Vision VN6XSFHD User manual

Quick guide
VN6XSFHD
Full HD CCTV Compact IR Bullet Camera
Power option 12VDC
Dear Customers!
By selecting this product, you have decided to use a professional device that guarantees
highest quality and reliability. We would like to thank you very much for your confidence and
kindly ask you to read the following instructions carefully before Installation and operation in
order to take full advantage of all quality features regarding this product.
INFORMATION
This equipment has been tested and found to comply with limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference
at one’s own expense.
WARNING
Changes or modifications not expressly approved by the manufacturer could void the user’s
authority to operate the equipment.
CAUTION – To prevent electric shock and risk of the fire hazards
-Do NOT use power source other than that specified.
-Do NOT expose this appliance to rain or moisture.
This installation should be made by a qualified service person and should conform to
all local codes.
Precautions
Please read the manual carefully before installation in order to set up and use the
camera correctly with best image quality.
- Installation and services should be carried out only by authorized personnel according to
local safety regulations.
Limitation of liability
This publication is provided “AS IS” without warranty of any kind, either express or implied,
including but not limited to, the implied warranties of merchantability, fitness for any
particular purpose, or non-infringement of the third party's right. This publication could
include technical inaccuracies or typographical errors. Changes are added to the
information herein, at any time, for the improvements of this publication and/or the
corresponding product(s).
Disclaimer of warranty
In no event shall seller be liable to any party or any person, except for replacement or
reasonable maintenance of the product, for the cases, including but not limited to below;
(1) Any damage and loss, including without limitation, direct or indirect, special,
consequential or exemplary, arising out of or relating to the product.
(2) Personal injury or any damage caused by inappropriate use or negligent
operation of the user.
(3) Unauthorized disassemble, repair or modification of the product by the user’
(4) Inconvenience or any loss arising when images are not displayed, due to any
reason or cause including any failure or problem of the product.
(5) Any problem, consequential inconvenience, or loss or damage, arising out of the
system combined by the devices of third party.
(6) Any claim or action for damages, brought by any person or organization being
photogenic subject, due to violation of privacy with the result of that surveillance-
camera's picture, including saved data, for some reason, becomes public or is
used for the purpose other than surveillance.
Package
Camera (x 1), Manual (x1), Ext-Video Cable (x1), Plastic Anchor (x1), L-Wrench
(x1) Power+VideoCable(x1)
Installation
How to mount
①Drill three screw holes on the ceiling plate to fix three anchors (supplied) in the
holes.
②Fix the plastic anchors in the holes.
③Position the mounting bracket on the screw points.
④Fix the mounting bracket by tightening the screws.
⑤Slightly loosen bolt (A) then adjust TILT (180°) and rotation (360°) of the
camera using a serration on the bracket and tighten the bolt firmly.
⑥Slightly loosen bolt (B) then adjust pan (360°) of the camera and tighten the
bolt firmly
3-Axis adjustment
The bracket is adjusted by 3-Axis. After installation, change the direction with (A), (B), (C) axes.
Lens external adjustment, EXT-Video
How to use
Connect Extra video output (BNC cable) to LCD monitor as a picture.
The lighting flash with an arrowhead symbol, within an equilateral triangle is intended to alert the
user to the presence of un-insulated dangerous voltage within the product’s enclosure that may be
of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence
of important operating and maintenance (servicing) instructions in the literature accompanying
the appliance.

5-5. How to adjust the Zoom/Focus.
- Push up or down the Tack SW (OSD Key) by finger for a second.
Up ÆZoom in
Down ÆZoom out
Left/Right ÆFocus in/out
Function and operation
Press the Tack SW (OSD Key) to open OSD menu.
MAIN MENU
LENS DC MANUAL
EXPOSURE
SHUTTER AGC SENS-UP
BRIGHTNES
S RETURN
ACCE DEFOG BACKLIGHT
WHITE BAL ATW AWC→SE
T INDOOR OUTDOOR MANUAL
DAY&NIGHT AUTO COLOR B/W EXT
NR 2DNR 3DNR LEVEL SMART NR RETURN
SPECIAL CAM TITLE D-
EFFECT MOTION PRIVACY
RETURN
LANGUAGE DEFECT RS485 VERSION
ADJUST
SHARPNESS
MOTION OSD LSC RETURN
NTSC/PAL
RESET FACTORY RETURN
EXIT
Communication
PELCO-D
Dimension(mm)
Specification
MODEL Full HD CCTV Compact IR Bullet Camera
Sensor Device Sony 1/2.9” progressive scan CMOS, 2MegaPixel
Total Pixels 2000(H) x 1241(V) 2.48 Megapixel
Effective Pixels 1984(H) x 1105(V) 2.19 Megapixel
Scanning System Progressive Scan
Horizontal More than 1000 TVL
S/N Ratio More than 52Db (AGC Off)
Min. Illumination 1.0 Lux with Sens-Up x 2 (F1.2, 30IRE, AGC On)
Shutter Speed 1/30s Default(Long Exposure Mode, ~1Sec)
Video Output 1920x 1080 30p
1280x 720 60p (Mode Select)
Video Output Format 1.485G/s, HD-SDI Output (SMPTE 292M)
AV Output 1V p-p Composite. 75 Ohms
Digital Output SDI Output
Lens 3 ~ 10mm VF Auto Iris Mega Pixel
Lens Control DC IRIS Lens
Power Source 220mA/12VDC(IR Off)
Operating Temp. -10°C ~ 50°C
Storage Temperature -20°C ~ 70°C
Operating Humidity Under 90% Non-condensing
Measurement (mm) Refer to the dimension
Weight ( Approx.) 1,000 g
OSD
2D/3DNR, Sens-UP, Shutter Speed, Language (English,
Japanese, Chinese), Privacy Mask, Motion Detection, White
Balance, BLC, DEFOG, etc.
IR Illumination
LED Spectrum 850nm
Viewable Distance Up to 20M at Moonless Night (w/IR illumination)
Min. Illumination 0 Lux (with IR illumination)
Power Consumption 220mA/12VDC(IR Off), 460mA/12VDC (IR On) – IR
illumination
* Specifications are subject to change without prior noitce for improvement.
485 Control Board Connection Port RS-485 Control Port
(+)CONNECTION TERMINAL(TRX+) 485+
(-)CONNECTION TERMINAL(TRX-) 485-
Item Camera ID BAUD RATE UART MODE RET PKT
Initial value 001 9600 8-NONE-1 ENABLE