Eneo MPD-64A0003P0A User manual

User Manual
EN
1/2.9” HD Dome, Fixed,
2560x1440, Day&Night, AF
Zoom, WDR, 3.2-9mm, Infrared,
Indoor
MPD-64A0003P0A

2
Table of content
Parts supplied ....................................................................................................... 5
Part names ............................................................................................................ 6
Operating instructions ........................................................................................ 10
Installation instructions ....................................................................................... 7
1. ZOOM / FOCUS ................................................................................................................................... 13
2. EXPOSURE .............................................................................................................................................. 16
3. SCENE ENHANCE ................................................................................................................................. 17
4. 3D-NR ..................................................................................................................................................... 19
5. DAY / NIGHT ........................................................................................................................................ 19
6. PICT. ADJUST ....................................................................................................................................... 21
7. SPECIAL ................................................................................................................................................. 22
8. SYSTEM ................................................................................................................................................. 24
9. EXIT ......................................................................................................................................................... 25
Open the dome cover ............................................................................................................................... 8
Detach the dome camera from the easy adaptor .......................................................................... 8
Power Supply connections ...................................................................................................................... 9
Pan & Tilt adjustment ............................................................................................................................... 9
Using OSD Control controller ............................................................................................................... 10
OSD menu table ......................................................................................................................................... 11
OSD Menu Setup .................................................................................................. 13
Further information ............................................................................................. 25

3
EN
Safety instructions
General safety instructions
•
• Keep the operating instructions in a safe place for later use.
• Installation, commissioning and maintenance of the system may only be carried out by authorised
individuals and in accordance with the installation instructions - ensuring that all applicable standards and
guidelines are followed.
• Protect the devices from water penetration and humidity, since these can cause lasting damage.
• Should moisture nevertheless enter the system, under no circumstance switch on the devices under these
conditions, instead send them for examination to an authorised specialist workshop.
•
• The device must be protected from excesses of heat, dust, humidity and vibration.
• When separating the system from the voltage supply, only ever use the plug to pull out the cable. Never
pull directly on the cable itself.
• Lay the connecting cables carefully and check that they are not mechanically stressed, kinked or damaged
and that no humidity can penetrate into them.
• In the event of a malfunction, please inform your supplier.
• Maintenance and repairs may only be carried out by authorised specialist personnel.
• The system must be isolated from the power supply before opening the housing.
•
• Connection cables should always be exchanged through Videor E. Hartig GmbH.
• Use only original spare parts and accessories from Videor E. Hartig GmbH.
• The housing should only be cleaned using a mild domestic cleaning agent. Never use solvents or petrol as
these can permanently damage the surface.
• During installation, it is essential to ensure that the seals provided are correctly installed and that they are
not displaced during installation. Damaged seals must not be installed and will invalidate any warranty.
• The installer is responsible for the maintenance of the enclosure as per the technical data, e.g. by sealing
the cable outlets with silicone.
•
• The devices may only be operated in the temperature range indicated in the data sheet and within the
dened air humidity range.
• The camera may never be pointed directly at the Sun with the aperture open (this will destroy the sensor).
• It is unavoidable that during manufacture and to a certain extent during later use, humidity will be present
may condense inside the housing.
• To avoid this condensation inside the very tightly sealed housing, the manufacturer has inserted silica gel
sachets in the housing of the various camera types.
• It is however a physical given, that these silica gel bags will reach saturation after a certain amount of time.
They should therefore be replaced with new silica gel sachets.
• During installation, it is essential to ensure that the seals provided are correctly installed and that they are
not displaced during installation. Damaged seals must not be installed and will invalidate any warranty.
• A multipolar, easily accessible isolation device should be installed in the proximity of the IR Spotlight, in
order to disconnect the device from the power supply for service work.
• The earth connection must be made according to the low impedance requirement of DIN VDE 0100.
• Subsequent painting of the equipment surface can impair the function.
• Any warranty claim is invalidated by subsequent painting.
• A safety margin of > 1m from the spotlight must be maintained when viewing directly into the IR Spotlight
in a darkened environment.
• Do not look directly at invisible LED radiation using optical instruments (e.g. a reading glass, magnifying
glass or microscope), since this can endanger the eyes, LED Class 1M.
• Operation of the IR spotlight with a defective cover or during repair is prohibited.
Before switching on and operating the system, rst read this safety advice and the operating instructions.
The system must never be used outside of the technical specications, since this can destroy it.
The device may only be opened by qualied service personnel. Unauthorised access invalidates any
warranty claim.
Wire end ferrules should be used when shortening the exible connection cables.
Product - Specic Safety Instructions

4
Class A device note
This is a Class A device. This device can cause malfunctions in the living area; in such an event, the operator may
need to take appropriate measures to compensate for these.
WEEE (Waste Electronical & Electronic Equipment)
Correct Disposal of This Product (Applicable in the European Union and other European countries with separate
collection systems).
This marking shown on the product or its literature, indicates that it should not be disposed with
other household wastes at the end of its working life. To prevent possible harm to the environment
or human health from uncontrolled waste disposal, please separate this from other types of wastes
and recycle it responsibly to promote the sustainable reuse of material resources. Household users
should contact either the retailer where they purchased this product, or their local government
Business users should contact their supplier and check the terms and conditions of the purchase
contract. This product should not be mixed with other commercial wastes for disposal.
Graphical symbols
Please pay attention to the safety instructions, and carefully read through this instruction guide before initial
operation.
Important points of warning are marked with a caution symbol.
iImportant points of advice are marked with a notice symbol.

5
EN
Parts supplied
• Indoor Dome camera
• Operating instruction
• Mounting Template
• Easy Adaptor (Flat type)
• Easy Adaptor (Tilted type)
• Plastic Anchor: 6 x 30mm (3x)
• Mounting Screw: 3.5 x 25mm (3x)
• Open Driver (1pc)
• Video Sub-out Cable (1pc)

6
Part names
Dome Cover
Lens
Bubble Shield
Bubble Dome
Dome Base
Easy Adaptor
(Flat type)
SMD LEDs
Light Sensor
Power Cable
3-Axis Gimbal
Tilted Easy Adaptor
OSD Menu Control board

7
EN
Installation instructions
CAUTION: The camera’s base should be attached to a structural
object, such as concrete, hard wood, wall stud or ceiling rafter
that supports the weight of the camera. If necessary use appro-
priate mounting material (e.g. anchors) instead of the material
enclosed with the camera.
1. Drill three holes for mounting on the ceiling or wall.
2. Place the Easy Adaptors at the pre-drilled installation position and x it by
using mounting screws.
3. Route the power/video cable to the connecting place.
4. Attach the dome base assembly to the Easy Adaptor.
5. Adjust the camera’s viewing angle (Pan, Tilt, Rotation)
6. Tighten the set screw to x a pan plate after the setting. Then remove the
caution sticker from the lens.
7. Assemble the dome cover to the dome base unit.
Mounting Screw (3.5x25mm)
Plastic Anchor (6x30mm)
OPEN
LOCK

8
CAUTION:
Tighten enough the dome cover xing screws so that there should
be NO gap between Lens hood and clear bubble to avoid the light
inow from IR LEDs.
Care should be taken the cable is NOT to be damaged, kinked or
exposed in the hazardous area.
Extreme care should be taken NOT to scratch the window in front
of lens.
Detach the dome camera from the easy adaptor
Push the hook on the dome base and swing the dome base to counter-clock
wise. Then detach the dome camera from the installed easy adaptor.
1
2
3
12
Open the dome cover
2. Hold the Dome housing with one hand and turn the open tool until Dome
Cover is suciently open.
1. Insert wide side of Open Tool into the lock of Dome Cover.
3. Once Dome Base and Dome Cover are detached, press the edge of Dome
Cover and pull it down with hands.
Extreme care should be taken NOT to apply force to IR LEDs.

9
EN
i
Pan & Tilt adjustments
Power supply connections
Please use the cable as provided with camera. If camera cable is cut and
re-wired, the transmission distance of video can be reduced.
Especially SDI cable should not be cut because it requires detailed wiring
job and aects the transmission distance.
1. Pan limit: Pan is limited to +/- 165°. Do NOT force to rotate the gimbal over the
limit to prevent from the internal damage.
2. Tilt limit: Tilt is limited to 25° min ~ 90° max. with reference to the ceiling when
the inclination of camera module is 0°, that is, the image is aligned horizontally.
3. Inclination limit (Horizontal image alignment): Inclination limited to +/-60° max.
25º
90º
10º
Tilted Easy Adaptor
Extended Viewing angle
15º
※SDI OUTPUT
(Yellow)
ANALOG OUTPUT
(Black)
POWER ( )
Camera can be operated with the regulated or unregulated DC12V but
the regulated power supply of DC12V is recommended.
Camera is protected from the damage by the reverse connection of polarity.

Operating Instruction
10
Using OSD controller
Setup menu can be accessed and controlled by OSD control joystick on the rear
of the camera unit. Five commands are available with the joystick.
OSD Control
Joy Stick
Video Format
DIP Switch
EX-SDI↔HD-SDI
i
i
HD-SDI or EX-SDI is selectable by Video format switch only.
TVI mode or AHD mode is selectable in the menu only.
(SYSTEM> ANALOG MODE)
1. SET (●) : Access to the menu or enter the setting. To enter the main menu,
press the Set Key down.
2. UP/DOWN (▲/▼) : Choose the desired sub-menu and to move the cursor up
or down.
3. LEFT/RIGHT (◄/►) : Set up the value of the selected menu. Used to adjust the
desired menu selection and to move the cursor left or right.
Description of the OSD control operation
4. ‘ ’ denotes the long press down straightly for about 2 seconds
Description of the Motorized ZOOM&FOCUS adjustment
1. ▲: Zoom In
2. ▼: Zoom Out
3. ◄: Focus Near
4. ►: Focus Far
Works only when OSD Menu is inactive.
Video Sub-out Connector

11
EN
OSD menu table
MENU SUB Menu Conguration
ZOOM/FOCUS
ZOOM
EXPOSURE
MODE
MODE MODE
ROI MODE
LOW, MIDDLE, HIGHWEIGHT
WDR
SCENE ENHANCE
ZOOM SPEED
POI ZOOM
PRESET ZOOM
HOME POSITION
RATIO DISP
FOCUS MODE
LENS INIT.
SMART MOTION ZOOM
DOL, FRAME
WINDOW ZONE/USE, H/V-POS, H/V-SIZE
NORMAL
FOCUS
BRIGHTNESS DAY
BRIGHTNESS NIGHT
AGC
SENS-UP
AUTO, IRIS PRIOR, SHUT PRIOR, MANUAL, FLICKERLESS
0~20
0~20
0~10
SLOW, MID, FAST
H/V-POINTER
O-ZOOM RATIO, DURATION
OFF, ON
ZOOM PUSH, AUTO, MANUAL
ZONE NUM, ZONE VIEW, H/V POS, ZOOM RATIO
OFF, x2, x4, x8, x16, x32
ON
RANGE
FILTER
AUTO-C
OFF, ON 10% ~ 30%
LOW, MIDDLE, HIGH
OFF, HALF, FULL
DIS
3D-NR OFF, LOW, MIDDLE, HIGH
0~10
HLC LEVEL, COLOR
H/V-POS, H/V-SIZE
BLC
PICT. ADJUST
DAY / NIGHT
WHITE BAL.
SHARPNESS
GAMMA
COLOR GAIN DAY
COLOR GAIN NIGHT
EXTERN
AUTO
COLOR
COLOR DN
B&W
SMART IR, ANTI-SAT., DELAY, IR LED CTL
SMART IR, ANTI-SAT., AGC THRES, AGC MARGIN, DELAY
SMART IR, ANTI-SAT.
AUTO, AUTOext, PRESET, MANUAL (C-TEMP, R/B-GAIN)
0~20
0~20
0.45, 0.55, 0.65, 0.75
MIRROR / FLIP OFF, HV, Hor., Ver.
SPECIAL
PRIVACY ZONE NUM, ZONE DISP, H/V-POS, H/V-SIZE, MASK COLOR,
TRANSPARENCY
BOX
POLYGON
D-WDR OFF, LOW, MIDDLE, HIGH
DEFOG
SHADING OFF, ON
MODE, LEVEL
OFF, ON
ZONE NUM, WINDOW USE, MOTION WIN SET, H/V POINTER,
ZOOM RATIO, DURATION, SENSITIVITY
ZONE NUM, ZONE DISP, POS 0-X/Y, POS 1-X/Y, POS 2-X/Y,
POS 3-X/Y, MASK COLOR, TRANSPARENCY

12
SYSTEM
LANGUAGE ENG, CHN(S), CHN, JPN, KOR, GER
RESET ON
EXIT SAVE, CANCEL
RESOLUTION
TV SYSTEM
COMM.
ANALOG MODE TVI MODE
AHD MODE
EU(PAL), US(NTSC)
CAM ID, BAUDRATE
SPECIAL OFF, RIGHT UP, LEFT DOWN
CAM TITLE
SDI MODE HD-SDI, EX-SDI 1.0, EX-SDI 2.0, OFF
1440 30P/25P, 1080 30P/25P, 720 30P/25P
iSupported resolution according to Video format.
EX-SDI
1440P (30/25P)
O O O
O O
O
O
O
O O
1080P (30/25P) 720P (30/25P)
HD-SDI
AHD mode
TVI mode
UTC TYPE (PELCO-C, HIK-C), HD ANALOG GAIN
HD ANALOG GAIN

OSD Menu Startup
13
EN
Press the ‘OSD menu SET key’ down to access the setup menu mode.
• RETURN : Returns to the previous menu.
• EXIT : Exits the current menu with SAVE or CANCEL.
MENU V1. XX
1. ZOOM/FOCUS
2. EXPOSURE
3. SCENE ENHANCE
4. 3D-NR
5. DAY/NIGHT
6. PICT. ADJUST
7. SPECIAL
8. SYSTEM
9. EXIT
WDR
MIDDLE
SAVE
EXTERN
1-1. ZOOM
1-1-1. ZOOM SPEED : Set the zoom speed SLOW, MID, FAST
1-1-2. POI ZOOM (Point Of Interest) : ON enables to set the interest area which can
zoom in/out the center area of video image.
1. ZOOM/FOCUS
• H-POINTER : Sets the horizontal location of area to be zoomed by POI ZOOM.
• V-POINTER : Sets the vertical location of area to be zoomed by POI ZOOM.
1. ZOOM/FOCUS
ZOOM
FOCUS
RETURN
ZOOM
ZOOM SPEED
POI ZOOM
PRESET ZOOM
SMART MOTION ZOOM
HOME POSITION
RATIO DISP
RETURN
FAST
ON
ON
OFF
OFF
OFF
• ZONE NUM : Set a number to select a preset zoom from 1 to 4
• ZONE VIEW : ON enables a relevant preset zone.
• H / V -POINTER : Adjust position of preset zone.
• ZOOM RATIO : Set the Optical/Digital Zoom Ratio.
Zoom ratio is automatically culculated according to the location of pointer.
1-1-3. PRESET ZOOM : Able to zoom in for the preset area

14
POI ZOOM
H-POINTER
V-POINTER
RETURN
29
15
PRESET ZOOM
ZONE NUM
ZONE VIEW
H-POINTER
V-POINTER
ZOOM RATIO
RETURN
1
ON
15
8
OZ X1.1
llllllllllllllllllllll
10
SMART MOTION ZOOM
ZONE NUM
WINDOW USE
MOTION WIN SET
H-POINTER
V-POINTER
ZOOM RATIO
DURATION
SENSITIVITY
RETURN
1
ON
OFF
15
8
OZ X1.0
5 SEC
• ZONE NUM : Set a number to select a smart motion zoom from 0 to 3.
• WINDOW USE : Sets ON/OFF motion detection and zoom in/out area which
you selected zone number.
• MOTION WIN SET : Sets ON or OFF to display the relevant motion zone.
• H / V -POINTER : Adjusts the detection area H,V position which you selected zone.
• ZOOM RATIO : Set the Optical/Digital Zoom Ratio.
• DURATION : Sets the duration time for zooming by Motion.
• SENSITIVITY : Adjusts the detection sensitivity for motion.
High value increases the sensitivity to detect the small motion easily.
• O-ZOOM RATIO : Sets the Optical ZOOM positon as Home Position. X1.0~X3.0
• DURATION : When ZOOM IN/OUT control is accomplished, camera returns to
pre-dened Zoom position after Duration time.
1-1-5. HOME POSITION : Camera can be congured to return to pre-dened Zoom
position automatically after certain period since ZOOM IN/OUT control is
accomplished. Home Position is recovered even after camera is re-initializing
or Power ON/OFF.
1-1-4. SMART MOTION ZOOM : ON enables to Automatic Zoom IN/OUT when motion
is detected and also enables MOTION WIN SET to ON.
Smart Zoom is not supported when FOCUS mode Manual /AUTO is used.

EN
15
1-2. FOCUS
1-2-1. FOCUS MODE :
Selects FOCUS MODE to ZOOM PUSH, AUTO or MANUAL. If you set to AUTO
or MANUAL mode, Smart Motion Zoom function in ZOOM is disabled.
1-1-6. RATIO DISP : ON enables to display the zoom ratio on the bottom right corner.
OZx.x appears during the optical zoom and DZx.x will display by multiplying
the optical zoom ratio and the actual digital zoom ratio.
• ZOOM PUSH : Focusing is activated only when zoom in/out is working.
Focusing works steadily for sharp focusing on the object.
• AUTO : Focusing is always working.
• MANUAL: Focusing can only be adjusted by ▲,▼of OSD control joystick or
the remote control via UTC.
Lens initialization is necessary during the installation or the regular operation
to align the position data with the mechanical positions whose lens elements
may move and deviate from its calibrated position by the shock or vibration,
for example, during the transportation. Lens initialization is automatically
executed at power up.
INITIAL starts the lens initialization when pressing the joystick straight down
for about 2 sec. It is strongly necessary to execute LENS INIT in cases below;
- At the nal step for the installation.
- When focus becomes out of control by the shock or vibration.
1-2-2. LENS INIT :
FOCUS
FOCUS MODE
LENS INIT
RETURN
ZOOM PUSH
ON
FOCUS
FOCUS MODE
LENS INIT
RETURN
MANUAL
ON
Smart Zoom is not supported
when FOCUS mode Manual/AUTO is used
iSmart Zoom is not supported when FOCUS mode Manual/Auto is used.

16
2-1. MODE
2-1-1. AUTO : Optimizes the video level by controlling the iris and the shutter speed
automatically.
2-1-2. IRIS PRIOR : Selects to x IRIS in a certain apperture and the video level is con-
trolled by an automatic shutter control. Lower IRIS LEVEL will close more iris
and increase the eld of depth in the daytime but signicantly decrease the
low light performance. Too much low IRIS LEVEL will result in the foggy video
by the diusion from the lens iris.
2-1-3. SHUT PRIOR : Selects to x SHUTTER speed in a certain speed and the video
level is controlled by an automatic iris control. This mode is useful when the
color rolling occurs under the uorescent lighting. It is not recommendable at
outdoor in the daytime.
2. EXPOSURE
llllllllllllllllllllll
10
llllllllllllllllllllll
10
llllllllllllllllllllll
8
2. EXPOSURE
MODE
BRIGHTNESS DAY
BRIGHTNESS NIGHT
SENS-UP
AGC
RETURN
AUTO
X2
2-1-5. FLIKERLESS : Reduces the icker in video when US(60Hz)/EU(50Hz) mode is
used in 50Hz/60Hz uorescent lighting respectively.
• IRIS LEVEL : 0~17
• SHUT SPEED : 1/30(1/25), 1/60(1/50), 1/120(100), 1/250(200), 1/500(400),
1/1000(800), 1/2000(1600), 1/4000(3200), 1/8000(6400), 1/15000(12800),
1/30000(25600)
2-1-4. MANUAL : Iris level and Shutter speed can be set to x.
2-2. BRIGHTNESS DAY
2-3. BRIGHTNESS NIGHT
Adjusts the brightness of video in DAY mode (0~20).
Adjusts the brightness of video. It works in COLOR D/N, NIGHT mode (0~20).
Selects EXPOSURE MODE to AUTO, IRIS PRIOR, SHUT. PRIOR, MANUAL and Flickerless.
If you set to WDR in SCENE ENHANCE menu, SHUT. PRIOR, MANUAL and FLICKERLESS
modes are disabled.

17
EN
The brighter video can be obtained by increasing the exposure time in the night
with SENS-UP. It can be set to O, x2, x4, x8, x16 or x32.
Higher setting can get the brighter video but the slower frame rates with more
white pixels.
AGC(0~10) amplies the video gain for brighter video but noise and white pixel
accordingly.
2-4. SENS-UP
2-5. AGC
3. SCENE ENHANCE
MENU V1. XX
1. ZOOM/FOCUS
2. EXPOSURE
3. SCENE ENHANCE
4. 3D-NR
5. DAY/NIGHT
6. PICT. ADJUST
7. SPECIAL
8. SYSTEM
9. EXIT
WDR
MIDDLE
SAVE
EXTERN
OFF
HIGH
3. SCENE ENHANCE
WDR MODE
ROI MODE
WEIGHT
RETURN
DOL
3-1. WDR (Wide Dynamic Range)
WDR is extended the gain range of the video that is mostly useful if camera takes a
simultaneous picture of both indoor and outdoor nearby window.
It improves contrast of the picture in outdoor scenery as well as indoor.
Video outputs image processed from two images by dual shutter (long and short
shutter) in a eld to provide the best dynamic range. Highlight area is compensated
by the short shutter and dark area is compensated by the long shutter. Final video
may have less contrast compared to the conventional camera which does not have
WDR function.
ROI MODE
WINDOW ZONE
WINDOW USE
H-POS
V-POS
H-SIZE
V-SIZE
RETURN
0
ON
720
330
512
432

18
3-1-1. WDR MODE
• DOL (Digital OverLap): It is compensated video image by 3 layer data of low,
middle and high shutter.
• FRAME : It is conventional WDR mode.
3-1-2. ROI MODE (Region Of Interest) : Sets specic area of WDR by window setting.
Select window zone number from 0 to 3 and window use set to on. Then the
window zone can be modied position and size.
• WINDOW ZONE : Set the detection zone number from 0 to 3.
• WINDOW USE : Sets ON/OFF motion detection area which you selected.
If set to ON, It can be adjusted position and size.
• H/V-POS : Adjusts the ROI area H, V position which you selected zone.
• H/V-SIZE : Adjusts the area size using H, V direction which you selected zone.
3-1-3. WEIGHT : LOW, MIDDLE, HIGH
Selects the WDR value that you set the WDR mode.
Cuts out the highlight area with mask and excludes it from compensation.
3-2. NORMAL
3-3. HLC (High Light Compensation)
Optimized for the normal indoor and outdoor in the good lighting condition.
3-3-1. LEVEL (0~20): Sets the HLC level.
It determines the video level that
starts cutting out. Lower setting
starts the cut out at lower level.
The cut out area is masked with
selected color.
3-3-2. COLOR :
Select mask color from 8 colors.
Black, White, Yellow, Cyan, Green,
Magenta, Red, or Blue.
llllllllllllllllllllll
10
3. SCENE ENHANCE
LEVEL
COLOR
RETURN
BLK
This function is used to brighten an image in the foreground with a highly light area
behind it such as sunlight, limiting the aect of silhouette.
BLC has a target window for compensation and its size and position can be set by
H-POS, V-POS, H-SIZE and V-SIZE.
3-4. BLC (Backlight Compensation)
3-4-1. H/V-POS : Sets the position of BLC area to move vertically and horizontally.
3-4-2. H/V-SIZE : Sets the size of BLC area to move vertically and horizontally.

19
EN
4. 3D-NR (Digital Noise Reduction)
DNR function improves picture quality by ltering out signal noise which is generated
under the low light conditions. Sets o, low, middle or high level.
3DNR(3-dimensional noise reduction) which reduces the noise by the multi frames.
It is eective at low light. Setting high is strength of noise reduction but the result
may occur in loss of sharpness and the tail eect of a comet.
MENU V1. XX
1. ZOOM/FOCUS
2. EXPOSURE
3. SCENE ENHANCE
4. 3D-NR
5. DAY/NIGHT
6. PICT. ADJUST
7. SPECIAL
8. SYSTEM
9. EXIT
WDR
MIDDLE
SAVE
EXTERN
5. DAY & NIGHT
DAY/NIGHT is used to control the setting during day-time and night-time operation.
Select the mode according to the light condition and the camera types.
DAY or NIGHT is determined by the built-in light photo sensor.
Camera with IR LED must be set to EXTERNAL.
5-1. EXTERN
5-1-1. SMART IR
SMART IR can be set to reduce the saturation by the strong IR illumination in
the night in any menu of EXTERN, AUTO and B/W(NIGHT). Set to ON, SMART
IR is enabled and ANTI-SAT. level is controlled.
5. DAY&NIGHT
SMART IR
ANTI-SAT.
DELAY
IR LED CTRL
RETURN
ON
AUTO
MIDDLE
llllllllllllllllllllll
10
5-1-2. ANTI-SAT. (Available only with the SMART IR is ON)
Sets the anti saturation level 0~20. Setting high level avoids the saturation
strongly but the corners will be darker accordingly.

20
5-1-1. SMART IR
SMART IR can be set to reduce the saturation by the strong IR illumination in
the night in any menu of EXTERN, AUTO and B/W(NIGHT). Set to ON, SMART
IR is enabled and ANTI-SAT. level is controlled.
5-1-3. DELAY
D→N DELAY is time in second while camera maintains its status before Day
to Night switches. DELAY can avoid the unwanted/frivolous switching by a
short term lights such as light from the passing car. Sets delay term low,
middle or high.
5-1-4. IR LED CTL
IR LED Control (AUTO/OFF) is available with IR LED model only. If it is set to
OFF, IR LED will be turned OFF but DAY or NIGHT is still determined by the
built-in light photo sensor.
5-1-2. ANTI-SAT. (Available only with the SMART IR is ON)
Sets the anti saturation level 0~20. Setting high level avoids the saturation
strongly but the corners will be darker accordingly.
5-2. AUTO
Used when DAY or NIGHT is determined by light level through the lens and DAY
from/to NIGHT is switched automatically by the scene brightness.
It can be controlled the AGC threshold level, AGC margin and delay time.
5. DAY&NIGHT
SMART IR
ANTI-SAT.
AGC THRES
AGC MARGIN
DELAY
RETURN
OFF
MIDDLE
NOT USED
llllllllllllllllllllll
10
llllllllllllllllllllll
15
5-2-3. AGC THRES
AGC(Auto Gain Control) is a threshold level which determines to switch DAY
from/to NIGHT in AUTO mode. Higher value makes the camera switch DAY
from/to NIGHT at bright illumination.
5-2-4. AGC MARGIN
Sets the gap level switching from/to DAY(color) or NIGHT(B/W).
5-2-5. DELAY
D→N DELAY is time in second while camera maintains its status before Day
to Night switches. DELAY can avoid the unwanted/frivolous switching by a
short term lights such as light from the passing car.
Sets delay term low, middle or high.