Visionhitech VD70CSHR-36IR User manual






















































































































































































































































































































































 



!
!
!


VD70CSHR – 36IR 500TVL
VD70CSHRX – 36IR 500TVL








































Please read this manual carefully before installation and
operation of the product.









Rev1. Jul.21.2006
 "!#$  !%
By selecting this product, you have decided to use a professional device that guarantees
highest quality and reliability. We would like to thank you very much for your confidence and
kindly ask you to read the following instructions carefully before Installation and operation in
order to take full advantage of all quality features regarding this product.
The lighting flash with an arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended toalert
the user to the presence of important operating and maintemance
(servicing) instructions in the literature accompanying the appliance.


RISK OF ELECTRIC
SHOCK
DO NOT OPEN
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE THE COVER (OR BACK),
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
PERSONNEL.

INFORMATION- This equipment has been tested and found to complay with limits for
a Class A digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
WARNING – Changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate the
equipment.
CAUTION – To prevent electric shock and risk of the fire hazards:
Do NOT use power source other than that specified.
Do NOT expose this appliance to rain or moisture.

&#'(#!
1. Special Features of the model
2. Warnings and Precautions
3. Package
4. Dimension
5. Assembly overview
6. Installation
6-1. Overview of the 3 directional adjustments
6-2. Video monitor
6-3. Power
7. Trouble shooting guide
8. Specification
This installation should be conducted by a qualified service person and should
conform to all local codes.

)*+('" !#'$ #
Extremely high resolution 500TV Lines
This camera offers an extremely high resolution of 500TVL at daytime in Color image and 540TVL at
nighttime in B/W image.
True Day & Night
The image is automatically converted from Color to B/W at 4-5Lux darkness.
This function maintains the picture quality at daytime true Color and noiseless clear B/W image at
nighttime,enhancing the sensitivity and resolution up to 540TVL.
Excellent sensitivity
By using a Sony Super HAD, the camera offers an excellent sensitivity of 0.2lux/F1.2 (0.1Lux BW) w/o IR
on and “0” lux with IR on.
,*-  !. + ("#!
Please read the manual carefully before the installation in order to set up the
camera correctly and to achieve the best picture quality.
Follow these safety instructions. This will help prevent possible damages from improper use.
Please keep the manual in good condition for your future reference and service application.
Installation and services should only be carried out by an authorized personnel according to
local safety regulations.
Repairs and adjustments of the camera should be conducted by an authorized personnel.
If any liquid or solid matter gets into the housing, immediately disconnect the camera from
powersupply and have it checked by your authorized dealer before reusing it.
Avoid installing the camera in extremely hot or cold places.
If you are not a certified person, never try to dismantle the camera. To avoid electric shock,
never remove the screws or covers. There are no parts inside that need maintenance by the
user. Qualified personnel should carry out all maintenance.
Please give a special attention to keep the unit from dangerous drop or
external shock during the process of transportation or handling.
Never try to touch the camera in wet hand. It may cause an electric shock.
#

Make sure to use a regulated 12VDC power source.
Check the power with the power tester to make sure if the power supply gives an exact 12VDC
regulation. Even sometimes, UL marked power supply unit generates unregulated power causing
the camera to burn in many cases.

/*0(1
1. High resolution Color CCD Camera
2. User's manual
3. Mounting material
4. Connection cable
2*$ !#3$ $ 4


5*!!$ &# 6 
7*!#
Installation and services should only be carried out by an authorized personnel according to
local safety regulations.
Should liquid or solid matter gets into the housing, disconnect the camera immediately from
the power source and have it checked by your authorized dealer before reusing it.
Keep an adequate distance from direct heat sources.
1. Drilling template sheet (Self adhesive)
Attach the template sheet on the wall or ceiling.
Drill the mounting holes as instructed on the
template.
2. Dome base
Separate installation of the dome base prior to the
installation of the camera set is possible. Install it
on the wall, celing or slope with the supplied Pan
head tapping screws (x 4ea).
3. Mounting screws
4. Camera set
Camera set is manufactured as IP66 grade
weatherproof. Users are not allowed to open the
camera set by themselves. It may cause a malfunction
of waterproof.
5. Wrench screws (x 2ea) & lever
(Supplied)
6. Dome Front

Avoid installing the camera at a place of high humidity.
Avoid installing the camera at a place exposed to gas or oil.
Keep the top glass of the lens always clear in order to obtain the best picture quality all the
time. Be careful not to stain the lens and the outer glass by fingerprints.
Do not point the camera toward artificial lightings, the sun, the sky or to the direction of a
window. The best picture quality will be achieved if both camera and lighting point to the area
you want to record.
Do not expose the camera to radioactivity. It causes a serious damage on the CCD.
Do not put objects inside the unit. Make sure that no metal objects or flammable substances
get into the camera. It could cause fire, short-circuits or damages.
Install away from electric or magnetic fields.
6.1 Overview of 3 directional adjustments
This unit provides an efficient way of mechanical adjustment of the camera angle that can
freely position to all angles from ceiling, wall or slope mounting. Especially, noticeable
points are Vertical angle that can be tilt down to 90 degree and the Rotation adjustment
that can correct the image to be upright condition when the dome camera is installed on the
wall or on the slope.


Caution
Please make sure that the surface of the lens and the dome cover stay always clear. When these
parts are contaminated, clean them very carefully with soft cloth. Even a small scratch on these
parts results in the picture blooming or reflection.
Perfect 3
-
AXIS adjustments
Vertical angle can be tilt down to its maximum 90 degree. (TILT = 90°)
Horizontal angle is adjustable to its maximum 350 degree. (Horizontal = 350°)
Rotation angle is adjustable to its maximum 180 degree. (Rotation = 180°)
Please lock the dome with the lever with strong enough after adjustments so that the lens angle stay its
direction firmly against vibration or external shock.

6.2 Video Monitor
Connect Video cable with BNC-male connector to the monitor.


Impedance alliance in the system connection.
Make sure to connect the cable with the power off. Please locate the impedance switch
of each equipment as instructed. Locate the switch to Hi-z position for the interim equipment.
Locate the switch to 75for the last equipment.
6.3 Power
Waterproof Cable Option
* #"&!##
Before sending the camera out for repair, check the items below. If the camera persists after
checking these items, contact your service center.
), 

Please make sure to use a UL/CE approved
and 12VDC regulated power supply.



Problems Trouble shooting
Nothing appears on the
screen.
Please check the power connection.
Please check the video signal line connection.
The video image is not
clear.
Please check if the lens or the outer glass is clean.
- Dirt or fingerprints on the lens can affect the image
blooming or reflection. Gently wipe any dirt or
fingerprints off the lens or the glass with a soft cloth.
Please check and adjust contrast feature of the monitor
Please check if the camera is exposed directly toward a
bright light, sunlight, or sun light reflecting area.
Please move the camera’s position in this case.
The screen is dark. Please check and adjust contrast feature of the monitor
If there is any interim equipment, set the 75position
properly and check the terminals.
Please check if the power supply is within the
specification.
- When the cable connection requires a long distance,
there may need a higher power supply or an additional
power/video amplification.
The camera’s surface is too
hot and black stripes
appear on the screen.
Please check if the power supply is regulated and is
within the standard requirement of the product.
The screen is flickering. Please check if the camera is facing directly toward
sunlight or fluorescent light.
IR beam is weak Check if the distance of the cable installation is too long
or if the cable is not UL standard. Using a lower grade
cable or long distance cable installation can cause a
serious voltage drop. Please check the voltage output
level of the cable and change the power source in this
case. Make a special care not to supply too much
power over the camera as well.

8*+('(#
Specifications are subject to change without prior notice.
ITEM
VD70CS-W36IR
VD70CSHR-W36IR
Input voltage 12VDC
Power
Operating current 140mA
Sensor 1/3” Sony Super HAD CCD
CCD
Effective Pixels NTSC : 512(H) X 492(V)
PAL : 500(H) X 582(V)
768(H) X 494(V)
752(H) X 582(V)
Scanning system 2:1 Interlace
SYNC
Synchronization Internal
Rosolution
(C : Color / B : B/W)
NTSC : 400TVL (C) / 420TVL (B)
PAL : 380TVL (C) / 400TVL (B) NTSC : 520TVL (C) / 540TVL (B) PAL : 500TVL (C) / 540TVL (B)
Video output 1.0Vp-p
S/N Ratio 50 dB (AGC Off)
Min.illumination 0.01Lux/F2.0 (IR Off)
0 Lux /F2.0 (IR On)
Gain control Auto
White balance Auto
Electrical
Shutter speed 1/60 (NTSC) ~1/120,000 per sec.
1/50 (PAL) ~ 1/100,000 per sec.
Lens Monofocal IR corrective 3.6mm/F2.0 – Standard
4.3mm, 6mm, 8mm - Optionable
Image conversion Color at day and Real B/W image at night
Day/Night
Infra-red 850nm-30°IR x 14ea - Standard
940nm-30°IR x 14ea - Option
Weatherproof IP67
Operating temp. - 20°C ~ + 50°C (- 4°F ~ + 122°F)
Environmental
Storage temp. - 40°C ~ + 70°C (- 40°F ~ + 158°F)
Dimension Ø 79 x 64mm ( Ø 3.11”x2.52”)
Physical
Weight Approx. 300g