Visionhitech VDA30PN User manual

Dear Customers!
The lighting flash with an arrowhead symbol, within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
INFORMATION
CAUTION – To prevent electric shock and risk of the fire hazards
This installation should be made by a qualified service person and should
conform to all local codes.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance(servicing)
instructions in the literature accompanying the appliance.
This equipment has been tested and found to comply with limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own expense.
WARNING
Changes or modifications not expressly approved by the manufacturer could void the
user’s authority to operate the equipment.
Do NOT use power source other than that specified.
Do NOT expose this appliance to rain or moisture.
By selecting this product, you have decided to use a professional device that
guarantees highest quality and reliability. We would like to thank you very much for
your confidence and kindly ask you to read the following instructions carefully before
installation and operation in order to take full advantage of all quality features
regarding this product.
CAUTION
CAUTION
RISK OF ELECTRIC
SHOCK
DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE THE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED PERSONNEL.
• Please read the manual carefully before the installation in order to make use the
camera to be set up correctly and to have the best picture quality.
• Please keep the manual in good condition for your future reference and service
application.
• Installation and services should only be carried out by an authorized personnel
according to local safety regulations.
• If any liquid or solid matter gets into the housing, immediately disconnect the
camera from power supply and have it checked by your authorized dealer before
reusing.
• Avoid installing the camera at extremely hot or cold places.
• Avoid installing the camera at a place of high humidity.
• Avoid installing the camera at the place exposed to gas or oil.
• If you are not a certified person, never try to dismantle the camera.
To avoid electric shock, never remove the screws or covers. There are no parts
inside that need maintenance by the user. All maintenance should be carried out
by qualified personnel.
• Keep the top glass of the lens always clean in order to obtain the best picture
quality all the time. Be careful not to be stained by fingerprint.
• Don't face the camera directly toward sunlight or sunlight reflecting area.
The image sensor may go defective at this condition.
• Please give a special attention to keep the unit from dangerous drop or external
shock during the process of transportation or handling.
• Never try to touch the camera in wet hand. It may cause an electric shock.
• Do not expose the camera to radioactivity. It causes a serious damage on the
image sensor.
1. Precautions
QUICK INSTALLATION GUIDE
700TVL Mini Armor Dome Camera
• 1/3" High Resolution Super Sensitive CCD
• 700TVL
• 2D DNR (Digital Noise Reduction)
• Dead pixel compensation
• 3.7mm lens
(90 degree AOV / Diagonal)
• 3-Axis (All directional mount)
• IP66 Weatherproof
• DC12V Power Input
• Smart IR and De-moire
◆Special features
- 10M IR Beam Distance
- Smart IR Image Compensation
- CDS Day & Night
※ Night Vision (Infra-Red) Version
QUICK INSTALLATIONGUIDE
650TVL Mini Armor Dome Camera
• 1/3" HIGH RESOLUTION SUPER SENSITIVE CCD
• 700TVL
• Wide Dynamic Range
• 2D DNR (Digital Noise Reduction)
• Dead pixel compensation
• 3.7mm lens
(90 degree AOV / Diagonal)
• 3-Axis (All directional mount)
• IP66 Weatherproof
• DC12V Power Input
• Smart IR and De moire
◆Special features
- 10M IR Beam Distance
- Smart IR Image Compensation
- CDS Day & Night
※ Night Vision (Infra-Red) Version
This publication is provided “AS IS” without warranty of any kind, either express or
implied, including but not limited to, the implied warranties of merchantability, fitness
for any particular purpose, or non-infringement of the third party's right.
This publication could include technical inaccuracies or typographical errors. Changes
are added to the information herein, at any time, for the improvements of
this publication and/or the corresponding product(s).
In no event shall seller be liable to any party or any person, except for
replacement or reasonable maintenance of the product, for the cases, including
but not limited to below:
(1) Any damage and loss, including without limitation, direct or indirect, special,
consequential or exemplary, arising out of or relating to the product;
(2) Personal injury or any damage caused by inappropriate use or negligent
operation of the user;
(3) Unauthorized disassemble, repair or modification of the product by the user;
(4) Inconvenience or any loss arising when images are not displayed, due to any
reason or cause including any failure or problem of the product;
(5) Any problem, consequential inconvenience, or loss or damage, arising out of
the system combined by the devices of third party.
(6) Any claim or action for damages, brought by any person or organization being
photogenic subject, due to violation of privacy with the result of that
surveillance-camera's picture, including saved data, for some reason,
becomes public or is used for the purpose other than surveillance.
2. Limitation of liability
3. Disclaimer of warranty
4. Package
5. Installation
Camera x 1
Tapping screws x 4
(Ø3*12L)
L-Wrench x 1
(2mm)
Drilling template x 1
Installation guide x 1
Ø
28
5-1. Installation overview
Ceiling Tile
Drilling Template
Dome base
Rear Sticker
Camera Set
Dome Front Set Screw
L-Wrench
Tapping Screw

140703-1S3
5. Installation 6. Troubleshooting
7. Dimension (mm)
8. Specification
• Non-IR Version • Night Vision (IR) Version
Problems Troubleshooting
The image on the
screen is dim.
The image on the
screen is dark.
The camera is not
working properly, and
the surface of the
camera is hot.
The screen flickers
continually.
IR Beam distance 10M-
Nothing appears on the
screen.
If there are problems in operating, please refer to the checklist below.
If the problem persists, please contact the agent where this product is purchased.
Please check that the power cord and line
connection between the camera and the monitor
are fixed properly.
Please check that you have properly connected
VIDEO cable to the camera VIDEO output jack.
Is the lens stained with dirt? Clean your lens with
soft, clean cloth.
Set the monitor to proper condition.
If the camera is exposed to too strong light, change
the camera position.
Adjust the contrast feature of the monitor.
Please check that you have properly connected the
camera to an appropriate power source.
Please check that direction of camera turns toward
the Sun.
If you have an intermediate device, set the 75Ω / Hi-Z
properly (Please check the impedance)
Operating current 95mA (IR Off), 150mA (IR On)85mA
Lens(Standard) 3.7mm lens3.6mm lens
MTBF 20,000 hours80,000 hours
Weight(Approx. g) 140130
Image sensor 1/3" High Resolution Super Sensitive CCD
Effective Pixels NTSC : 976(H) x 494(V), PAL : 976(H) x 582(V)
H. Resolution 700TV Lines
Synchronizing system Internal
Scanning system NTSC : 525 Lines PAL : 625 Lines 2:1 Interlaced
Video output 1.0Vp-p Composite 75 Ohms
S/N ratio More than 52dB (AGC Off)
Shutter Speed NTSC : 1/60 ~ 1/100,000 sec. PAL : 1/50 ~ 1/100,000 sec.
Gamma Correction Standard γ = 0.45
White Balance 2,300°K ~ 10,500°K Auto
Gain Control Standard : -6dB ~ 44.8dB Auto
Smear Effect 0.005%
Power source 12VDC
Operating temp.
/Humidity -10°C ~ 50°C (Humidity:0% RH ~ 90% RH)
Storage Temperature -20°C ~ 60°C
IP Rating
Ø50.5 x 44.3mm (H)
Measurement(mm)
IP 66
Specifications are subject to change without prior notice for better improvement.
*
5-3. Video Monitor
5-2. Adjustment of tilting position
The tilting position can be adjusted
between 0
° to 90 ° .
5-4. Power
- The dome base has two
directions only for 90
° tilt.
- Fix the dome base after
the direction of the view
is determined.
•
•
•
- Night Vision (IR) Version (90°)
- Non-IR Version (90°)
Interim equipments
(DVR, Multiplexer,
Transmitter etc.)
BNC-FE (Video)
DC-Ma (Power)
· Important:
· Night Vision (IR) Version (Ø50.5 x 44.3mm)
·Non-IR Version (Ø50.5 x 44.3mm)
Ø33
Ø50.5
44.3
Ø25
Ø50.5
44.3