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own expense.
3. Disclaimer of warranty
In no event shall seller be liable to any party or any person, except for
replacement or reasonable maintenance of the product, for the cases, including
but not limited to below:
(1) Any damage and loss, including without limitation, direct or indirect, special,
consequential or exemplary, arising out of or relating to the product;
(2) Personal injury or any damage caused by inappropriate use or negligent
operation of the user;
(3) Unauthorized disassemble, repair or modification of the product by the user;
(4) Inconvenience or any loss arising when images are not displayed, due to any
reason or cause including any failure or problem of the product;
(5) Any problem, consequential inconvenience, or loss or damage, arising out of
◆Celling
Plastic anchor
Screw (3-Ø4*30L)
(B)
L-Wrench
(A)
WARNING
Changes or modifications not expressly approved by the manufacturer could void the
user’s authority to operate the equipment.
CAUTION –To prevent electric shock and risk of the fire hazards
Do NOT use power source other than that specified.
Do NOT expose this appliance to rain or moisture.
This installation should be made by a qualified service person and should conform
to
all local codes.
the system combined by the devices of third party.
(6) Any claim or action for damages, brought by any person or organization being
photogenic subject, due to violation of privacy with the result of that
surveillance-camera's picture, including saved data, for some reason, becomes
public or is used for the purpose other than surveillance.
①Drill three screw holes on the wall / ceiling plate to fix three anchor (supplied)
in the holes.
②Fix the plastic anchors in the holes.
③Position the mounting bracket on the screw points.
@ Fix the mounting bracket by tightening the screws.
® Slightly loosen bolt(A),part(B) , then adjust the direction of the camera and then
tighen (A),(B) firmly.

CAUTION
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE THE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED PERSONNEL.
RISK OF ELECTRIC
SHOCK
Compact Night Vision Camera
QUICK INSTALLATION GUIDE
1. Precautions
•Please read the manual carefully before the installation in order to make use the
camera to be set up correctly and to have the best picture quality.
•Please keep the manual in good condition for your future reference and service
application.
4. Package
Compact Night Vision Camera
QUICK IN STALLATION GUIDE
Standard Cable-through type bracket
+ Special features
●
1/3” HIGHRESOLUTION SUPER SENSITIVECCD
●
650TV Lines(Color)/ 700TVLines(B/W)
SmartIR and De moire
Standard Cable-through type bracket
•Installation and services should only be carried out by an authorized personnel
according to local safety regulations.
•If any liquid or solid matter gets into the housing, immediately disconnect the
camera from power supply and have it checked by your authorized dealer before
reusing.
•Avoid installing the camera at extremely hot or cold places.
•If you are not a certified person, never try to dismantle the camera.
To avoid electric shock, never remove the screws or covers. There are no parts
inside that need maintenance by the user. All maintenance should be carried out
by qualified personnel.
•Avoid installing the camera at a place of high humidity.
•Avoid installing the camera at the place exposed to gas or oil.
•Keep the top glass of the lens always clean in order to obtain the best picture
Camera x 1
●
●
2D DNR / Dead pixelcompensation
●
Wide rangeof Auto WhiteBalance
Manual x 1
Tapping screws x 3
L-Wrench x 1
Plastic anchor x 3
+ Special features
●1/3” HIGH RESOLUTION SUPER SENSITIVE CCD
● 700TV Lines(Color)/ 750TV Lines(B/W)
● Smart IR and Demoire
● 2D DNR / Dead pixel compensation
quality all the time. Be careful not to be stained by fingerprint.
•Don't face the camera directly toward sunlight or sunlight reflecting area.
The sensor may go defective at this condition.
•Please give a special attention to keep the unit from dangerous drop or external
shock during the process of transportation or handling.
•Never try to touch the camera in wet hand. It may cause an electric shock.
•Do not expose the camera to radioactivity. It causes a serious damage on the
sensor.
5. Installation
(Option: Cable-through type bracket)
Tapping screws x 4 Plastic anchor x 4
● Wide range of Auto White Balance
5-1. How to install on the Wall / Ceiling
(Standard)
Dear Customers!
By selecting this product, you have decided to use a professional device that
guarantees highest quality and reliability. We would like to thank you very much for
your confidence and kindly ask you to read the following instructions carefully before
installation and operation in order to take full advantage of all quality features
regarding this product.
2. Limitation of liability
This publication is provided “AS IS” without warranty of any kind, either express or
implied, including but not limited to, the implied warranties of merchantability, fitness
for any particular purpose, or non-infringement of the third party's right.
This publication could include technical inaccuracies or typographical errors. Changes
are added to the information herein, at any time, for the improvements of
this publication and/or the corresponding product(s).
◆Wall
Screw (3-Ø4*30L)
L-Wrench
(A) (B)
Plastic anchor
The lighting flash with an arrowhead symbol, within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
INFORMATION
This equipment has been tested and found to comply with limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own expense.
3. Disclaimer of warranty
In no event shall seller be liable to any party or any person, except for
replacement or reasonable maintenance of the product, for the cases, including
but not limited to below:
(1) Any damage and loss, including without limitation, direct or indirect, special,
consequential or exemplary, arising out of or relating to the product;
(2) Personal injury or any damage caused by inappropriate use or negligent
operation of the user;
(3) Unauthorized disassemble, repair or modification of the product by the user;
(4) Inconvenience or any loss arising when images are not displayed, due to any
reason or cause including any failure or problem of the product;
(5) Any problem, consequential inconvenience, or loss or damage, arising out of
◆Celling
Plastic anchor
Screw (3-Ø4*30L)
(B)
L-Wrench
(A)
WARNING
Changes or modifications not expressly approved by the manufacturer could void the
user’s authority to operate the equipment.
CAUTION –To prevent electric shock and risk of the fire hazards
Do NOT use power source other than that specified.
Do NOT expose this appliance to rain or moisture.
This installation should be made by a qualified service person and should conform
to
all local codes.
the system combined by the devices of third party.
(6) Any claim or action for damages, brought by any person or organization being
photogenic subject, due to violation of privacy with the result of that
surveillance-camera's picture, including saved data, for some reason, becomes
public or is used for the purpose other than surveillance.
①Drill three screw holes on the wall / ceiling plate to fix three anchor (supplied)
in the holes.
②Fix the plastic anchors in the holes.
③Position the mounting bracket on the screw points.
@ Fix the mounting bracket by tightening the screws.
® Slightly loosen bolt(A),part(B) , then adjust the direction of the camera and then
tighen (A),(B) firmly.

CAUTION
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE THE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED PERSONNEL.
RISK OF ELECTRIC
SHOCK
Compact Night Vision Camera
QUICK INSTALLATION GUIDE
1. Precautions
•Please read the manual carefully before the installation in order to make use the
camera to be set up correctly and to have the best picture quality.
•Please keep the manual in good condition for your future reference and service
application.
4. Package
Compact Night Vision Camera
QUICK IN STALLATION GUIDE
Standard Cable-through type bracket
+ Special features
●
1/3” HIGHRESOLUTION SUPER SENSITIVECCD
●
650TV Lines(Color)/ 700TVLines(B/W)
SmartIR and De moire
Standard Cable-through type bracket
•Installation and services should only be carried out by an authorized personnel
according to local safety regulations.
•If any liquid or solid matter gets into the housing, immediately disconnect the
camera from power supply and have it checked by your authorized dealer before
reusing.
•Avoid installing the camera at extremely hot or cold places.
•If you are not a certified person, never try to dismantle the camera.
To avoid electric shock, never remove the screws or covers. There are no parts
inside that need maintenance by the user. All maintenance should be carried out
by qualified personnel.
•Avoid installing the camera at a place of high humidity.
•Avoid installing the camera at the place exposed to gas or oil.
•Keep the top glass of the lens always clean in order to obtain the best picture
Camera x 1
●
●
2D DNR / Dead pixelcompensation
●
Wide rangeof Auto WhiteBalance
Manual x 1
Tapping screws x 3
L-Wrench x 1
Plastic anchor x 3
+ Special features
●1/3” HIGH RESOLUTION SUPER SENSITIVE CCD
● 700TV Lines(Color)/ 750TV Lines(B/W)
● Smart IR and Demoire
● 2D DNR / Dead pixel compensation
quality all the time. Be careful not to be stained by fingerprint.
•Don't face the camera directly toward sunlight or sunlight reflecting area.
The sensor may go defective at this condition.
•Please give a special attention to keep the unit from dangerous drop or external
shock during the process of transportation or handling.
•Never try to touch the camera in wet hand. It may cause an electric shock.
•Do not expose the camera to radioactivity. It causes a serious damage on the
sensor.
5. Installation
(Option: Cable-through type bracket)
Tapping screws x 4 Plastic anchor x 4
● Wide range of Auto White Balance
5-1. How to install on the Wall / Ceiling
(Standard)
Dear Customers!
By selecting this product, you have decided to use a professional device that
guarantees highest quality and reliability. We would like to thank you very much for
your confidence and kindly ask you to read the following instructions carefully before
installation and operation in order to take full advantage of all quality features
regarding this product.
2. Limitation of liability
This publication is provided “AS IS” without warranty of any kind, either express or
implied, including but not limited to, the implied warranties of merchantability, fitness
for any particular purpose, or non-infringement of the third party's right.
This publication could include technical inaccuracies or typographical errors. Changes
are added to the information herein, at any time, for the improvements of
this publication and/or the corresponding product(s).
◆Wall
Screw (3-Ø4*30L)
L-Wrench
(A) (B)
Plastic anchor
The lighting flash with an arrowhead symbol, within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
INFORMATION
This equipment has been tested and found to comply with limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own expense.
3. Disclaimer of warranty
In no event shall seller be liable to any party or any person, except for
replacement or reasonable maintenance of the product, for the cases, including
but not limited to below:
(1) Any damage and loss, including without limitation, direct or indirect, special,
consequential or exemplary, arising out of or relating to the product;
(2) Personal injury or any damage caused by inappropriate use or negligent
operation of the user;
(3) Unauthorized disassemble, repair or modification of the product by the user;
(4) Inconvenience or any loss arising when images are not displayed, due to any
reason or cause including any failure or problem of the product;
(5) Any problem, consequential inconvenience, or loss or damage, arising out of
◆Celling
Plastic anchor
Screw (3-Ø4*30L)
(B)
L-Wrench
(A)
WARNING
Changes or modifications not expressly approved by the manufacturer could void the
user’s authority to operate the equipment.
CAUTION –To prevent electric shock and risk of the fire hazards
Do NOT use power source other than that specified.
Do NOT expose this appliance to rain or moisture.
This installation should be made by a qualified service person and should conform
to
all local codes.
the system combined by the devices of third party.
(6) Any claim or action for damages, brought by any person or organization being
photogenic subject, due to violation of privacy with the result of that
surveillance-camera's picture, including saved data, for some reason, becomes
public or is used for the purpose other than surveillance.
①Drill three screw holes on the wall / ceiling plate to fix three anchor (supplied)
in the holes.
②Fix the plastic anchors in the holes.
③Position the mounting bracket on the screw points.
@ Fix the mounting bracket by tightening the screws.
® Slightly loosen bolt(A),part(B) , then adjust the direction of the camera and then
tighen (A),(B) firmly.

CAUTION
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE THE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED PERSONNEL.
RISK OF ELECTRIC
SHOCK
Compact Night Vision Camera
QUICK INSTALLATION GUIDE
1. Precautions
•Please read the manual carefully before the installation in order to make use the
camera to be set up correctly and to have the best picture quality.
•Please keep the manual in good condition for your future reference and service
application.
4. Package
Compact Night Vision Camera
QUICK IN STALLATION GUIDE
Standard Cable-through type bracket
+ Special features
●
1/3” HIGHRESOLUTION SUPER SENSITIVECCD
●
650TV Lines(Color)/ 700TVLines(B/W)
SmartIR and De moire
Standard Cable-through type bracket
•Installation and services should only be carried out by an authorized personnel
according to local safety regulations.
•If any liquid or solid matter gets into the housing, immediately disconnect the
camera from power supply and have it checked by your authorized dealer before
reusing.
•Avoid installing the camera at extremely hot or cold places.
•If you are not a certified person, never try to dismantle the camera.
To avoid electric shock, never remove the screws or covers. There are no parts
inside that need maintenance by the user. All maintenance should be carried out
by qualified personnel.
•Avoid installing the camera at a place of high humidity.
•Avoid installing the camera at the place exposed to gas or oil.
•Keep the top glass of the lens always clean in order to obtain the best picture
Camera x 1
●
● 2D DNR / Dead pixelcompensation
●
Wide rangeof Auto WhiteBalance
Manual x 1
Tapping screws x 3
L-Wrench x 1
Plastic anchor x 3
+ Special features
●1/3” HIGH RESOLUTION SUPER SENSITIVE CCD
● 700TV Lines(Color)/ 750TV Lines(B/W)
● Smart IR and Demoire
● 2D DNR / Dead pixel compensation
quality all the time. Be careful not to be stained by fingerprint.
•Don't face the camera directly toward sunlight or sunlight reflecting area.
The sensor may go defective at this condition.
•Please give a special attention to keep the unit from dangerous drop or external
shock during the process of transportation or handling.
•Never try to touch the camera in wet hand. It may cause an electric shock.
•Do not expose the camera to radioactivity. It causes a serious damage on the
sensor.
5. Installation
(Option: Cable-through type bracket)
Tapping screws x 4 Plastic anchor x 4
● Wide range of Auto White Balance
5-1. How to install on the Wall / Ceiling
(Standard)
Dear Customers!
By selecting this product, you have decided to use a professional device that
guarantees highest quality and reliability. We would like to thank you very much for
your confidence and kindly ask you to read the following instructions carefully before
installation and operation in order to take full advantage of all quality features
regarding this product.
2. Limitation of liability
This publication is provided “AS IS” without warranty of any kind, either express or
implied, including but not limited to, the implied warranties of merchantability, fitness
for any particular purpose, or non-infringement of the third party's right.
This publication could include technical inaccuracies or typographical errors. Changes
are added to the information herein, at any time, for the improvements of
this publication and/or the corresponding product(s).
◆Wall
Screw (3-Ø4*30L)
L-Wrench
(A) (B)
Plastic anchor
The lighting flash with an arrowhead symbol, within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
INFORMATION
This equipment has been tested and found to comply with limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own expense.
3. Disclaimer of warranty
In no event shall seller be liable to any party or any person, except for
replacement or reasonable maintenance of the product, for the cases, including
but not limited to below:
(1) Any damage and loss, including without limitation, direct or indirect, special,
consequential or exemplary, arising out of or relating to the product;
(2) Personal injury or any damage caused by inappropriate use or negligent
operation of the user;
(3) Unauthorized disassemble, repair or modification of the product by the user;
(4) Inconvenience or any loss arising when images are not displayed, due to any
reason or cause including any failure or problem of the product;
(5) Any problem, consequential inconvenience, or loss or damage, arising out of
◆Celling
Plastic anchor
Screw (3-Ø4*30L)
(B)
L-Wrench
(A)
WARNING
Changes or modifications not expressly approved by the manufacturer could void the
user’s authority to operate the equipment.
CAUTION –To prevent electric shock and risk of the fire hazards
Do NOT use power source other than that specified.
Do NOT expose this appliance to rain or moisture.
This installation should be made by a qualified service person and should conform
to
all local codes.
the system combined by the devices of third party.
(6) Any claim or action for damages, brought by any person or organization being
photogenic subject, due to violation of privacy with the result of that
surveillance-camera's picture, including saved data, for some reason, becomes
public or is used for the purpose other than surveillance.
①Drill three screw holes on the wall / ceiling plate to fix three anchor (supplied)
in the holes.
②Fix the plastic anchors in the holes.
③Position the mounting bracket on the screw points.
@ Fix the mounting bracket by tightening the screws.
® Slightly loosen bolt(A),part(B) , then adjust the direction of the camera and then
tighen (A),(B) firmly.

CAUTION
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE THE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED PERSONNEL.
RISK OF ELECTRIC
SHOCK
Compact Night Vision Camera
QUICK INSTALLATION GUIDE
1. Precautions
•Please read the manual carefully before the installation in order to make use the
camera to be set up correctly and to have the best picture quality.
•Please keep the manual in good condition for your future reference and service
application.
4. Package
Compact Night Vis ion Camera
QUICK IN STALLATION GUIDE
Standard Cable-through type bracket
+ Special features
●
1/3” HIGHRESOLUTION SUPER SENSITIVECCD
●
650TV Lines(Color)/ 700TVLines(B/W)
SmartIR and De moire
Standard Cable-through type bracket
•Installation and services should only be carried out by an authorized personnel
according to local safety regulations.
•If any liquid or solid matter gets into the housing, immediately disconnect the
camera from power supply and have it checked by your authorized dealer before
reusing.
•Avoid installing the camera at extremely hot or cold places.
•If you are not a certified person, never try to dismantle the camera.
To avoid electric shock, never remove the screws or covers. There are no parts
inside that need maintenance by the user. All maintenance should be carried out
by qualified personnel.
•Avoid installing the camera at a place of high humidity.
•Avoid installing the camera at the place exposed to gas or oil.
•Keep the top glass of the lens always clean in order to obtain the best picture
Camera x 1
●
● 2D DNR / Dead pixelcompensation
●
Wide rangeof Auto WhiteBalance
Manual x 1
Tapping screws x 3
L-Wrench x 1
Plastic anchor x 3
+ Special features
●1/3” HIGH RESOLUTION SUPER SENSITIVE CCD
● 700TV Lines(Color)/ 750TV Lines(B/W)
● Smart IR and Demoire
● 2D DNR / Dead pixel compensation
quality all the time. Be careful not to be stained by fingerprint.
•Don't face the camera directly toward sunlight or sunlight reflecting area.
The sensor may go defective at this condition.
•Please give a special attention to keep the unit from dangerous drop or external
shock during the process of transportation or handling.
•Never try to touch the camera in wet hand. It may cause an electric shock.
•Do not expose the camera to radioactivity. It causes a serious damage on the
sensor.
5. Installation
(Option: Cable-through type bracket)
Tapping screws x 4 Plastic anchor x 4
● Wide range of Auto White Balance
5-1. How to install on the Wall / Ceiling
(Standard)
Dear Customers!
By selecting this product, you have decided to use a professional device that
guarantees highest quality and reliability. We would like to thank you very much for
your confidence and kindly ask you to read the following instructions carefully before
installation and operation in order to take full advantage of all quality features
regarding this product.
2. Limitation of liability
This publication is provided “AS IS” without warranty of any kind, either express or
implied, including but not limited to, the implied warranties of merchantability, fitness
for any particular purpose, or non-infringement of the third party's right.
This publication could include technical inaccuracies or typographical errors. Changes
are added to the information herein, at any time, for the improvements of
this publication and/or the corresponding product(s).
◆Wall
Screw (3-Ø4*30L)
L-Wrench
(A) (B)
Plastic anchor
The lighting flash with an arrowhead symbol, within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
INFORMATION
This equipment has been tested and found to comply with limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own expense.
3. Disclaimer of warranty
In no event shall seller be liable to any party or any person, except for
replacement or reasonable maintenance of the product, for the cases, including
but not limited to below:
(1) Any damage and loss, including without limitation, direct or indirect, special,
consequential or exemplary, arising out of or relating to the product;
(2) Personal injury or any damage caused by inappropriate use or negligent
operation of the user;
(3) Unauthorized disassemble, repair or modification of the product by the user;
(4) Inconvenience or any loss arising when images are not displayed, due to any
reason or cause including any failure or problem of the product;
(5) Any problem, consequential inconvenience, or loss or damage, arising out of
◆Celling
Plastic anchor
Screw (3-Ø4*30L)
(B)
L-Wrench
(A)
WARNING
Changes or modifications not expressly approved by the manufacturer could void the
user’s authority to operate the equipment.
CAUTION –To prevent electric shock and risk of the fire hazards
Do NOT use power source other than that specified.
Do NOT expose this appliance to rain or moisture.
This installation should be made by a qualified service person and should conform
to
all local codes.
the system combined by the devices of third party.
(6) Any claim or action for damages, brought by any person or organization being
photogenic subject, due to violation of privacy with the result of that
surveillance-camera's picture, including saved data, for some reason, becomes
public or is used for the purpose other than surveillance.
①Drill three screw holes on the wall / ceiling plate to fix three anchor (supplied)
in the holes.
②Fix the plastic anchors in the holes.
③Position the mounting bracket on the screw points.
@ Fix the mounting bracket by tightening the screws.
® Slightly loosen bolt(A),part(B) , then adjust the direction of the camera and then
tighen (A),(B) firmly.

Problems
Troubleshooting
Nothing appears on the
screen.
· Please check that the power cord and line connection
between the camera and monitor are fixed properly.
· Please check that you have properly connected VIDEO
cable to the camera VIDEO output jack.
The image on the screen
is dim.
· Is lens stained with dirt? Clean your lens with soft,
clean cloth.
· Set the monitor to proper condition.
· If the camera is exposed to too strong light, change
the camera position.
The image on the screen
is dark.
· Adjust the contrast feature of the monitor.
·If you have an intermediate device,
set the 75Ω / Hi-Z properly
(Please check the impedance)
The camera is not working
properly, and the surface
of the camera is hot.
· Please check that you have properly connected the
camera to an appropriate power source.
The screen flickers
continually.
· Please check that direction of camera turns toward
the Sun.
MODEL
Model
Compact Night Vision Camera
Standard
Cable-through type bracket
Image Device
1/3" HIGH RESOLUTION SUPER SENSITIVE CCD
Effective Pixels
NTSC : 976(H)X494(V), PAL : 976(H)X582(V)
Scanning System
NTSC 525 Lines PAL 625 Lines 2:1 Interlaced
Synchronization
Internal
H.Resolution
700TV Lines (Color) / 750TV Lines (B/W)
Min. illumination
0lux (3lux at IR ON)
Video OUT
1.0 Vp-p / 75 ohm
S/N Ratio
More than 50db
Gain Control
AUTO
LENS
3.6mm, 4.3mm, 6mm board Lens
Shutter speed
AUTO
White Balance
ATW (2,500°K ~ 10,000°K)
Day&Night
AUTO (COLOR, B/W)
DPC
Power Source
Dead Pixel Compensation
12VDC
Power Consumption
Board Type : 90mA(IR OFF) /285mA(IR ON)
Viewable Distance
UP to 20M at Moonless Night
MTBF
20,000 hours
Operating Temp.
-10°C ~ 50°C
Storage Temp.
-20°C ~ 60°C
Measurement (mm)
69.7 x 123.6 x 77.4
69.7 x 178.5 x 79.4
Weight (Approx.g)
265g
400g
111.2
77.4
79.4
47.6
50
67.5
5. Installation
6. Troubleshooting 7. Dimension (mm)
(Option: Cable-through type bracket)
◆Wall
If there are problems in operating, please refer to the checklist below.
If the problem persists, please contact the agent where this product is purchased.
(Option: Cable-through type bracket)
69.7
67.7
50
(C) (B) (A)
◆Celling
178.5
144.6
(A)
(C)
(B)
①Drill three screw holes on the wall / ceiling plate to fix three anchor (supplyed)
in the holes.
②Fix the plastic anchors in the holes.
③Position the mounting bracket on the screw points.
® Fix the mounting bracket by tightening the screws.
® Slightly loosen bolt (A), (B) then adjust TILT (180°) and PAN (360°) of the camera
using a serration on the bracket and tighten the bolts firmly.
@ Slightly loosen bolt (C) then adjust ROTATE (360°) of the camera and tighten the
bolt firmly.
7. Dimension (mm)
(Standard)
69.7
123.6
99
8. Specification
5-2. 3-Axis Adjustment
(Standard) (Option: Cable-through type bracket)
TILT 90°
ROTATE 360°
PAN
360°
Pan bolt
65
TILT 180°
ROTATE 360°
PAN 360° Tilt
bolt
Rotation bolt
120°
* Specifications are subject to change without prior notice for improvement.
130612-1

Problems
Troubleshooting
Nothing appears on the
screen.
· Please check that the power cord and line connection
between the camera and monitor are fixed properly.
· Please check that you have properly connected VIDEO
cable to the camera VIDEO output jack.
The image on the screen
is dim.
· Is lens stained with dirt? Clean your lens with soft,
clean cloth.
· Set the monitor to proper condition.
· If the camera is exposed to too strong light, change
the camera position.
The image on the screen
is dark.
· Adjust the contrast feature of the monitor.
·If you have an intermediate device,
set the 75Ω / Hi-Z properly
(Please check the impedance)
The camera is not working
properly, and the surface
of the camera is hot.
· Please check that you have properly connected the
camera to an appropriate power source.
The screen flickers
continually.
· Please check that direction of camera turns toward
the Sun.
MODEL
Model
Compact Night Vision Camera
Standard
Cable-through type bracket
Image Device
1/3" HIGH RESOLUTION SUPER SENSITIVE CCD
Effective Pixels
NTSC : 976(H)X494(V), PAL : 976(H)X582(V)
Scanning System
NTSC 525 Lines PAL 625 Lines 2:1 Interlaced
Synchronization
Internal
H.Resolution
700TV Lines (Color) / 750TV Lines (B/W)
Min. illumination
0lux (3lux at IR ON)
Video OUT
1.0 Vp-p / 75 ohm
S/N Ratio
More than 50db
Gain Control
AUTO
LENS
3.6mm, 4.3mm, 6mm board Lens
Shutter speed
AUTO
White Balance
ATW (2,500°K ~ 10,000°K)
Day&Night
AUTO (COLOR, B/W)
DPC
Power Source
Dead Pixel Compensation
12VDC
Power Consumption
Board Type : 90mA(IR OFF) /285mA(IR ON)
Viewable Distance
UP to 20M at Moonless Night
MTBF
20,000 hours
Operating Temp.
-10°C ~ 50°C
Storage Temp.
-20°C ~ 60°C
Measurement (mm)
69.7 x 123.6 x 77.4
69.7 x 178.5 x 79.4
Weight (Approx.g)
265g
400g
111.2
77.4
79.4
47.6
50
67.5
5. Installation 6. Troubleshooting 7. Dimension (mm)
(Option: Cable-through type bracket)
◆Wall
If there are problems in operating, please refer to the checklist below.
If the problem persists, please contact the agent where this product is purchased.
(Option: Cable-through type bracket)
69.7
67.7
50
(C) (B) (A)
◆Celling
178.5
144.6
(A)
(C)
(B)
①Drill three screw holes on the wall / ceiling plate to fix three anchor (supplyed)
in the holes.
②Fix the plastic anchors in the holes.
③Position the mounting bracket on the screw points.
® Fix the mounting bracket by tightening the screws.
® Slightly loosen bolt (A), (B) then adjust TILT (180°) and PAN (360°) of the camera
using a serration on the bracket and tighten the bolts firmly.
@ Slightly loosen bolt (C) then adjust ROTATE (360°) of the camera and tighten the
bolt firmly.
7. Dimension (mm)
(Standard)
69.7
123.6
99
8. Specification
5-2. 3-Axis Adjustment
(Standard) (Option: Cable-through type bracket)
TILT 90°
ROTATE 360°
PAN
360°
Pan bolt
65
TILT 180°
ROTATE 360°
PAN 360° Tilt
bolt
Rotation bolt
120°
* Specifications are subject to change without prior notice for improvement.
130612-1

Problems Troubleshooting
Nothing appears on the
screen.
· Please check that the power cord and line connection
between the camera and monitor are fixed properly.
· Please check that you have properly connected VIDEO
cable to the camera VIDEO output jack.
The image on the screen
is dim.
· Is lens stained with dirt? Clean your lens with soft,
clean cloth.
· Set the monitor to proper condition.
· If the camera is exposed to too strong light, change
the camera position.
The image on the screen
is dark.
· Adjust the contrast feature of the monitor.
·If you have an intermediate device,
set the 75Ω / Hi-Z properly
(Please check the impedance)
The camera
is not working
properly, and the surface
of the camera is hot.
· Please check that you have properly connected the
camera to an appropriate power source.
The screen flickers
continually.
· Please check that direction of camera turns toward
the Sun.
MODEL
Model
Compact Night Vision Camera
Standard
Cable-through type bracket
Image Device
1/3" HIGH RESOLUTION SUPER SENSITIVE CCD
Effective Pixels
NTSC : 976(H)X494(V), PAL : 976(H)X582(V)
Scanning System
NTSC 525 Lines PAL 625 Lines 2:1 Interlaced
Synchronization
Internal
H.Resolution
700TV Lines (Color) / 750TV Lines (B/W)
Min. illumination
0lux (3lux at IR ON)
Video OUT
1.0 Vp-p / 75 ohm
S/N Ratio
More than 50db
Gain Control
AUTO
LENS
3.6mm, 4.3mm, 6mm board Lens
Shutter speed
AUTO
White Balance
ATW (2,500°K ~ 10,000°K)
Day&Night
AUTO (COLOR, B/W)
DPC
Power Source
Dead Pixel Compensation
12VDC
Power Consumption
Board Type : 90mA(IR OFF) /285mA(IR ON)
Viewable Distance
UP to 20M at Moonless Night
MTBF
20,000 hours
Operating Temp.
-10°C ~ 50°C
Storage Temp.
-20°C ~ 60°C
Measurement (mm)
69.7 x 123.6 x 77.4
69.7 x 178.5 x 79.4
Weight (Approx.g)
265g
400g
111.2
77.4
79.4
47.6
50
67.5
5. Installation
6. Troubleshooting
7. Dimension (mm)
(Option: Cable-through type bracket)
◆Wall
If there are problems in operating, please refer to the checklist below.
If the problem persists, please contact the agent where this product is purchased.
(Option: Cable-through type bracket)
69.7
67.7
50
(C) (B) (A)
◆Celling
178.5
144.6
(A)
(C)
(B)
①Drill three screw holes on the wall / ceiling plate to fix three anchor (supplyed)
in the holes.
②Fix the plastic anchors in the holes.
③Position the mounting bracket on the screw points.
® Fix the mounting bracket by tightening the screws.
® Slightly loosen bolt (A), (B) then adjust TILT (180°) and PAN (360°) of the camera
using a serration on the bracket and tighten the bolts firmly.
@ Slightly loosen bolt (C) then adjust ROTATE (360°) of the camera and tighten the
bolt firmly.
7. Dimension (mm)
(Standard)
69.7
123.6
99
8. Specification
5-2. 3-Axis Adjustment
(Standard) (Option: Cable-through type bracket)
TILT 90°
ROTATE 360°
PAN
360°
Pan bolt
65
TILT 180°
ROTATE 360°
PAN 360° Tilt
bolt
Rotation bolt
120°
* Specifications are subject to change without prior notice for improvement.
130612-1

Problems
Troubleshooting
Nothing appears on the
screen.
· Please check that the power cord and line connection
between the camera and monitor are fixed properly.
· Please check that you have properly connected VIDEO
cable to the camera VIDEO output jack.
The image on the screen
is dim.
· Is lens stained with dirt? Clean your lens with soft,
clean cloth.
· Set the monitor to proper condition.
· If the camera is exposed to too strong light, change
the camera position.
The image on the screen
is dark.
· Adjust the contrast feature of the monitor.
·If you have an intermediate device,
set the 75Ω / Hi-Z properly
(Please check the impedance)
The camera is not working
properly, and the surface
of the camera is hot.
· Please check that you have properly connected the
camera to an appropriate power source.
The screen flickers
continually.
· Please check that direction of camera turns toward
the Sun.
MODEL
Model
Compact Night Vision Camera
Standard
Cable-through type bracket
Image Device
1/3" HIGH RESOLUTION SUPER SENSITIVE CCD
Effective Pixels
NTSC : 976(H)X494(V), PAL : 976(H)X582(V)
Scanning System
NTSC 525 Lines PAL 625 Lines 2:1 Interlaced
Synchronization
Internal
H.Resolution
700TV Lines (Color) / 750TV Lines (B/W)
Min. illumination
0lux (3lux at IR ON)
Video OUT
1.0 Vp-p / 75 ohm
S/N Ratio
More than 50db
Gain Control
AUTO
LENS
3.6mm, 4.3mm, 6mm board Lens
Shutter speed
AUTO
White Balance
ATW (2,500°K ~ 10,000°K)
Day&Night
AUTO (COLOR, B/W)
DPC
Power Source
Dead Pixel Compensation
12VDC
Power Consumption
Board Type : 90mA(IR OFF) /285mA(IR ON)
Viewable Distance
UP to 20M at Moonless Night
MTBF
20,000 hours
Operating Temp.
-10°C ~ 50°C
Storage Temp.
-20°C ~ 60°C
Measurement (mm)
69.7 x 123.6 x 77.4
69.7 x 178.5 x 79.4
Weight (Approx.g)
265g
400g
111.2
77.4
79.4
47.6
50
67.5
5. Installation 6. Troubleshooting
7. Dimension (mm)
(Option: Cable-through type bracket)
◆Wall
If there are problems in operating, please refer to the checklist below.
If the problem persists, please contact the agent where this product is purchased.
(Option: Cable-through type bracket)
69.7
67.7
50
(C) (B) (A)
◆Celling
178.5
144.6
(A)
(C)
(B)
①Drill three screw holes on the wall / ceiling plate to fix three anchor (supplyed)
in the holes.
②Fix the plastic anchors in the holes.
③Position the mounting bracket on the screw points.
® Fix the mounting bracket by tightening the screws.
® Slightly loosen bolt (A), (B) then adjust TILT (180°) and PAN (360°) of the camera
using a serration on the bracket and tighten the bolts firmly.
@ Slightly loosen bolt (C) then adjust ROTATE (360°) of the camera and tighten the
bolt firmly.
7. Dimension (mm)
(Standard)
69.7
123.6
99
8. Specification
5-2. 3-Axis Adjustment
(Standard) (Option: Cable-through type bracket)
TILT 90°
ROTATE 360°
PAN
360°
Pan bolt
65
TILT 180°
ROTATE 360°
PAN 360° Tilt
bolt
Rotation bolt
120°
* Specifications are subject to change without prior notice for improvement.
130612-1

Problems
Troubleshooting
Nothing appears on the
screen.
· Please check that the power cord and line connection
between the camera and monitor are fixed properly.
· Please check that you have properly connected VIDEO
cable to the camera VIDEO output jack.
The image on the screen
is dim.
· Is lens stained with dirt? Clean your lens with soft,
clean cloth.
· Set the monitor to proper condition.
· If the camera is exposed to too strong light, change
the camera position.
The image on the screen
is dark.
· Adjust the contrast feature of the monitor.
·If you have an intermediate device,
set the 75Ω / Hi-Z properly
(Please check the impedance)
The camera is not working
properly, and the surface
of the camera is hot.
· Please check that you have properly connected the
camera to an appropriate power source.
The screen flickers
continually.
· Please check that direction of camera turns toward
the Sun.
MODEL
Model
Compact Night Vision Camera
Standard
Cable-through type bracket
Image Device
1/3" HIGH RESOLUTION SUPER SENSITIVE CCD
Effective Pixels
NTSC : 976(H)X494(V), PAL : 976(H)X582(V)
Scanning System
NTSC 525 Lines PAL 625 Lines 2:1 Interlaced
Synchronization
Internal
H.Resolution
700TV Lines (Color) / 750TV Lines (B/W)
Min. illumination
0lux (3lux at IR ON)
Video OUT
1.0 Vp-p / 75 ohm
S/N Ratio
More than 50db
Gain Control
AUTO
LENS
3.6mm, 4.3mm, 6mm board Lens
Shutter speed
AUTO
White Balance
ATW (2,500°K ~ 10,000°K)
Day&Night
AUTO (COLOR, B/W)
DPC
Power Source
Dead Pixel Compensation
12VDC
Power Consumption
Board Type : 90mA(IR OFF) /285mA(IR ON)
Viewable Distance
UP to 20M at Moonless Night
MTBF
20,000 hours
Operating Temp.
-10°C ~ 50°C
Storage Temp.
-20°C ~ 60°C
Measurement (mm)
69.7 x 123.6 x 77.4
69.7 x 178.5 x 79.4
Weight (Approx.g)
265g
400g
111.2
77.4
79.4
47.6
50
67.5
5. Installation 6. Troubleshooting 7. Dimension (mm)
(Option: Cable-through type bracket)
◆Wall
If there are problems in operating, please refer to the checklist below.
If the problem persists, please contact the agent where this product is purchased.
(Option: Cable-through type bracket)
69.7
67.7
50
(C) (B) (A)
◆Celling
178.5
144.6
(A)
(C)
(B)
①Drill three screw holes on the wall / ceiling plate to fix three anchor (supplyed)
in the holes.
②Fix the plastic anchors in the holes.
③Position the mounting bracket on the screw points.
® Fix the mounting bracket by tightening the screws.
® Slightly loosen bolt (A), (B) then adjust TILT (180°) and PAN (360°) of the camera
using a serration on the bracket and tighten the bolts firmly.
@ Slightly loosen bolt (C) then adjust ROTATE (360°) of the camera and tighten the
bolt firmly.
7. Dimension (mm)
(Standard)
69.7
123.6
99
8. Specification
5-2. 3-Axis Adjustment
(Standard) (Option: Cable-through type bracket)
TILT 90°
ROTATE 360°
PAN
360°
Pan bolt
65
TILT 180°
ROTATE 360°
PAN 360° Tilt
bolt
Rotation bolt
120°
* Specifications are subject to change without prior notice for improvement.
130612-1

Problems
Troubleshooting
Nothing appears on the
screen.
· Please check that the power cord and line connection
between the camera and monitor are fixed properly.
· Please check that you have properly connected VIDEO
cable to the camera VIDEO output jack.
The image on the screen
is dim.
· Is lens stained with dirt? Clean your lens with soft,
clean cloth.
· Set the monitor to proper condition.
· If the camera is exposed to too strong light, change
the camera position.
The image on the screen
is dark.
· Adjust the contrast feature of the monitor.
·If you have an intermediate device,
set the 75Ω / Hi-Z properly
(Please check the impedance)
The camera is not working
properly, and the surface
of the camera is hot.
· Please check that you have properly connected the
camera to an appropriate power source.
The screen flickers
continually.
· Please check that direction of camera turns toward
the Sun.
MODEL
Model
Compact Night Vision Camera
Standard Cable-through type bracket
Image Device
1/3" HIGH RESOLUTION SUPER SENSITIVE CCD
Effective Pixels
NTSC : 976(H)X494(V), PAL : 976(H)X582(V)
Scanning System NTSC 525 Lines PAL 625 Lines 2:1 Interlaced
Synchronization Internal
H.Resolution 700TV Lines (Color) / 750TV Lines (B/W)
Min. illumination
0lux (3lux at IR ON)
Video OUT
1.0 Vp-p / 75 ohm
S/N Ratio More than 50db
Gain Control AUTO
LENS 3.6mm, 4.3mm, 6mm board Lens
Shutter speed AUTO
White Balance
ATW (2,500°K ~ 10,000°K)
Day&Night AUTO (COLOR, B/W)
DPC
Power Source
Dead Pixel Compensation
12VDC
Power Consumption Board Type : 90mA(IR OFF) /285mA(IR ON)
Viewable Distance UP to 20M at Moonless Night
MTBF 20,000 hours
Operating Temp. -10°C ~ 50°C
Storage Temp. -20°C ~ 60°C
Measurement (mm) 69.7 x 123.6 x 77.4 69.7 x 178.5 x 79.4
Weight (Approx.g) 265g 400g
111.2
77.4
79.4
47.6
50
67.5
5. Installation 6. Troubleshooting 7. Dimension (mm)
(Option: Cable-through type bracket)
◆Wall
If there are problems in operating, please refer to the checklist below.
If the problem persists, please contact the agent where this product is purchased.
(Option: Cable-through type bracket)
69.7
67.7
50
(C) (B) (A)
◆Celling
178.5
144.6
(A)
(C)
(B)
①Drill three screw holes on the wall / ceiling plate to fix three anchor (supplyed)
in the holes.
②Fix the plastic anchors in the holes.
③Position the mounting bracket on the screw points.
® Fix the mounting bracket by tightening the screws.
® Slightly loosen bolt (A), (B) then adjust TILT (180°) and PAN (360°) of the camera
using a serration on the bracket and tighten the bolts firmly.
@ Slightly loosen bolt (C) then adjust ROTATE (360°) of the camera and tighten the
bolt firmly.
7. Dimension (mm)
(Standard)
69.7
123.6
99
8. Specification
5-2. 3-Axis Adjustment
(Standard) (Option: Cable-through type bracket)
TILT 90°
ROTATE 360°
PAN
360°
Pan bolt
65
TILT 180°
ROTATE 360°
PAN 360° Tilt
bolt
Rotation bolt
120°
* Specifications are subject to change without prior notice for improvement.
130612-1